[Thu Mar  8 00:55:35 2012] Detection parameters:
  Position = (238.4, 432.8) = 18 4 25.03 -21 29 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.6 +/- 16.6
  Background counts = 16.8
  Rate = 0.005 +/- 0.0005

[Thu Mar  8 00:55:37 2012] Off-axis axis estimate = 10.67'
[Thu Mar  8 09:35:07 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 09:35:07 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Thu Mar  8 09:35:07 2012] source mask rpix=2.7, npix_max = 41, mask sum = 30, frac = 0.731
[Thu Mar  8 09:35:07 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 11.76"
[Thu Mar  8 16:24:23 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src38.ximg exists
[Thu Mar  8 16:24:23 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src38_1.ximg exists
[Thu Mar  8 16:24:23 2012] Fit fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src38 appears to have run properly
[Thu Mar  8 16:24:24 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Thu Mar  8 16:24:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src38.csv
[Thu Mar  8 16:24:25 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Thu Mar  8 16:24:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src38.csv
[Thu Mar  8 16:24:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 19:53:25 2012] Warning, spatial fit 38 centroid is now closest to src. 1
[Thu Mar  8 19:53:25 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:25 2012] Assessing source extent using major
[Thu Mar  8 19:53:25 2012] Source does appear to be extended
[Thu Mar  8 19:53:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 08:39:49 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 08:39:49 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Fri Mar  9 08:39:49 2012] source mask rpix=2.7, npix_max = 41, mask sum = 30, frac = 0.731
[Fri Mar  9 08:39:49 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 11.76"
[Fri Mar  9 13:52:00 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src35.ximg exists
[Fri Mar  9 13:52:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src35.csv
[Fri Mar  9 13:52:00 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri Mar  9 13:52:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src35.csv
[Fri Mar  9 13:52:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 13:52:01 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri Mar  9 13:52:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri Mar  9 13:52:01 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri Mar  9 13:52:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Fri Mar  9 13:52:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 19:36:51 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.587421 pixels away
[Fri Mar  9 19:36:52 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:52 2012] Assessing source extent using major
[Fri Mar  9 19:36:52 2012] Source does appear to be extended
[Fri Mar  9 19:36:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 19:36:52 2012] Source is confused with source 3
[Fri Mar  9 23:52:14 2012] XMMSAS src. selection expression = ellipse(20692.069809, 37601.411102, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar  9 23:52:14 2012] Writing source region out to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src21_src.reg
[Fri Mar  9 23:52:14 2012] Extracting stamp from image fullrun_mos1_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (201, 395) - (276, 470)
[Fri Mar  9 23:52:14 2012] XMMSAS bgd. selection expression = annulus(20692.069809, 37601.411102, 1087.500000, 2175.000000, X, Y) && !ellipse(22539.496000, 35611.460200, 957.296028, 957.296028, 0.000000, X, Y) && !ellipse(23536.836792, 35874.651733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19565.442000, 39027.480000, 579.903217, 579.903217, 0.000000, X, Y) && !ellipse(19306.221600, 39382.247400, 422.019212, 422.019212, 0.000000, X, Y) && !ellipse(18944.039673, 39803.213623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21376.636800, 37988.105800, 1664.640048, 552.922416, 45.520000, X, Y) && !ellipse(20903.496400, 38507.856200, 680.401620, 680.401620, 0.000000, X, Y) && !ellipse(19812.770000, 39915.640000, 1997.696057, 645.841619, 53.721900, X, Y) && !ellipse(20446.016000, 39169.046000, 1360.800039, 1360.800039, 0.000000, X, Y) && !ellipse(17847.986496, 36391.909851, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 23:52:14 2012] Writing fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src21.gif
[Sat Mar 10 00:15:24 2012] Mean detx,y = (10258.57, -6725.20) 
[Sat Mar 10 00:15:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 00:15:45 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 00:15:45 2012] Setting source spectrum file to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Mar 10 00:15:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat Mar 10 01:35:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Mar 10 01:35:55 2012] rmf not generated due to insufficient counts
[Sat Mar 10 04:28:36 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:36 2012] Error reading totcts from fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Sat Mar 10 04:28:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:40 2012] Using photon index=1.80, rate=0.00489, arf fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src21.arf
[Sat Mar 10 04:28:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:40 2012] Updating source flux to 1.4e-13
[Sat Mar 10 04:28:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting