[Thu Mar  8 00:56:13 2012] Detection parameters:
  Position = (433.8, 310.0) = 18 3 24.09 -21 38 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.9 +/- 19.9
  Background counts = 24.5
  Rate = 0.01 +/- 0.001

[Thu Mar  8 00:56:15 2012] Off-axis axis estimate = 9.85'
[Thu Mar  8 16:24:25 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 16:24:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 16:24:25 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Thu Mar  8 16:24:25 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.931
[Thu Mar  8 16:24:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.35"
[Thu Mar  8 19:52:24 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Mar  8 19:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src1.csv
[Thu Mar  8 19:52:24 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Mar  8 19:52:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src1.csv
[Thu Mar  8 19:52:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Mar  8 19:52:26 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Mar  8 19:52:26 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Mar  8 19:53:39 2012] Spatial fit model total counts = 844.701000, observed total counts = 851.000000
[Thu Mar  8 19:53:39 2012] Offset between fit and detection position for source 10 = 0.989065 pixels
[Thu Mar  8 19:53:39 2012] 847.964000 total counts/ 561.669000 bgd. counts: snr = 12.080184
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.989065 pixels
  Position = (434.6, 310.5) = 18 3 23.83 -21 38 38.7
  Extent = 12.0 (9.9-14.5)", rotation angle = 0
  Source counts = 286.3 +/- 29.1
  Background counts = 561.7
  Rate = 0.009 +/- 0.0009
[Thu Mar  8 19:53:39 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:39 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:39 2012] Source does appear to be extended
[Thu Mar  8 19:53:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:39 2012] Source is confused with source 52
[Fri Mar  9 13:52:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar  9 13:52:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar  9 13:52:02 2012] Initial guess for spatial extent in simple fitting = 11.99"
[Fri Mar  9 13:52:02 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.156
[Fri Mar  9 13:52:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.99"
[Fri Mar  9 19:35:49 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar  9 19:35:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src1.csv
[Fri Mar  9 19:35:49 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar  9 19:35:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src1.csv
[Fri Mar  9 19:35:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:35:51 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar  9 19:35:51 2012] fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar  9 19:35:51 2012] Fit fullrun_mos2_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Mar  9 19:37:12 2012] Warning, spatial fit 1 centroid is now closest to src. 52
[Fri Mar  9 19:37:12 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:37:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:37:12 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:37:12 2012] Source does appear to be extended
[Fri Mar  9 19:37:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 01:49:32 2012] XMMSAS src. selection expression = ellipse(37762.921800, 26967.828680, 719.160021, 719.160021, 0.000000, X, Y)
[Sat Mar 10 01:49:32 2012] Writing source region out to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src10_src.reg
[Sat Mar 10 01:49:32 2012] Extracting stamp from image fullrun_mos2_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (393, 269) - (476, 352)
[Sat Mar 10 01:49:32 2012] XMMSAS bgd. selection expression = annulus(37762.921800, 26967.828680, 1198.600034, 2397.200069, X, Y) && !ellipse(40011.543152, 26744.916656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39188.890289, 25094.964630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37792.400635, 27541.077637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37069.156000, 25437.317800, 807.312023, 807.312023, 0.000000, X, Y) && !ellipse(36884.176200, 25268.020000, 1280.032037, 1280.032037, 0.000000, X, Y) && !ellipse(39815.243000, 25045.042960, 636.262418, 636.262418, 0.000000, X, Y) && !ellipse(40355.311035, 27165.513123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36878.289978, 25930.013824, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 10 01:49:32 2012] Writing fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src10.gif
[Sat Mar 10 01:49:37 2012] Mean detx,y = (-10616.99, -301.16) 
[Sat Mar 10 01:49:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 01:49:48 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 01:49:49 2012] Setting source spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Mar 10 01:49:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Mar 10 04:28:41 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:41 2012] Error reading totcts from fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Mar 10 04:28:45 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:45 2012] Using photon index=1.80, rate=0.00894, arf fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src10.arf
[Sat Mar 10 04:28:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:45 2012] Updating source flux to 1.5e-13
[Sat Mar 10 04:33:33 2012] Flag c found in src. 10 procflags, skipping spectral fitting
[Sat Mar 10 04:43:09 2012] Reading fit data from xmm0503170301/analysis//spectral/fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src10_pl.csv
[Sat Mar 10 04:43:09 2012] Spectral fit parameter nH value = 2.92314e+22
[Sat Mar 10 04:43:09 2012] Spectral fit parameter PhoIndex value = 2.07789
[Sat Mar 10 04:43:09 2012] Failed to get F(0.3-8.0) from xmm0503170301/analysis//spectral/fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Sat Mar 10 04:43:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:43:09 2012] Using Nh = 2.9e+22, photon index=2.08, rate=0.00894, arf fullrun_mos2_xmm0503170301_pi300-10000_pass1_cl_src10.arf
[Sat Mar 10 04:43:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:43:09 2012] Updating source flux to 3.2e-13