[Sun Jul 15 18:55:11 2012] Detection parameters:
  Position = (297.3, 364.8) = 18 4 6.67 -21 34 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.5 +/- 18.0
  Background counts = 90.2
  Rate = 0.005 +/- 0.0009

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 4.81'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 8.84"
[Sun Jul 15 18:58:39 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.976
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 8.84"
[Mon Jul 16 02:33:14 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src73.ximg exists
[Mon Jul 16 02:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src73.csv
[Mon Jul 16 02:33:14 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src73_1.ximg exists
[Mon Jul 16 02:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src73.csv
[Mon Jul 16 02:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Mon Jul 16 02:33:16 2012] Fit fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Mon Jul 16 08:58:32 2012] Spatial fit model total counts = 905.523000, observed total counts = 905.000000
[Mon Jul 16 08:58:32 2012] Offset between fit and detection position for source 75 = 6.094026 pixels
[Mon Jul 16 08:58:32 2012] 911.769000 total counts/ 573.421000 bgd. counts: snr = 14.129501
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 6.094026 pixels
  Position = (291.9, 367.7) = 18 4 8.35 -21 34 30.7
  Extent = 17.7 (17.6-35.3)", rotation angle = 0
  Source counts = 338.3 +/- 30.2
  Background counts = 573.4
  Rate = 0.01 +/- 0.001
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:59:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 17.67"
[Mon Jul 16 08:59:15 2012] source mask rpix=4.1, npix_max = 83, mask sum = 63, frac = 0.757
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 17.67"
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src73.ximg exists
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src73_1.ximg exists
[Mon Jul 16 19:18:47 2012] Fit fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src73 appears to have run properly
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src73.csv
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src73.csv
[Mon Jul 16 19:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Warning, spatial fit 73 centroid is now closest to src. 66
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 03:17:17 2012] XMMSAS src. selection expression = ellipse(25345.362000, 31938.372000, 1060.224031, 1060.224031, 0.000000, X, Y)
[Tue Jul 17 03:17:17 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src75_src.reg
[Tue Jul 17 03:17:17 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (231, 307) - (353, 429)
[Tue Jul 17 03:17:17 2012] XMMSAS bgd. selection expression = annulus(25345.362000, 31938.372000, 1767.040051, 3534.080102, X, Y) && !ellipse(23028.356000, 36864.524000, 1822.408052, 1822.408052, 0.000000, X, Y) && !ellipse(22662.927720, 35944.301400, 1732.032050, 261.148808, 43.877100, X, Y) && !ellipse(28237.067017, 32571.973175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21472.535583, 35435.151459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23267.600600, 35325.348000, 631.053618, 631.053618, 0.000000, X, Y) && !ellipse(21869.421780, 35005.967080, 1685.640049, 370.507211, 45.323000, X, Y) && !ellipse(23810.936707, 34954.750458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25790.466000, 34332.968000, 1905.320055, 1905.320055, 0.000000, X, Y) && !ellipse(22911.683594, 33977.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.721283, 33730.442108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26420.836400, 33832.426400, 1553.032045, 352.292010, 38.068000, X, Y) && !ellipse(23248.362000, 33658.560000, 1602.128046, 1602.128046, 0.000000, X, Y) && !ellipse(27131.627000, 33306.991000, 590.192017, 590.192017, 0.000000, X, Y) && !ellipse(26112.969600, 33011.472000, 858.424025, 858.424025, 0.000000, X, Y) && !ellipse(26569.340000, 32725.448000, 337.002410, 337.002410, 0.000000, X, Y) && !ellipse(27294.969696, 32267.250153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.495999, 32095.511193, 1206.992035, 365.061156, 216.211166, X, Y) && !ellipse(28483.135600, 31529.251200, 1206.992035, 242.965607, 212.040000, X, Y) && !ellipse(29686.670532, 31725.613556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28855.720000, 31302.468600, 1435.944041, 247.927207, 31.150000, X, Y) && !ellipse(30596.312000, 31060.400000, 3034.400087, 3034.400087, 0.000000, X, Y) && !ellipse(29165.814850, 31089.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26782.242200, 30928.656600, 1626.400047, 267.814408, 214.014000, X, Y) && !ellipse(29742.458008, 30831.128876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27973.180000, 30124.924400, 1343.256039, 1343.256039, 0.000000, X, Y) && !ellipse(28485.025513, 29875.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28928.358000, 29502.204000, 1343.256039, 1343.256039, 0.000000, X, Y) && !ellipse(29487.442000, 29223.408000, 1346.504039, 1346.504039, 0.000000, X, Y)
[Tue Jul 17 03:17:17 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src75.gif
[Tue Jul 17 04:24:54 2012] Mean detx,y = (-1466.94, -4507.77) 
[Tue Jul 17 04:24:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 04:25:31 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 04:25:31 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue Jul 17 04:25:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src75_bgd.pi.gz
[Tue Jul 17 11:18:22 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:22 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src75_src_b10.pi.gz
[Tue Jul 17 11:18:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:28 2012] Using photon index=1.80, rate=0.0122, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src75.arf
[Tue Jul 17 11:18:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:28 2012] Updating source flux to 4.2e-14