[Sun Jul 15 18:55:10 2012] Detection parameters:
  Position = (274.2, 402.3) = 18 4 13.85 -21 31 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.4 +/- 17.0
  Background counts = 90.7
  Rate = 0.004 +/- 0.0006

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 7.73'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Sun Jul 15 18:58:39 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.913
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 10.30"
[Mon Jul 16 02:33:13 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src61.ximg exists
[Mon Jul 16 02:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src61.csv
[Mon Jul 16 02:33:13 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src61_1.ximg exists
[Mon Jul 16 02:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src61.csv
[Mon Jul 16 02:33:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Mon Jul 16 02:33:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src61.csv
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Mon Jul 16 02:33:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src61.csv
[Mon Jul 16 02:33:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:32 2012] Warning, spatial fit 61 centroid is now closest to src. 41
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:59:15 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Mon Jul 16 08:59:15 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.913
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 10.30"
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src61.ximg exists
[Mon Jul 16 19:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src61.csv
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src61_1.ximg exists
[Mon Jul 16 19:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src61.csv
[Mon Jul 16 19:18:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src61.csv
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src61.csv
[Mon Jul 16 19:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Source 63 is offset by 4.005450 and -2.419301 pixels which is larger than
2 X fitted extent = 2.382476 x 5.925928, not incorporating fit results
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 03:17:17 2012] XMMSAS src. selection expression = ellipse(23810.936707, 34954.750458, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 17 03:17:17 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src63_src.reg
[Tue Jul 17 03:17:17 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (237, 365) - (312, 440)
[Tue Jul 17 03:17:17 2012] XMMSAS bgd. selection expression = annulus(23810.936707, 34954.750458, 1087.500000, 2175.000000, X, Y) && !ellipse(22592.460000, 37372.982000, 1779.480051, 1779.480051, 0.000000, X, Y) && !ellipse(21303.187195, 37315.581268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23028.356000, 36864.524000, 1822.408052, 1822.408052, 0.000000, X, Y) && !ellipse(23818.772000, 36077.552000, 502.268014, 502.268014, 0.000000, X, Y) && !ellipse(22662.927720, 35944.301400, 1732.032050, 261.148808, 43.877100, X, Y) && !ellipse(23134.459137, 37603.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22140.710000, 36444.872000, 644.187219, 644.187219, 0.000000, X, Y) && !ellipse(21472.535583, 35435.151459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23267.600600, 35325.348000, 631.053618, 631.053618, 0.000000, X, Y) && !ellipse(21869.421780, 35005.967080, 1685.640049, 370.507211, 45.323000, X, Y) && !ellipse(25790.466000, 34332.968000, 1905.320055, 1905.320055, 0.000000, X, Y) && !ellipse(22911.683594, 33977.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.721283, 33730.442108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26420.836400, 33832.426400, 1553.032045, 352.292010, 38.068000, X, Y) && !ellipse(23248.362000, 33658.560000, 1602.128046, 1602.128046, 0.000000, X, Y) && !ellipse(26112.969600, 33011.472000, 858.424025, 858.424025, 0.000000, X, Y) && !ellipse(25345.362000, 31938.372000, 1413.632041, 1413.632041, 0.000000, X, Y)
[Tue Jul 17 03:17:17 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src63.gif
[Tue Jul 17 04:09:52 2012] Mean detx,y = (-3404.12, -7543.96) 
[Tue Jul 17 04:09:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 04:10:13 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 04:10:13 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Tue Jul 17 04:10:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Tue Jul 17 05:50:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 17 05:50:46 2012] rmf not generated due to insufficient counts
[Tue Jul 17 11:18:22 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:22 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Tue Jul 17 11:18:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:27 2012] Using photon index=1.80, rate=0.00427, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src63.arf
[Tue Jul 17 11:18:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:27 2012] Updating source flux to 1.9e-14
[Tue Jul 17 11:37:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting