[Sun Jul 15 18:55:10 2012] Detection parameters:
  Position = (365.9, 420.8) = 18 3 45.29 -21 30 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.3 +/- 19.6
  Background counts = 65.5
  Rate = 0.006 +/- 0.0007

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 10.13'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Sun Jul 15 18:58:39 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.912
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 11.49"
[Mon Jul 16 02:33:13 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src55.ximg exists
[Mon Jul 16 02:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src55.csv
[Mon Jul 16 02:33:13 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon Jul 16 02:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src55.csv
[Mon Jul 16 02:33:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon Jul 16 02:33:16 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Jul 16 02:33:16 2012] Fit fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Mon Jul 16 08:58:32 2012] Source 57 is offset by 0.442042 and 9.226445 pixels which is larger than
2 X fitted extent = 1.303683 x 1.303683, not incorporating fit results
[Mon Jul 16 08:58:32 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 14.493198 pixels away
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:59:15 2012] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 11.49"
[Mon Jul 16 08:59:15 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.912
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 11.49"
[Mon Jul 16 19:18:46 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src55.ximg exists
[Mon Jul 16 19:18:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src55.csv
[Mon Jul 16 19:18:46 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src55_1.ximg exists
[Mon Jul 16 19:18:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src55.csv
[Mon Jul 16 19:18:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Mon Jul 16 19:18:50 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Mon Jul 16 19:18:50 2012] Fit fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Tue Jul 17 03:16:31 2012] Source 57 is offset by 0.442042 and 9.226445 pixels which is larger than
2 X fitted extent = 1.303683 x 1.303683, not incorporating fit results
[Tue Jul 17 03:16:31 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 14.493198 pixels away
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 03:17:16 2012] XMMSAS src. selection expression = ellipse(31782.319672, 36560.838745, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 17 03:17:16 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src57_src.reg
[Tue Jul 17 03:17:16 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (328, 383) - (403, 458)
[Tue Jul 17 03:17:16 2012] XMMSAS bgd. selection expression = annulus(31782.319672, 36560.838745, 1087.500000, 2175.000000, X, Y) && !ellipse(30824.090393, 36637.624847, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 03:17:16 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src57.gif
[Tue Jul 17 04:06:22 2012] Mean detx,y = (4671.12, -9232.26) 
[Tue Jul 17 04:06:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 04:06:43 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 04:06:44 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Jul 17 04:06:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Tue Jul 17 05:42:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 17 05:42:08 2012] rmf not generated due to insufficient counts
[Tue Jul 17 11:18:21 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:21 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Jul 17 11:18:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:27 2012] Using photon index=1.80, rate=0.00553, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src57.arf
[Tue Jul 17 11:18:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:27 2012] Updating source flux to 2.5e-14
[Tue Jul 17 11:37:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting