[Thu Mar  8 00:56:13 2012] Detection parameters:
  Position = (506.7, 309.2) = 18 3 1.34 -21 38 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 264.9 +/- 20.3
  Background counts = 15.5
  Rate = 0.008 +/- 0.0006

[Thu Mar  8 00:56:15 2012] Off-axis axis estimate = 15.12'
[Thu Mar  8 16:24:25 2012] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 16:24:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 16:24:25 2012] Initial guess for spatial extent in simple fitting = 13.99"
[Thu Mar  8 16:24:25 2012] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.869
[Thu Mar  8 16:24:25 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.99"
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src5.ximg exists
[Thu Mar  8 19:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src5.csv
[Thu Mar  8 19:52:25 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Mar  8 19:52:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src5.csv
[Thu Mar  8 19:52:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Mar  8 19:52:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Mar  8 19:52:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Mar  8 19:52:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:39 2012] Warning, spatial fit 5 centroid is now closest to src. 11
[Thu Mar  8 19:53:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:39 2012] Assessing source extent using major
[Thu Mar  8 19:53:39 2012] Source does appear to be extended
[Thu Mar  8 19:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 13:52:02 2012] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 13:52:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar  9 13:52:02 2012] Initial guess for spatial extent in simple fitting = 13.99"
[Fri Mar  9 13:52:02 2012] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.869
[Fri Mar  9 13:52:02 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.99"
[Fri Mar  9 19:35:49 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src5.ximg exists
[Fri Mar  9 19:35:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src5.csv
[Fri Mar  9 19:35:49 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Mar  9 19:35:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src5.csv
[Fri Mar  9 19:35:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:35:51 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Mar  9 19:35:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Mar  9 19:35:51 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Mar  9 19:35:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Mar  9 19:35:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:37:12 2012] Warning, spatial fit 5 centroid is now closest to src. 15
[Fri Mar  9 19:37:12 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:37:12 2012] Assessing source extent using major
[Fri Mar  9 19:37:12 2012] Source does appear to be extended
[Fri Mar  9 19:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 01:49:32 2012] XMMSAS src. selection expression = ellipse(44035.922394, 26850.539032, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 10 01:49:32 2012] Writing source region out to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src14_src.reg
[Sat Mar 10 01:49:32 2012] Extracting stamp from image fullrun_mos2_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (469, 272) - (544, 347)
[Sat Mar 10 01:49:32 2012] XMMSAS bgd. selection expression = annulus(44035.922394, 26850.539032, 1087.500000, 2175.000000, X, Y) && !ellipse(43473.421200, 24867.073400, 1477.744043, 298.648809, 354.155550, X, Y) && !ellipse(41808.278800, 26748.176822, 792.412823, 792.412823, 0.000000, X, Y) && !ellipse(43904.169220, 24909.338257, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 10 01:49:32 2012] Writing fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src14.gif
[Sat Mar 10 01:50:48 2012] Mean detx,y = (-16788.75, -336.51) 
[Sat Mar 10 01:50:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 01:51:04 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 01:51:04 2012] Setting source spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Mar 10 01:51:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Mar 10 02:50:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 10 02:50:47 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:41 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:41 2012] Error reading totcts from fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Mar 10 04:28:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:45 2012] Using photon index=1.80, rate=0.00826, arf fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src14.arf
[Sat Mar 10 04:28:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:45 2012] Updating source flux to 2.9e-13
[Sat Mar 10 04:33:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting