[Sun Jul 15 18:55:11 2012] Detection parameters:
  Position = (355.2, 358.1) = 18 3 48.60 -21 35 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 268.1 +/- 24.5
  Background counts = 87.0
  Rate = 0.01 +/- 0.001

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 5.97'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Sun Jul 15 18:58:39 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.056
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 9.42"
[Mon Jul 16 02:33:14 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src76.ximg exists
[Mon Jul 16 02:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src76.csv
[Mon Jul 16 02:33:14 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src76_1.ximg exists
[Mon Jul 16 02:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src76.csv
[Mon Jul 16 02:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Mon Jul 16 02:33:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src76.csv
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Mon Jul 16 02:33:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src76.csv
[Mon Jul 16 02:33:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:32 2012] Warning, spatial fit 76 centroid is now closest to src. 83
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:33 2012] Source is confused with source 81
[Mon Jul 16 08:58:33 2012] Source is confused with source 83
[Mon Jul 16 08:59:15 2012] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 9.42"
[Mon Jul 16 08:59:15 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.056
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 76 for pass 1, mean size = 9.42"
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src76.ximg exists
[Mon Jul 16 19:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src76.csv
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src76_1.ximg exists
[Mon Jul 16 19:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src76.csv
[Mon Jul 16 19:18:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src76.csv
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src76.csv
[Mon Jul 16 19:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Warning, spatial fit 76 centroid is now closest to src. 76
[Tue Jul 17 03:16:31 2012] Spatial fit model total counts = 3186.680000, observed total counts = 3190.000000
[Tue Jul 17 03:16:31 2012] Offset between fit and detection position for source 78 = 3.043412 pixels
[Tue Jul 17 03:16:31 2012] Warning, changing simple spatial fit ID from 76 to 81
[Tue Jul 17 03:16:31 2012] 3158.120000 total counts/ 1408.440000 bgd. counts: snr = 46.621845
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 3.043412 pixels
  Position = (352.2, 357.6) = 18 3 49.53 -21 35 14.5
  Extent = 37.9 (37.9-75.9)", rotation angle = 0
  Source counts = 1749.7 +/- 56.2
  Background counts = 1408.4
  Rate = 0.06 +/- 0.002
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 03:17:17 2012] Counts = 1749.680000, rescaling region sizes by 2.000000
[Tue Jul 17 03:17:17 2012] XMMSAS src. selection expression = ellipse(30596.312000, 31060.400000, 4551.600131, 4551.600131, 0.000000, X, Y)
[Tue Jul 17 03:17:17 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src78_src.reg
[Tue Jul 17 03:17:17 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (91, 96) - (595, 595)
[Tue Jul 17 03:17:18 2012] XMMSAS bgd. selection expression = annulus(30596.312000, 31060.400000, 15172.000437, 30344.000873, X, Y) && !ellipse(40700.430328, 28618.262848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16619.558868, 41962.394958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37911.268951, 35553.881714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38102.069977, 28020.321045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16435.090088, 43120.181549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17793.552000, 42233.766000, 289.234408, 289.234408, 0.000000, X, Y) && !ellipse(18597.490646, 25184.505493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17280.308200, 43137.941800, 2306.568066, 319.965609, 61.283000, X, Y) && !ellipse(18505.922200, 42938.668000, 662.881619, 662.881619, 0.000000, X, Y) && !ellipse(19015.153305, 42154.481018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18102.188000, 41443.700000, 1866.248054, 1866.248054, 0.000000, X, Y) && !ellipse(16928.565781, 41364.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18341.554800, 41223.834000, 1098.208032, 1098.208032, 0.000000, X, Y) && !ellipse(19867.928802, 40685.084259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20237.623047, 40230.227295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18789.693527, 40481.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19686.857132, 39141.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35984.952271, 39202.975220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38422.877167, 28756.430573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27466.179260, 21887.829956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39428.281006, 28703.141479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15799.530502, 43789.296722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18052.917587, 43798.084869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18357.712960, 43245.808000, 868.240025, 868.240025, 0.000000, X, Y) && !ellipse(13998.167465, 42454.616150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13706.144775, 41722.271454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17367.399383, 40807.277536, 2087.952060, 511.776867, 238.921531, X, Y) && !ellipse(17576.946000, 40290.292000, 2037.456059, 2037.456059, 0.000000, X, Y) && !ellipse(20717.396133, 39632.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18298.718872, 39267.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31051.801636, 14067.073441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20117.060822, 38739.733673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18622.895294, 38753.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21286.131287, 38824.171570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22011.004000, 37992.706000, 707.999220, 707.999220, 0.000000, X, Y) && !ellipse(20498.688095, 38244.201660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.460000, 37372.982000, 1779.480051, 1779.480051, 0.000000, X, Y) && !ellipse(21303.187195, 37315.581268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19809.376000, 37281.454000, 1692.104049, 1692.104049, 0.000000, X, Y) && !ellipse(23028.356000, 36864.524000, 1822.408052, 1822.408052, 0.000000, X, Y) && !ellipse(23818.772000, 36077.552000, 502.268014, 502.268014, 0.000000, X, Y) && !ellipse(22662.927720, 35944.301400, 1732.032050, 261.148808, 43.877100, X, Y) && !ellipse(38477.815033, 34040.825653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28237.067017, 32571.973175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33423.346200, 30132.432000, 1575.752045, 477.381614, 21.225200, X, Y) && !ellipse(37731.929688, 28837.608093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40118.522247, 28624.950867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40080.884552, 27897.600281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39129.746857, 27980.883240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40493.943390, 27866.647949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39427.407501, 26278.810333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40056.792816, 26214.794922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15951.501724, 22491.907532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16841.212662, 43844.457611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.459137, 37603.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30824.090393, 36637.624847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31782.319672, 36560.838745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22140.710000, 36444.872000, 644.187219, 644.187219, 0.000000, X, Y) && !ellipse(20213.673355, 36828.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21472.535583, 35435.151459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23267.600600, 35325.348000, 631.053618, 631.053618, 0.000000, X, Y) && !ellipse(21869.421780, 35005.967080, 1685.640049, 370.507211, 45.323000, X, Y) && !ellipse(23810.936707, 34954.750458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25790.466000, 34332.968000, 1905.320055, 1905.320055, 0.000000, X, Y) && !ellipse(22911.683594, 33977.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.721283, 33730.442108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26420.836400, 33832.426400, 1553.032045, 352.292010, 38.068000, X, Y) && !ellipse(23248.362000, 33658.560000, 1602.128046, 1602.128046, 0.000000, X, Y) && !ellipse(27131.627000, 33306.991000, 590.192017, 590.192017, 0.000000, X, Y) && !ellipse(26112.969600, 33011.472000, 858.424025, 858.424025, 0.000000, X, Y) && !ellipse(26569.340000, 32725.448000, 337.002410, 337.002410, 0.000000, X, Y) && !ellipse(27294.969696, 32267.250153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.495999, 32095.511193, 1206.992035, 365.061156, 216.211166, X, Y) && !ellipse(28483.135600, 31529.251200, 1206.992035, 242.965607, 212.040000, X, Y) && !ellipse(25345.362000, 31938.372000, 1413.632041, 1413.632041, 0.000000, X, Y) && !ellipse(29686.670532, 31725.613556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28855.720000, 31302.468600, 1435.944041, 247.927207, 31.150000, X, Y) && !ellipse(25827.890600, 18967.550400, 375.187211, 375.187211, 0.000000, X, Y) && !ellipse(29165.814850, 31089.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31602.642000, 30780.956000, 809.472023, 809.472023, 0.000000, X, Y) && !ellipse(26782.242200, 30928.656600, 1626.400047, 267.814408, 214.014000, X, Y) && !ellipse(31691.874000, 30794.812000, 1517.200044, 1517.200044, 0.000000, X, Y) && !ellipse(29742.458008, 30831.128876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32105.322000, 30533.661400, 607.708017, 607.708017, 0.000000, X, Y) && !ellipse(32982.129400, 30200.432800, 1576.912045, 359.899210, 22.223000, X, Y) && !ellipse(27973.180000, 30124.924400, 1343.256039, 1343.256039, 0.000000, X, Y) && !ellipse(30944.711029, 30233.067596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28485.025513, 29875.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28928.358000, 29502.204000, 1343.256039, 1343.256039, 0.000000, X, Y) && !ellipse(32913.343567, 29453.975800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32511.718000, 30376.012600, 1213.016035, 1213.016035, 0.000000, X, Y) && !ellipse(17546.553055, 21653.640442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33392.034729, 29335.428741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39809.063100, 29248.103400, 395.176811, 395.176811, 0.000000, X, Y) && !ellipse(29487.442000, 29223.408000, 1346.504039, 1346.504039, 0.000000, X, Y) && !ellipse(18661.998566, 28874.507690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30707.059357, 28765.839996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32566.405579, 27879.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36830.650787, 26597.241272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38789.698669, 26330.031158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37992.111938, 26456.535339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37303.630000, 26549.475800, 493.329614, 493.329614, 0.000000, X, Y) && !ellipse(32787.410217, 24745.724731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34101.758575, 24122.730072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37754.133698, 23921.000946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21690.082047, 22294.750366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29572.289215, 13521.195435, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 03:17:18 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src78.gif
[Tue Jul 17 04:27:11 2012] Mean detx,y = (3432.57, -3486.20) 
[Tue Jul 17 04:27:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 04:36:23 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 04:36:23 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Tue Jul 17 04:36:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Tue Jul 17 11:18:22 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:22 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Tue Jul 17 11:18:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:28 2012] Using photon index=1.80, rate=0.0629, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src78.arf
[Tue Jul 17 11:18:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:28 2012] Updating source flux to 1.8e-13
[Tue Jul 17 11:37:01 2012] Flag c found in src. 78 procflags, skipping spectral fitting