[Thu Mar  8 00:55:36 2012] Detection parameters:
  Position = (463.3, 288.5) = 18 3 14.89 -21 40 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.9 +/- 15.4
  Background counts = 16.2
  Rate = 0.003 +/- 0.0005

[Thu Mar  8 00:55:37 2012] Off-axis axis estimate = 11.97'
[Thu Mar  8 09:35:07 2012] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 09:35:07 2012] Initial guess for spatial extent in simple fitting = 12.41"
[Thu Mar  8 09:35:07 2012] source mask rpix=2.9, npix_max = 44, mask sum = 49, frac = 1.089
[Thu Mar  8 09:35:07 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 12.41"
[Thu Mar  8 16:24:23 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src48.ximg exists
[Thu Mar  8 16:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src48.csv
[Thu Mar  8 16:24:23 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src48_1.ximg exists
[Thu Mar  8 16:24:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src48.csv
[Thu Mar  8 16:24:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 16:24:25 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Thu Mar  8 16:24:25 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Thu Mar  8 16:24:25 2012] Fit fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Thu Mar  8 19:53:25 2012] Warning, spatial fit 48 centroid is now closest to src. 59
[Thu Mar  8 19:53:25 2012] Source 43 is offset by -5.676767 and -0.211889 pixels which is larger than
2 X fitted extent = 1.668129 x 1.668129, not incorporating fit results
[Thu Mar  8 19:53:25 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:25 2012] Assessing source extent using major
[Thu Mar  8 19:53:25 2012] Source does appear to be extended
[Thu Mar  8 19:53:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:25 2012] Source is confused with source 41
[Fri Mar  9 08:39:49 2012] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 08:39:49 2012] Initial guess for spatial extent in simple fitting = 12.41"
[Fri Mar  9 08:39:49 2012] source mask rpix=2.9, npix_max = 44, mask sum = 49, frac = 1.089
[Fri Mar  9 08:39:49 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 12.41"
[Fri Mar  9 13:52:00 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src44.ximg exists
[Fri Mar  9 13:52:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src44.csv
[Fri Mar  9 13:52:00 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri Mar  9 13:52:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src44.csv
[Fri Mar  9 13:52:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 13:52:02 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri Mar  9 13:52:02 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Mar  9 13:52:02 2012] Fit fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Fri Mar  9 19:36:51 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 11.587002 pixels away
[Fri Mar  9 19:36:52 2012] Warning, spatial fit 44 centroid is now closest to src. 59
[Fri Mar  9 19:36:52 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:52 2012] Assessing source extent using major
[Fri Mar  9 19:36:52 2012] Source does appear to be extended
[Fri Mar  9 19:36:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 23:52:14 2012] XMMSAS src. selection expression = ellipse(40254.531433, 25049.460083, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar  9 23:52:14 2012] Writing source region out to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src43_src.reg
[Fri Mar  9 23:52:14 2012] Extracting stamp from image fullrun_mos1_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (426, 251) - (501, 326)
[Fri Mar  9 23:52:14 2012] XMMSAS bgd. selection expression = annulus(40254.531433, 25049.460083, 1087.500000, 2175.000000, X, Y) && !ellipse(39544.580000, 27784.904000, 1991.208057, 1991.208057, 0.000000, X, Y) && !ellipse(40292.142000, 27973.003600, 1992.200057, 1992.200057, 0.000000, X, Y) && !ellipse(39769.006226, 25067.628448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43082.522000, 25038.686000, 2150.072062, 2150.072062, 0.000000, X, Y) && !ellipse(37776.893660, 23963.875600, 578.932017, 578.932017, 0.000000, X, Y) && !ellipse(38014.180200, 25126.834800, 711.888020, 711.888020, 0.000000, X, Y) && !ellipse(42832.436000, 25073.908000, 479.605614, 479.605614, 0.000000, X, Y) && !ellipse(42685.194824, 24583.337830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38989.354218, 25084.838348, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 23:52:14 2012] Writing fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src43.gif
[Sat Mar 10 00:18:46 2012] Mean detx,y = (-2119.37, 12949.60) 
[Sat Mar 10 00:18:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 00:18:56 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 00:18:56 2012] Setting source spectrum file to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Mar 10 00:18:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Mar 10 01:44:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 10 01:44:22 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:37 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:37 2012] Error reading totcts from fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Mar 10 04:28:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:40 2012] Using photon index=1.80, rate=0.00327, arf fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src43.arf
[Sat Mar 10 04:28:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:40 2012] Updating source flux to 7.2e-14
[Sat Mar 10 04:28:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting