[Thu Mar  8 00:55:35 2012] Detection parameters:
  Position = (280.0, 405.2) = 18 4 12.08 -21 31 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.5 +/- 15.6
  Background counts = 17.5
  Rate = 0.008 +/- 0.0009

[Thu Mar  8 00:55:37 2012] Off-axis axis estimate = 7.86'
[Thu Mar  8 09:35:07 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 09:35:07 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Thu Mar  8 09:35:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Thu Mar  8 09:35:07 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.36"
[Thu Mar  8 16:24:22 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src18.ximg exists
[Thu Mar  8 16:24:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src18.csv
[Thu Mar  8 16:24:22 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Mar  8 16:24:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src18.csv
[Thu Mar  8 16:24:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 16:24:24 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Mar  8 16:24:24 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Mar  8 16:24:24 2012] Fit fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Thu Mar  8 19:53:25 2012] Spatial fit model total counts = 486.584000, observed total counts = 485.000000
[Thu Mar  8 19:53:25 2012] Offset between fit and detection position for source 25 = 0.054142 pixels
[Thu Mar  8 19:53:25 2012] 477.506800 total counts/ 400.540000 bgd. counts: snr = 3.845745
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.054142 pixels
  Position = (280.0, 405.3) = 18 4 12.08 -21 31 46.9
  Extent = 5.8 (4.2-8.1)", rotation angle = 0
  Source counts = 77.0 +/- 21.9
  Background counts = 400.5
  Rate = 0.002 +/- 0.0007
[Thu Mar  8 19:53:25 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:25 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:25 2012] Source does appear to be extended
[Thu Mar  8 19:53:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 08:39:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar  9 08:39:49 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Fri Mar  9 08:39:49 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.186
[Fri Mar  9 08:39:49 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 5.81"
[Fri Mar  9 13:52:00 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src17.ximg exists
[Fri Mar  9 13:52:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src17.csv
[Fri Mar  9 13:52:00 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Mar  9 13:52:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src17.csv
[Fri Mar  9 13:52:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 13:52:01 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Mar  9 13:52:01 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Mar  9 13:52:01 2012] Fit fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Mar  9 19:36:51 2012] Warning, spatial fit 17 centroid is now closest to src. 23
[Fri Mar  9 19:36:52 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:52 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:52 2012] Source does appear to be extended
[Fri Mar  9 19:36:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 23:52:13 2012] XMMSAS src. selection expression = ellipse(24307.240020, 35212.362800, 348.750610, 348.750610, 0.000000, X, Y)
[Fri Mar  9 23:52:13 2012] Writing source region out to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src25_src.reg
[Fri Mar  9 23:52:13 2012] Extracting stamp from image fullrun_mos1_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (260, 385) - (300, 425)
[Fri Mar  9 23:52:13 2012] XMMSAS bgd. selection expression = annulus(24307.240020, 35212.362800, 581.251017, 1162.502033, X, Y) && !ellipse(22539.496000, 35611.460200, 957.296028, 957.296028, 0.000000, X, Y) && !ellipse(23536.836792, 35874.651733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25969.094000, 33496.991000, 2544.152073, 2544.152073, 0.000000, X, Y) && !ellipse(25333.216339, 33497.527008, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 23:52:13 2012] Writing fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src25.gif
[Sat Mar 10 00:08:03 2012] Mean detx,y = (7903.16, -3129.39) 
[Sat Mar 10 00:08:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 00:08:12 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 00:08:12 2012] Setting source spectrum file to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Mar 10 00:08:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Mar 10 01:07:06 2012] Not generating rmf since there are only 76 counts
[Sat Mar 10 01:07:06 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:35 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:35 2012] Error reading totcts from fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Mar 10 04:28:38 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:38 2012] Using photon index=1.80, rate=0.0024, arf fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src25.arf
[Sat Mar 10 04:28:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:38 2012] Updating source flux to 4.4e-14
[Sat Mar 10 04:28:50 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting