[Sun Jul 15 18:55:10 2012] Detection parameters:
  Position = (228.5, 428.8) = 18 4 28.09 -21 30 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.8 +/- 18.9
  Background counts = 65.8
  Rate = 0.005 +/- 0.0006

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 10.72'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 11.79"
[Sun Jul 15 18:58:39 2012] source mask rpix=2.7, npix_max = 41, mask sum = 34, frac = 0.825
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 11.79"
[Mon Jul 16 02:33:13 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src37.ximg exists
[Mon Jul 16 02:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src37.csv
[Mon Jul 16 02:33:13 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src37_1.ximg exists
[Mon Jul 16 02:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src37.csv
[Mon Jul 16 02:33:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 02:33:15 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Mon Jul 16 02:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src37.csv
[Mon Jul 16 02:33:15 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Jul 16 02:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src37.csv
[Mon Jul 16 02:33:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:32 2012] Source 39 is offset by 4.076893 and -0.711771 pixels which is larger than
2 X fitted extent = 1.394414 x 1.394414, not incorporating fit results
[Mon Jul 16 08:58:32 2012] Spatial fit model total counts = 830.253000, observed total counts = 635.000000
[Mon Jul 16 08:58:32 2012] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:33 2012] Source is confused with source 59
[Mon Jul 16 08:59:15 2012] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 11.79"
[Mon Jul 16 08:59:15 2012] source mask rpix=2.7, npix_max = 41, mask sum = 34, frac = 0.825
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 11.79"
[Mon Jul 16 19:18:45 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src37.ximg exists
[Mon Jul 16 19:18:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src37.csv
[Mon Jul 16 19:18:45 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Jul 16 19:18:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src37.csv
[Mon Jul 16 19:18:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:49 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Jul 16 19:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon Jul 16 19:18:49 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Jul 16 19:18:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon Jul 16 19:18:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Source 39 is offset by 4.120640 and -3.247265 pixels which is larger than
2 X fitted extent = 1.392271 x 1.392271, not incorporating fit results
[Tue Jul 17 03:16:31 2012] Warning, spatial fit 37 centroid is now closest to src. 36
[Tue Jul 17 03:16:31 2012] Spatial fit model total counts = 853.571000, observed total counts = 822.000000
[Tue Jul 17 03:16:31 2012] Offset between fit and detection position for source 39 = 0.426858 pixels
[Tue Jul 17 03:16:31 2012] Warning, changing simple spatial fit ID from 37 to 57
[Tue Jul 17 03:16:31 2012] 835.248420 total counts/ 5.258420 bgd. counts: snr = 361.947203
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.426858 pixels
  Position = (228.3, 429.1) = 18 4 28.19 -21 30 3.4
  Extent = 21.2 (17.7-23.1)", rotation angle = 0
  Source counts = 830.0 +/- 28.9
  Background counts = 5.3
  Rate = 0.03 +/- 0.001
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 03:17:16 2012] XMMSAS src. selection expression = ellipse(19809.376000, 37281.454000, 1269.078037, 1269.078037, 0.000000, X, Y)
[Tue Jul 17 03:17:16 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src39_src.reg
[Tue Jul 17 03:17:16 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (155, 356) - (301, 502)
[Tue Jul 17 03:17:16 2012] XMMSAS bgd. selection expression = annulus(19809.376000, 37281.454000, 2115.130061, 4230.260122, X, Y) && !ellipse(16619.558868, 41962.394958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17280.308200, 43137.941800, 2306.568066, 319.965609, 61.283000, X, Y) && !ellipse(19015.153305, 42154.481018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18102.188000, 41443.700000, 1866.248054, 1866.248054, 0.000000, X, Y) && !ellipse(16928.565781, 41364.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18341.554800, 41223.834000, 1098.208032, 1098.208032, 0.000000, X, Y) && !ellipse(19867.928802, 40685.084259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20237.623047, 40230.227295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18789.693527, 40481.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19686.857132, 39141.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17367.399383, 40807.277536, 2087.952060, 511.776867, 238.921531, X, Y) && !ellipse(17576.946000, 40290.292000, 2037.456059, 2037.456059, 0.000000, X, Y) && !ellipse(20717.396133, 39632.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18298.718872, 39267.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20117.060822, 38739.733673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18622.895294, 38753.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21286.131287, 38824.171570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22011.004000, 37992.706000, 707.999220, 707.999220, 0.000000, X, Y) && !ellipse(20498.688095, 38244.201660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.460000, 37372.982000, 1779.480051, 1779.480051, 0.000000, X, Y) && !ellipse(21303.187195, 37315.581268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23028.356000, 36864.524000, 1822.408052, 1822.408052, 0.000000, X, Y) && !ellipse(23818.772000, 36077.552000, 502.268014, 502.268014, 0.000000, X, Y) && !ellipse(22662.927720, 35944.301400, 1732.032050, 261.148808, 43.877100, X, Y) && !ellipse(23134.459137, 37603.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22140.710000, 36444.872000, 644.187219, 644.187219, 0.000000, X, Y) && !ellipse(20213.673355, 36828.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21472.535583, 35435.151459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23267.600600, 35325.348000, 631.053618, 631.053618, 0.000000, X, Y) && !ellipse(21869.421780, 35005.967080, 1685.640049, 370.507211, 45.323000, X, Y) && !ellipse(23810.936707, 34954.750458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25790.466000, 34332.968000, 1905.320055, 1905.320055, 0.000000, X, Y) && !ellipse(22911.683594, 33977.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23248.362000, 33658.560000, 1602.128046, 1602.128046, 0.000000, X, Y) && !ellipse(25345.362000, 31938.372000, 1413.632041, 1413.632041, 0.000000, X, Y)
[Tue Jul 17 03:17:16 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src39.gif
[Tue Jul 17 03:54:06 2012] Mean detx,y = (-7096.28, -9872.67) 
[Tue Jul 17 03:54:09 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 03:54:51 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 03:54:51 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue Jul 17 03:54:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Tue Jul 17 11:18:20 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:20 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Tue Jul 17 11:18:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:26 2012] Using photon index=1.80, rate=0.0298, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src39.arf
[Tue Jul 17 11:18:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:26 2012] Updating source flux to 2.9e-13
[Tue Jul 17 11:37:01 2012] Flag b found in src. 39 procflags, skipping spectral fitting
[Tue Jul 17 11:37:01 2012] Flag p found in src. 39 procflags, skipping spectral fitting
[Tue Jul 17 11:37:01 2012] Flag c found in src. 39 procflags, skipping spectral fitting