[Sun Jul 15 18:55:09 2012] Detection parameters:
  Position = (195.1, 476.0) = 18 4 38.49 -21 26 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 195.1 +/- 22.2
  Background counts = 70.6
  Rate = 0.006 +/- 0.0007

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 14.89'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 13.88"
[Sun Jul 15 18:58:39 2012] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.175
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.88"
[Mon Jul 16 02:33:12 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src12.ximg exists
[Mon Jul 16 02:33:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src12.csv
[Mon Jul 16 02:33:12 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Jul 16 02:33:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src12.csv
[Mon Jul 16 02:33:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 02:33:15 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Jul 16 02:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon Jul 16 02:33:15 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jul 16 02:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon Jul 16 02:33:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:32 2012] Spatial fit model total counts = 1280.310000, observed total counts = 1123.000000
[Mon Jul 16 08:58:32 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:33 2012] Source is confused with source 11
[Mon Jul 16 08:58:33 2012] Source is confused with source 27
[Mon Jul 16 08:58:33 2012] Source is confused with source 28
[Mon Jul 16 08:59:15 2012] Using EEF radius (= 13.88 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 13.88"
[Mon Jul 16 08:59:15 2012] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.175
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 13.88"
[Mon Jul 16 19:18:44 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src12.ximg exists
[Mon Jul 16 19:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src12.csv
[Mon Jul 16 19:18:44 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Jul 16 19:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src12.csv
[Mon Jul 16 19:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:48 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Jul 16 19:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon Jul 16 19:18:48 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jul 16 19:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Mon Jul 16 19:18:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Spatial fit model total counts = 1244.100000, observed total counts = 1123.000000
[Tue Jul 17 03:16:31 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 03:17:14 2012] XMMSAS src. selection expression = ellipse(16928.565781, 41364.548737, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 17 03:17:14 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src12_src.reg
[Tue Jul 17 03:17:14 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (158, 439) - (233, 514)
[Tue Jul 17 03:17:14 2012] XMMSAS bgd. selection expression = annulus(16928.565781, 41364.548737, 1087.500000, 2175.000000, X, Y) && !ellipse(16619.558868, 41962.394958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16435.090088, 43120.181549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17793.552000, 42233.766000, 289.234408, 289.234408, 0.000000, X, Y) && !ellipse(17280.308200, 43137.941800, 2306.568066, 319.965609, 61.283000, X, Y) && !ellipse(18505.922200, 42938.668000, 662.881619, 662.881619, 0.000000, X, Y) && !ellipse(19015.153305, 42154.481018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18102.188000, 41443.700000, 1866.248054, 1866.248054, 0.000000, X, Y) && !ellipse(18341.554800, 41223.834000, 1098.208032, 1098.208032, 0.000000, X, Y) && !ellipse(19867.928802, 40685.084259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18789.693527, 40481.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19686.857132, 39141.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15799.530502, 43789.296722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18052.917587, 43798.084869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18357.712960, 43245.808000, 868.240025, 868.240025, 0.000000, X, Y) && !ellipse(13998.167465, 42454.616150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17367.399383, 40807.277536, 2087.952060, 511.776867, 238.921531, X, Y) && !ellipse(17576.946000, 40290.292000, 2037.456059, 2037.456059, 0.000000, X, Y) && !ellipse(18298.718872, 39267.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18622.895294, 38753.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16841.212662, 43844.457611, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 03:17:14 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src12.gif
[Tue Jul 17 03:30:22 2012] Mean detx,y = (-10164.34, -13920.26) 
[Tue Jul 17 03:30:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 03:30:35 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 03:30:35 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jul 17 03:30:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue Jul 17 05:05:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 17 05:05:40 2012] rmf not generated due to insufficient counts
[Tue Jul 17 11:18:19 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:19 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue Jul 17 11:18:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:25 2012] Using photon index=1.80, rate=0.00649, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src12.arf
[Tue Jul 17 11:18:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:25 2012] Updating source flux to 6e-14
[Tue Jul 17 11:37:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting