[Sun Jul 15 18:55:09 2012] Detection parameters:
  Position = (191.6, 482.9) = 18 4 39.60 -21 26 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.3 +/- 22.5
  Background counts = 70.3
  Rate = 0.007 +/- 0.0007

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 15.45'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Sun Jul 15 18:58:39 2012] source mask rpix=3.3, npix_max = 56, mask sum = 32, frac = 0.568
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 14.16"
[Mon Jul 16 02:33:12 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jul 16 02:33:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src2.csv
[Mon Jul 16 02:33:12 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jul 16 02:33:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src2.csv
[Mon Jul 16 02:33:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 02:33:14 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jul 16 02:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jul 16 02:33:14 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jul 16 02:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jul 16 02:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:32 2012] Warning, spatial fit 2 centroid is now closest to src. 5
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:33 2012] Source is confused with source 8
[Mon Jul 16 08:58:33 2012] Source is confused with source 27
[Mon Jul 16 08:59:15 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Mon Jul 16 08:59:15 2012] source mask rpix=3.3, npix_max = 56, mask sum = 32, frac = 0.568
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 14.16"
[Mon Jul 16 19:18:44 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jul 16 19:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src2.csv
[Mon Jul 16 19:18:44 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jul 16 19:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src2.csv
[Mon Jul 16 19:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:48 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jul 16 19:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jul 16 19:18:48 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jul 16 19:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jul 16 19:18:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Spatial fit model total counts = 1340.870000, observed total counts = 1157.000000
[Tue Jul 17 03:16:31 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 03:17:14 2012] XMMSAS src. selection expression = ellipse(16619.558868, 41962.394958, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 17 03:17:14 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src2_src.reg
[Tue Jul 17 03:17:14 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (154, 445) - (229, 520)
[Tue Jul 17 03:17:14 2012] XMMSAS bgd. selection expression = annulus(16619.558868, 41962.394958, 1087.500000, 2175.000000, X, Y) && !ellipse(16435.090088, 43120.181549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17793.552000, 42233.766000, 289.234408, 289.234408, 0.000000, X, Y) && !ellipse(17280.308200, 43137.941800, 2306.568066, 319.965609, 61.283000, X, Y) && !ellipse(18505.922200, 42938.668000, 662.881619, 662.881619, 0.000000, X, Y) && !ellipse(19015.153305, 42154.481018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18102.188000, 41443.700000, 1866.248054, 1866.248054, 0.000000, X, Y) && !ellipse(16928.565781, 41364.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18341.554800, 41223.834000, 1098.208032, 1098.208032, 0.000000, X, Y) && !ellipse(18789.693527, 40481.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15799.530502, 43789.296722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18052.917587, 43798.084869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18357.712960, 43245.808000, 868.240025, 868.240025, 0.000000, X, Y) && !ellipse(13998.167465, 42454.616150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13706.144775, 41722.271454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17367.399383, 40807.277536, 2087.952060, 511.776867, 238.921531, X, Y) && !ellipse(17576.946000, 40290.292000, 2037.456059, 2037.456059, 0.000000, X, Y) && !ellipse(18298.718872, 39267.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16841.212662, 43844.457611, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 03:17:14 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src2.gif
[Tue Jul 17 03:18:13 2012] Mean detx,y = (-10414.18, -14425.95) 
[Tue Jul 17 03:18:15 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 03:18:29 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 03:18:30 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul 17 03:18:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jul 17 04:55:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 17 04:55:46 2012] rmf not generated due to insufficient counts
[Tue Jul 17 11:18:18 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:18 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jul 17 11:18:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:24 2012] Using photon index=1.80, rate=0.00673, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src2.arf
[Tue Jul 17 11:18:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:24 2012] Updating source flux to 1.5e-13
[Tue Jul 17 11:37:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jul 17 11:47:11 2012] xmm0503170201/analysis//spectral/fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete