[Sun Jul 15 18:55:11 2012] Detection parameters:
  Position = (272.2, 385.0) = 18 4 14.48 -21 33 13.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.6 +/- 16.9
  Background counts = 93.2
  Rate = 0.005 +/- 0.001

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 6.56'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Sun Jul 15 18:58:39 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.005
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 9.71"
[Mon Jul 16 02:33:14 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src66.ximg exists
[Mon Jul 16 02:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src66.csv
[Mon Jul 16 02:33:14 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src66_1.ximg exists
[Mon Jul 16 02:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src66.csv
[Mon Jul 16 02:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Mon Jul 16 02:33:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src66.csv
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Mon Jul 16 02:33:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src66.csv
[Mon Jul 16 02:33:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:32 2012] Spatial fit model total counts = 940.245000, observed total counts = 944.000000
[Mon Jul 16 08:58:32 2012] Offset between fit and detection position for source 68 = 5.116437 pixels
[Mon Jul 16 08:58:32 2012] Warning, changing simple spatial fit ID from 66 to 63
[Mon Jul 16 08:58:32 2012] 918.478000 total counts/ 479.844000 bgd. counts: snr = 20.024066
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 5.116437 pixels
  Position = (267.8, 387.5) = 18 4 15.87 -21 33 4.5
  Extent = 20.0 (15.6-40.1)", rotation angle = 0
  Source counts = 438.6 +/- 30.3
  Background counts = 479.8
  Rate = 0.02 +/- 0.001
[Mon Jul 16 08:58:32 2012] Spatial fit model total counts = 916.602000, observed total counts = 762.000000
[Mon Jul 16 08:58:32 2012] Poor agreement between spatial fit and data for source 68
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:33 2012] Source is confused with source 65
[Mon Jul 16 08:59:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 20.03"
[Mon Jul 16 08:59:15 2012] source mask rpix=4.6, npix_max = 104, mask sum = 110, frac = 1.056
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 20.03"
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src66.ximg exists
[Mon Jul 16 19:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src66.csv
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src66_1.ximg exists
[Mon Jul 16 19:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src66.csv
[Mon Jul 16 19:18:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src66.csv
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src66.csv
[Mon Jul 16 19:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Spatial fit model total counts = 946.466000, observed total counts = 944.000000
[Tue Jul 17 03:16:31 2012] Offset between fit and detection position for source 68 = 0.031855 pixels
[Tue Jul 17 03:16:31 2012] Warning, changing simple spatial fit ID from 66 to 63
[Tue Jul 17 03:16:31 2012] 923.599000 total counts/ 458.569000 bgd. counts: snr = 21.715940
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.031855 pixels
  Position = (267.8, 387.4) = 18 4 15.87 -21 33 4.6
  Extent = 20.0 (20.0-40.1)", rotation angle = 0
  Source counts = 465.0 +/- 30.4
  Background counts = 458.6
  Rate = 0.02 +/- 0.001
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 03:17:17 2012] XMMSAS src. selection expression = ellipse(23248.362000, 33658.560000, 1201.596035, 1201.596035, 0.000000, X, Y)
[Tue Jul 17 03:17:17 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src68_src.reg
[Tue Jul 17 03:17:17 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (199, 318) - (337, 456)
[Tue Jul 17 03:17:17 2012] XMMSAS bgd. selection expression = annulus(23248.362000, 33658.560000, 2002.660058, 4005.320115, X, Y) && !ellipse(22011.004000, 37992.706000, 707.999220, 707.999220, 0.000000, X, Y) && !ellipse(20498.688095, 38244.201660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.460000, 37372.982000, 1779.480051, 1779.480051, 0.000000, X, Y) && !ellipse(21303.187195, 37315.581268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19809.376000, 37281.454000, 1692.104049, 1692.104049, 0.000000, X, Y) && !ellipse(23028.356000, 36864.524000, 1822.408052, 1822.408052, 0.000000, X, Y) && !ellipse(23818.772000, 36077.552000, 502.268014, 502.268014, 0.000000, X, Y) && !ellipse(22662.927720, 35944.301400, 1732.032050, 261.148808, 43.877100, X, Y) && !ellipse(23134.459137, 37603.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22140.710000, 36444.872000, 644.187219, 644.187219, 0.000000, X, Y) && !ellipse(20213.673355, 36828.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21472.535583, 35435.151459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23267.600600, 35325.348000, 631.053618, 631.053618, 0.000000, X, Y) && !ellipse(21869.421780, 35005.967080, 1685.640049, 370.507211, 45.323000, X, Y) && !ellipse(23810.936707, 34954.750458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25790.466000, 34332.968000, 1905.320055, 1905.320055, 0.000000, X, Y) && !ellipse(22911.683594, 33977.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.721283, 33730.442108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26420.836400, 33832.426400, 1553.032045, 352.292010, 38.068000, X, Y) && !ellipse(27131.627000, 33306.991000, 590.192017, 590.192017, 0.000000, X, Y) && !ellipse(26112.969600, 33011.472000, 858.424025, 858.424025, 0.000000, X, Y) && !ellipse(26569.340000, 32725.448000, 337.002410, 337.002410, 0.000000, X, Y) && !ellipse(27294.969696, 32267.250153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25345.362000, 31938.372000, 1413.632041, 1413.632041, 0.000000, X, Y) && !ellipse(26782.242200, 30928.656600, 1626.400047, 267.814408, 214.014000, X, Y) && !ellipse(27973.180000, 30124.924400, 1343.256039, 1343.256039, 0.000000, X, Y) && !ellipse(18661.998566, 28874.507690, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 03:17:17 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src68.gif
[Tue Jul 17 04:20:55 2012] Mean detx,y = (-3893.92, -6287.06) 
[Tue Jul 17 04:20:58 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 04:21:32 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 04:21:32 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Tue Jul 17 04:21:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Tue Jul 17 11:18:22 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:22 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Tue Jul 17 11:18:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:28 2012] Using photon index=1.80, rate=0.0167, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src68.arf
[Tue Jul 17 11:18:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:28 2012] Updating source flux to 6.2e-14
[Tue Jul 17 11:37:01 2012] Flag p found in src. 68 procflags, skipping spectral fitting
[Tue Jul 17 11:37:01 2012] Flag c found in src. 68 procflags, skipping spectral fitting