[Thu Mar  8 00:55:36 2012] Detection parameters:
  Position = (306.9, 385.8) = 18 4 3.69 -21 33 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.5 +/- 15.9
  Background counts = 23.8
  Rate = 0.005 +/- 0.0007

[Thu Mar  8 00:55:37 2012] Off-axis axis estimate = 6.36'
[Thu Mar  8 09:35:07 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 09:35:07 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Thu Mar  8 09:35:07 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Thu Mar  8 09:35:07 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 9.61"
[Thu Mar  8 16:24:23 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src35.ximg exists
[Thu Mar  8 16:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src35.csv
[Thu Mar  8 16:24:23 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu Mar  8 16:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src35.csv
[Thu Mar  8 16:24:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 16:24:24 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu Mar  8 16:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src35.csv
[Thu Mar  8 16:24:24 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu Mar  8 16:24:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src35.csv
[Thu Mar  8 16:24:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:25 2012] Source 51 is offset by 7.047754 and 5.255782 pixels which is larger than
2 X fitted extent = 2.300713 x 2.300713, not incorporating fit results
[Thu Mar  8 19:53:25 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:25 2012] Assessing source extent using major
[Thu Mar  8 19:53:25 2012] Source does appear to be extended
[Thu Mar  8 19:53:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:25 2012] Source is confused with source 28
[Fri Mar  9 08:39:49 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 08:39:49 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Fri Mar  9 08:39:49 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.022
[Fri Mar  9 08:39:49 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 9.61"
[Fri Mar  9 13:52:00 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src33.ximg exists
[Fri Mar  9 13:52:00 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src33_1.ximg exists
[Fri Mar  9 13:52:00 2012] Fit fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src33 appears to have run properly
[Fri Mar  9 13:52:01 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Fri Mar  9 13:52:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri Mar  9 13:52:01 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Fri Mar  9 13:52:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src33.csv
[Fri Mar  9 13:52:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:51 2012] Warning, spatial fit 33 centroid is now closest to src. 31
[Fri Mar  9 19:36:52 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 60.914148 pixels away
[Fri Mar  9 19:36:52 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:52 2012] Assessing source extent using major
[Fri Mar  9 19:36:52 2012] Source does appear to be extended
[Fri Mar  9 19:36:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 23:52:14 2012] XMMSAS src. selection expression = ellipse(26649.266571, 33513.489044, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar  9 23:52:14 2012] Writing source region out to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src51_src.reg
[Fri Mar  9 23:52:14 2012] Extracting stamp from image fullrun_mos1_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (269, 348) - (344, 423)
[Fri Mar  9 23:52:14 2012] XMMSAS bgd. selection expression = annulus(26649.266571, 33513.489044, 1087.500000, 2175.000000, X, Y) && !ellipse(25969.094000, 33496.991000, 2544.152073, 2544.152073, 0.000000, X, Y) && !ellipse(27130.116000, 33378.636000, 750.211222, 750.211222, 0.000000, X, Y) && !ellipse(24307.240020, 35212.362800, 465.000813, 465.000813, 0.000000, X, Y) && !ellipse(29222.090851, 31048.044769, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29309.026000, 32141.375400, 1507.008043, 1507.008043, 0.000000, X, Y) && !ellipse(28198.798000, 31645.628000, 376.752011, 376.752011, 0.000000, X, Y) && !ellipse(25333.216339, 33497.527008, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 23:52:14 2012] Writing fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src51.gif
[Sat Mar 10 00:14:44 2012] Mean detx,y = (6214.08, -640.07) 
[Sat Mar 10 00:14:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 00:15:10 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 00:15:10 2012] Setting source spectrum file to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat Mar 10 00:15:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sat Mar 10 01:31:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 10 01:31:49 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:36 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:36 2012] Error reading totcts from fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sat Mar 10 04:28:39 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:39 2012] Using photon index=1.80, rate=0.00521, arf fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src51.arf
[Sat Mar 10 04:28:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:39 2012] Updating source flux to 6.9e-14
[Sat Mar 10 04:28:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting