[Sun Jul 15 18:55:10 2012] Detection parameters:
  Position = (252.7, 402.1) = 18 4 20.57 -21 31 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.8 +/- 19.4
  Background counts = 87.5
  Rate = 0.004 +/- 0.0006

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 8.21'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 10.54"
[Sun Jul 15 18:58:39 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.054
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 10.54"
[Mon Jul 16 02:33:13 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src60.ximg exists
[Mon Jul 16 02:33:13 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src60_1.ximg exists
[Mon Jul 16 02:33:13 2012] Fit fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src60 appears to have run properly
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Mon Jul 16 02:33:16 2012] Fit fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Mon Jul 16 08:58:32 2012] Spatial fit model total counts = 930.002000, observed total counts = 924.000000
[Mon Jul 16 08:58:32 2012] Offset between fit and detection position for source 62 = 1.135042 pixels
[Mon Jul 16 08:58:32 2012] 917.124000 total counts/ 647.437000 bgd. counts: snr = 10.598911
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 1.135042 pixels
  Position = (251.9, 402.9) = 18 4 20.81 -21 31 57.2
  Extent = 21.1 (20.8-42.1)" x 4.6 (3.9-5.6)", rotation angle = 45 (42-48) degrees
  Source counts = 269.7 +/- 30.3
  Background counts = 647.4
  Rate = 0.01 +/- 0.001
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.72
[Mon Jul 16 08:58:33 2012] Source is asymmetric
[Mon Jul 16 08:58:33 2012] Source is confused with source 60
[Mon Jul 16 08:59:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 12.85"
[Mon Jul 16 08:59:15 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.027
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 12.85"
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src60.ximg exists
[Mon Jul 16 19:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src60.csv
[Mon Jul 16 19:18:47 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src60_1.ximg exists
[Mon Jul 16 19:18:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src60.csv
[Mon Jul 16 19:18:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src60.csv
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Mon Jul 16 19:18:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src60.csv
[Mon Jul 16 19:18:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Warning, spatial fit 60 centroid is now closest to src. 65
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.72
[Tue Jul 17 03:16:31 2012] Source is asymmetric
[Tue Jul 17 03:17:17 2012] XMMSAS src. selection expression = ellipse(21869.421780, 35005.967080, 1264.230036, 277.880408, 45.323000, X, Y)
[Tue Jul 17 03:17:17 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src62_src.reg
[Tue Jul 17 03:17:17 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (179, 330) - (325, 476)
[Tue Jul 17 03:17:17 2012] XMMSAS bgd. selection expression = annulus(21869.421780, 35005.967080, 2107.050061, 4214.100121, X, Y) && !ellipse(19686.857132, 39141.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17367.399383, 40807.277536, 2087.952060, 511.776867, 238.921531, X, Y) && !ellipse(17576.946000, 40290.292000, 2037.456059, 2037.456059, 0.000000, X, Y) && !ellipse(20717.396133, 39632.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18298.718872, 39267.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20117.060822, 38739.733673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18622.895294, 38753.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21286.131287, 38824.171570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22011.004000, 37992.706000, 707.999220, 707.999220, 0.000000, X, Y) && !ellipse(20498.688095, 38244.201660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.460000, 37372.982000, 1779.480051, 1779.480051, 0.000000, X, Y) && !ellipse(21303.187195, 37315.581268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19809.376000, 37281.454000, 1692.104049, 1692.104049, 0.000000, X, Y) && !ellipse(23028.356000, 36864.524000, 1822.408052, 1822.408052, 0.000000, X, Y) && !ellipse(23818.772000, 36077.552000, 502.268014, 502.268014, 0.000000, X, Y) && !ellipse(22662.927720, 35944.301400, 1732.032050, 261.148808, 43.877100, X, Y) && !ellipse(23134.459137, 37603.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22140.710000, 36444.872000, 644.187219, 644.187219, 0.000000, X, Y) && !ellipse(20213.673355, 36828.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21472.535583, 35435.151459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23267.600600, 35325.348000, 631.053618, 631.053618, 0.000000, X, Y) && !ellipse(23810.936707, 34954.750458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25790.466000, 34332.968000, 1905.320055, 1905.320055, 0.000000, X, Y) && !ellipse(22911.683594, 33977.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.721283, 33730.442108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26420.836400, 33832.426400, 1553.032045, 352.292010, 38.068000, X, Y) && !ellipse(23248.362000, 33658.560000, 1602.128046, 1602.128046, 0.000000, X, Y) && !ellipse(26112.969600, 33011.472000, 858.424025, 858.424025, 0.000000, X, Y) && !ellipse(25345.362000, 31938.372000, 1413.632041, 1413.632041, 0.000000, X, Y) && !ellipse(26782.242200, 30928.656600, 1626.400047, 267.814408, 214.014000, X, Y)
[Tue Jul 17 03:17:17 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src62.gif
[Tue Jul 17 04:09:12 2012] Mean detx,y = (-5100.31, -7662.95) 
[Tue Jul 17 04:09:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 04:09:39 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 04:09:39 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Tue Jul 17 04:09:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Tue Jul 17 11:18:22 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:22 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Tue Jul 17 11:18:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:27 2012] Using photon index=1.80, rate=0.00969, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src62.arf
[Tue Jul 17 11:18:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:27 2012] Updating source flux to 5.4e-14
[Tue Jul 17 11:37:01 2012] Flag c found in src. 62 procflags, skipping spectral fitting