[Sun Jul 15 18:55:09 2012] Detection parameters:
  Position = (198.9, 495.0) = 18 4 37.31 -21 25 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.1 +/- 24.2
  Background counts = 70.1
  Rate = 0.008 +/- 0.0008

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 15.97'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 14.42 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 14.42"
[Sun Jul 15 18:58:39 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.100
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 14.42"
[Mon Jul 16 02:33:12 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src8.ximg exists
[Mon Jul 16 02:33:12 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Jul 16 02:33:12 2012] Fit fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src8 appears to have run properly
[Mon Jul 16 02:33:15 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Jul 16 02:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon Jul 16 02:33:15 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Jul 16 02:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Mon Jul 16 02:33:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:32 2012] Spatial fit model total counts = 1472.180000, observed total counts = 1364.000000
[Mon Jul 16 08:58:32 2012] Offset between fit and detection position for source 8 = 1.385083 pixels
[Mon Jul 16 08:58:32 2012] 1362.041000 total counts/ 759.343000 bgd. counts: snr = 21.871610
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.385083 pixels
  Position = (199.2, 496.4) = 18 4 37.23 -21 25 10.5
  Extent = 28.8 (28.2-57.7)" x 4.0 (3.6-4.4)", rotation angle = 61 (60-62) degrees
  Source counts = 602.7 +/- 36.9
  Background counts = 759.3
  Rate = 0.02 +/- 0.001
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 6.44
[Mon Jul 16 08:58:33 2012] Source is asymmetric
[Mon Jul 16 08:58:33 2012] Source is confused with source 2
[Mon Jul 16 08:59:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 16.42"
[Mon Jul 16 08:59:15 2012] source mask rpix=3.8, npix_max = 73, mask sum = 72, frac = 0.985
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 16.42"
[Mon Jul 16 19:18:44 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src8.ximg exists
[Mon Jul 16 19:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src8.csv
[Mon Jul 16 19:18:44 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src8_1.ximg exists
[Mon Jul 16 19:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src8.csv
[Mon Jul 16 19:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:48 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Mon Jul 16 19:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon Jul 16 19:18:48 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Jul 16 19:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Mon Jul 16 19:18:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Warning, spatial fit 8 centroid is now closest to src. 22
[Tue Jul 17 03:16:31 2012] Spatial fit model total counts = 1423.990000, observed total counts = 1057.000000
[Tue Jul 17 03:16:31 2012] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 6.44
[Tue Jul 17 03:16:31 2012] Source is asymmetric
[Tue Jul 17 03:17:14 2012] XMMSAS src. selection expression = ellipse(17280.308200, 43137.941800, 1729.926050, 239.974207, 61.283000, X, Y)
[Tue Jul 17 03:17:14 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src8_src.reg
[Tue Jul 17 03:17:14 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (100, 397) - (299, 596)
[Tue Jul 17 03:17:14 2012] XMMSAS bgd. selection expression = annulus(17280.308200, 43137.941800, 2883.210083, 5766.420166, X, Y) && !ellipse(16619.558868, 41962.394958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16435.090088, 43120.181549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17793.552000, 42233.766000, 289.234408, 289.234408, 0.000000, X, Y) && !ellipse(18505.922200, 42938.668000, 662.881619, 662.881619, 0.000000, X, Y) && !ellipse(19015.153305, 42154.481018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18102.188000, 41443.700000, 1866.248054, 1866.248054, 0.000000, X, Y) && !ellipse(16928.565781, 41364.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18341.554800, 41223.834000, 1098.208032, 1098.208032, 0.000000, X, Y) && !ellipse(19867.928802, 40685.084259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20237.623047, 40230.227295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18789.693527, 40481.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19686.857132, 39141.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15799.530502, 43789.296722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18052.917587, 43798.084869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18357.712960, 43245.808000, 868.240025, 868.240025, 0.000000, X, Y) && !ellipse(13998.167465, 42454.616150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13706.144775, 41722.271454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17367.399383, 40807.277536, 2087.952060, 511.776867, 238.921531, X, Y) && !ellipse(17576.946000, 40290.292000, 2037.456059, 2037.456059, 0.000000, X, Y) && !ellipse(20717.396133, 39632.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18298.718872, 39267.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20117.060822, 38739.733673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18622.895294, 38753.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21286.131287, 38824.171570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22011.004000, 37992.706000, 707.999220, 707.999220, 0.000000, X, Y) && !ellipse(20498.688095, 38244.201660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.460000, 37372.982000, 1779.480051, 1779.480051, 0.000000, X, Y) && !ellipse(21303.187195, 37315.581268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19809.376000, 37281.454000, 1692.104049, 1692.104049, 0.000000, X, Y) && !ellipse(23028.356000, 36864.524000, 1822.408052, 1822.408052, 0.000000, X, Y) && !ellipse(22662.927720, 35944.301400, 1732.032050, 261.148808, 43.877100, X, Y) && !ellipse(16841.212662, 43844.457611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.459137, 37603.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20213.673355, 36828.962189, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 03:17:14 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src8.gif
[Tue Jul 17 03:21:28 2012] Mean detx,y = (-10020.33, -15371.72) 
[Tue Jul 17 03:21:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 03:22:24 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 03:22:24 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jul 17 03:22:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue Jul 17 11:18:19 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:19 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue Jul 17 11:18:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:25 2012] Using photon index=1.80, rate=0.0217, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src8.arf
[Tue Jul 17 11:18:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:25 2012] Updating source flux to 2.1e-13
[Tue Jul 17 11:37:01 2012] Flag p found in src. 8 procflags, skipping spectral fitting
[Tue Jul 17 11:37:01 2012] Flag c found in src. 8 procflags, skipping spectral fitting
[Tue Jul 17 11:47:11 2012] Reading fit data from xmm0503170201/analysis//spectral/fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src8_pl.csv
[Tue Jul 17 11:47:11 2012] Spectral fit parameter nH value = 6.61462e+22
[Tue Jul 17 11:47:11 2012] Spectral fit parameter PhoIndex value = 3.17589
[Tue Jul 17 11:47:11 2012] Failed to get F(0.3-8.0) from xmm0503170201/analysis//spectral/fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src8_pl.csv, possibly due to different flux energy range selected
[Tue Jul 17 11:47:11 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:47:11 2012] Using Nh = 6.6e+22, photon index=3.18, rate=0.0217, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src8.arf
[Tue Jul 17 11:47:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:47:11 2012] Updating source flux to 7e-13