[Thu Mar  8 00:55:35 2012] Detection parameters:
  Position = (462.4, 323.9) = 18 3 15.15 -21 37 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 257.8 +/- 21.4
  Background counts = 18.0
  Rate = 0.02 +/- 0.001

[Thu Mar  8 00:55:37 2012] Off-axis axis estimate = 12.03'
[Thu Mar  8 09:35:07 2012] Using EEF radius (= 12.45 ")to estimate initial spatial extent for simple fitting
[Thu Mar  8 09:35:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar  8 09:35:07 2012] Initial guess for spatial extent in simple fitting = 12.45"
[Thu Mar  8 09:35:07 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.930
[Thu Mar  8 09:35:07 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.45"
[Thu Mar  8 16:24:22 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src2.ximg exists
[Thu Mar  8 16:24:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src2.csv
[Thu Mar  8 16:24:22 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Mar  8 16:24:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src2.csv
[Thu Mar  8 16:24:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar  8 16:24:23 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Mar  8 16:24:23 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Mar  8 16:24:23 2012] Fit fullrun_mos1_xmm0503170301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Mar  8 19:53:24 2012] Spatial fit model total counts = 1085.030000, observed total counts = 1081.000000
[Thu Mar  8 19:53:24 2012] Offset between fit and detection position for source 10 = 8.348742 pixels
[Thu Mar  8 19:53:24 2012] 990.220000 total counts/ 170.429000 bgd. counts: snr = 62.795916
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 8.348742 pixels
  Position = (455.1, 319.9) = 18 3 17.45 -21 37 57.8
  Extent = 24.9 (24.8-49.8)", rotation angle = 0
  Source counts = 819.8 +/- 31.5
  Background counts = 170.4
  Rate = 0.03 +/- 0.001
[Thu Mar  8 19:53:24 2012] Source 10 is offset by 0.882598 and -3.131494 pixels which is larger than
2 X fitted extent = 2.061844 x 2.061844, not incorporating fit results
[Thu Mar  8 19:53:25 2012] Vigneting correction estimate = 1.000000
[Thu Mar  8 19:53:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar  8 19:53:25 2012] Assessing source extent using major axis lower bound
[Thu Mar  8 19:53:25 2012] Source does appear to be extended
[Thu Mar  8 19:53:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar  8 19:53:25 2012] Source is confused with source 11
[Fri Mar  9 08:39:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar  9 08:39:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar  9 08:39:49 2012] Initial guess for spatial extent in simple fitting = 24.89"
[Fri Mar  9 08:39:49 2012] source mask rpix=5.7, npix_max = 154, mask sum = 143, frac = 0.923
[Fri Mar  9 08:39:49 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 24.89"
[Fri Mar  9 13:51:59 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src2.ximg exists
[Fri Mar  9 13:51:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src2.csv
[Fri Mar  9 13:51:59 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Mar  9 13:51:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src2.csv
[Fri Mar  9 13:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 13:52:01 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Mar  9 13:52:01 2012] fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Mar  9 13:52:01 2012] Fit fullrun_mos1_xmm0503170301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Mar  9 19:36:51 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.251488 pixels away
[Fri Mar  9 19:36:51 2012] Warning, spatial fit 2 centroid is now closest to src. 59
[Fri Mar  9 19:36:51 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.649508 pixels away
[Fri Mar  9 19:36:52 2012] Vigneting correction estimate = 1.000000
[Fri Mar  9 19:36:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar  9 19:36:52 2012] Assessing source extent using major axis lower bound
[Fri Mar  9 19:36:52 2012] Source does appear to be extended
[Fri Mar  9 19:36:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar  9 23:52:12 2012] XMMSAS src. selection expression = ellipse(39544.580000, 27784.904000, 1493.406043, 1493.406043, 0.000000, X, Y)
[Fri Mar  9 23:52:12 2012] Writing source region out to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src10_src.reg
[Fri Mar  9 23:52:12 2012] Extracting stamp from image fullrun_mos1_xmm0503170301_pi300-10000_cl_sm2.00.img.gz, (369, 234) - (541, 406)
[Fri Mar  9 23:52:12 2012] XMMSAS bgd. selection expression = annulus(39544.580000, 27784.904000, 2489.010072, 4978.020143, X, Y) && !ellipse(39503.804800, 28143.359400, 639.485618, 639.485618, 0.000000, X, Y) && !ellipse(40699.004800, 28987.842800, 529.735215, 529.735215, 0.000000, X, Y) && !ellipse(40176.412506, 28991.456421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38385.103800, 29194.326600, 573.976817, 573.976817, 0.000000, X, Y) && !ellipse(37799.186890, 28377.194153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40292.142000, 27973.003600, 1992.200057, 1992.200057, 0.000000, X, Y) && !ellipse(41114.650000, 29153.820000, 464.358413, 464.358413, 0.000000, X, Y) && !ellipse(42361.817566, 28915.294250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39769.006226, 25067.628448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43082.522000, 25038.686000, 2150.072062, 2150.072062, 0.000000, X, Y) && !ellipse(37776.893660, 23963.875600, 578.932017, 578.932017, 0.000000, X, Y) && !ellipse(43908.820831, 25164.160004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38014.180200, 25126.834800, 711.888020, 711.888020, 0.000000, X, Y) && !ellipse(42832.436000, 25073.908000, 479.605614, 479.605614, 0.000000, X, Y) && !ellipse(40254.531433, 25049.460083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42685.194824, 24583.337830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38989.354218, 25084.838348, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar  9 23:52:12 2012] Writing fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src10.gif
[Fri Mar  9 23:52:28 2012] Mean detx,y = (971.53, 12556.69) 
[Fri Mar  9 23:52:29 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar  9 23:53:14 2012] Binned source spectrum to 10 counts/bin
[Fri Mar  9 23:53:14 2012] Setting source spectrum file to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar  9 23:53:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Mar 10 04:28:35 2012] Updating aperture counts using extracted products
[Sat Mar 10 04:28:35 2012] Error reading totcts from fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Mar 10 04:28:38 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 04:28:38 2012] Using photon index=1.80, rate=0.0256, arf fullrun_mos1_xmm0503170301_pi300-10000_pass1_cl_src10.arf
[Sat Mar 10 04:28:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 04:28:38 2012] Updating source flux to 4e-13
[Sat Mar 10 04:28:50 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Sat Mar 10 04:28:50 2012] Flag c found in src. 10 procflags, skipping spectral fitting