[Sun Jul 15 18:55:11 2012] Detection parameters:
  Position = (342.4, 354.9) = 18 3 52.59 -21 35 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.2 +/- 20.2
  Background counts = 92.0
  Rate = 0.007 +/- 0.0009

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 5.19'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Sun Jul 15 18:58:39 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.132
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 82 for pass 0, mean size = 9.02"
[Mon Jul 16 02:33:14 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src82.ximg exists
[Mon Jul 16 02:33:14 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src82_1.ximg exists
[Mon Jul 16 02:33:14 2012] Fit fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src82 appears to have run properly
[Mon Jul 16 02:33:17 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Mon Jul 16 02:33:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src82.csv
[Mon Jul 16 02:33:17 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Mon Jul 16 02:33:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src82.csv
[Mon Jul 16 02:33:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:32 2012] Warning, spatial fit 82 centroid is now closest to src. 80
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:33 2012] Source is confused with source 80
[Mon Jul 16 08:59:15 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Mon Jul 16 08:59:15 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.132
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 82 for pass 1, mean size = 9.02"
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src82.ximg exists
[Mon Jul 16 19:18:47 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src82.csv
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src82_1.ximg exists
[Mon Jul 16 19:18:47 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src82.csv
[Mon Jul 16 19:18:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src82.csv
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src82.csv
[Mon Jul 16 19:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Warning, spatial fit 82 centroid is now closest to src. 76
[Tue Jul 17 03:16:31 2012] Source 84 is offset by -5.124276 and -2.512657 pixels which is larger than
2 X fitted extent = 1.056363 x 1.056363, not incorporating fit results
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 03:17:18 2012] XMMSAS src. selection expression = ellipse(29742.458008, 30831.128876, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 17 03:17:18 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src84_src.reg
[Tue Jul 17 03:17:18 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (305, 317) - (380, 392)
[Tue Jul 17 03:17:18 2012] XMMSAS bgd. selection expression = annulus(29742.458008, 30831.128876, 1087.500000, 2175.000000, X, Y) && !ellipse(28237.067017, 32571.973175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33423.346200, 30132.432000, 1575.752045, 477.381614, 21.225200, X, Y) && !ellipse(25790.466000, 34332.968000, 1905.320055, 1905.320055, 0.000000, X, Y) && !ellipse(26420.836400, 33832.426400, 1553.032045, 352.292010, 38.068000, X, Y) && !ellipse(27131.627000, 33306.991000, 590.192017, 590.192017, 0.000000, X, Y) && !ellipse(27294.969696, 32267.250153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.495999, 32095.511193, 1206.992035, 365.061156, 216.211166, X, Y) && !ellipse(28483.135600, 31529.251200, 1206.992035, 242.965607, 212.040000, X, Y) && !ellipse(29686.670532, 31725.613556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28855.720000, 31302.468600, 1435.944041, 247.927207, 31.150000, X, Y) && !ellipse(30596.312000, 31060.400000, 3034.400087, 3034.400087, 0.000000, X, Y) && !ellipse(29165.814850, 31089.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31602.642000, 30780.956000, 809.472023, 809.472023, 0.000000, X, Y) && !ellipse(26782.242200, 30928.656600, 1626.400047, 267.814408, 214.014000, X, Y) && !ellipse(31691.874000, 30794.812000, 1517.200044, 1517.200044, 0.000000, X, Y) && !ellipse(32105.322000, 30533.661400, 607.708017, 607.708017, 0.000000, X, Y) && !ellipse(32982.129400, 30200.432800, 1576.912045, 359.899210, 22.223000, X, Y) && !ellipse(27973.180000, 30124.924400, 1343.256039, 1343.256039, 0.000000, X, Y) && !ellipse(30944.711029, 30233.067596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28485.025513, 29875.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28928.358000, 29502.204000, 1343.256039, 1343.256039, 0.000000, X, Y) && !ellipse(32511.718000, 30376.012600, 1213.016035, 1213.016035, 0.000000, X, Y) && !ellipse(29487.442000, 29223.408000, 1346.504039, 1346.504039, 0.000000, X, Y) && !ellipse(30707.059357, 28765.839996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32566.405579, 27879.856720, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 03:17:18 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src84.gif
[Tue Jul 17 04:39:48 2012] Mean detx,y = (2573.00, -3489.50) 
[Tue Jul 17 04:39:50 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 04:40:08 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 04:40:08 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Tue Jul 17 04:40:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src84_bgd.pi.gz
[Tue Jul 17 06:29:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 17 06:29:49 2012] rmf not generated due to insufficient counts
[Tue Jul 17 11:18:23 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:23 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Tue Jul 17 11:18:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:28 2012] Using photon index=1.80, rate=0.00702, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src84.arf
[Tue Jul 17 11:18:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:29 2012] Updating source flux to 2.2e-14
[Tue Jul 17 11:37:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting