[Sun Jul 15 18:55:09 2012] Detection parameters:
  Position = (210.0, 477.2) = 18 4 33.86 -21 26 32.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.7 +/- 23.3
  Background counts = 71.8
  Rate = 0.007 +/- 0.0008

[Sun Jul 15 18:55:11 2012] Off-axis axis estimate = 14.46'
[Sun Jul 15 18:58:39 2012] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Sun Jul 15 18:58:39 2012] Initial guess for spatial extent in simple fitting = 13.66"
[Sun Jul 15 18:58:39 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.057
[Sun Jul 15 18:58:39 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.66"
[Mon Jul 16 02:33:12 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jul 16 02:33:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src11.csv
[Mon Jul 16 02:33:12 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jul 16 02:33:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src11.csv
[Mon Jul 16 02:33:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 02:33:15 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jul 16 02:33:15 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jul 16 02:33:15 2012] Fit fullrun_pn_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Jul 16 08:58:32 2012] Spatial fit model total counts = 1408.150000, observed total counts = 1407.000000
[Mon Jul 16 08:58:32 2012] Offset between fit and detection position for source 11 = 1.640697 pixels
[Mon Jul 16 08:58:32 2012] Warning, changing simple spatial fit ID from 11 to 6
[Mon Jul 16 08:58:32 2012] 1343.493000 total counts/ 1182.810000 bgd. counts: snr = 4.672103
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.640697 pixels
  Position = (209.0, 478.5) = 18 4 34.16 -21 26 28.5
  Extent = 6.5 (5.3-8.2)", rotation angle = 0
  Source counts = 160.7 +/- 36.7
  Background counts = 1182.8
  Rate = 0.006 +/- 0.001
[Mon Jul 16 08:58:32 2012] Spatial fit model total counts = 1327.600000, observed total counts = 1297.000000
[Mon Jul 16 08:58:32 2012] Offset between fit and detection position for source 11 = 1.615151 pixels
[Mon Jul 16 08:58:32 2012] Warning, changing simple spatial fit ID from 6 to 13
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.615151 pixels
  Position = (208.6, 476.9) = 18 4 34.29 -21 26 35.2
  Extent = 23.3" x 23.3", rotation angle = 0
  Source counts = 1205.0 +/- 34.7
  Background counts = 0.0
  Rate = 0.04 +/- 0.001
[Mon Jul 16 08:58:33 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:33 2012] Assessing source extent using major
[Mon Jul 16 08:58:33 2012] Source does appear to be extended
[Mon Jul 16 08:58:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:33 2012] Source is confused with source 6
[Mon Jul 16 08:59:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 08:59:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 16 08:59:15 2012] Initial guess for spatial extent in simple fitting = 23.33"
[Mon Jul 16 08:59:15 2012] source mask rpix=5.4, npix_max = 137, mask sum = 132, frac = 0.960
[Mon Jul 16 08:59:15 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 23.33"
[Mon Jul 16 19:18:44 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jul 16 19:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src11.csv
[Mon Jul 16 19:18:44 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jul 16 19:18:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src11.csv
[Mon Jul 16 19:18:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 19:18:48 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jul 16 19:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jul 16 19:18:48 2012] fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jul 16 19:18:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jul 16 19:18:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:31 2012] Warning, spatial fit 11 centroid is now closest to src. 5
[Tue Jul 17 03:16:31 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:31 2012] Assessing source extent using major
[Tue Jul 17 03:16:31 2012] Source does appear to be extended
[Tue Jul 17 03:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 03:17:14 2012] Counts = 1205.010000, rescaling region sizes by 2.000000
[Tue Jul 17 03:17:14 2012] XMMSAS src. selection expression = ellipse(18102.188000, 41443.700000, 2799.372081, 2799.372081, 0.000000, X, Y)
[Tue Jul 17 03:17:14 2012] Writing source region out to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src11_src.reg
[Tue Jul 17 03:17:14 2012] Extracting stamp from image fullrun_pn_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (48, 316) - (370, 595)
[Tue Jul 17 03:17:14 2012] XMMSAS bgd. selection expression = annulus(18102.188000, 41443.700000, 9331.240269, 18662.480537, X, Y) && !ellipse(16619.558868, 41962.394958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16435.090088, 43120.181549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17793.552000, 42233.766000, 289.234408, 289.234408, 0.000000, X, Y) && !ellipse(18597.490646, 25184.505493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17280.308200, 43137.941800, 2306.568066, 319.965609, 61.283000, X, Y) && !ellipse(18505.922200, 42938.668000, 662.881619, 662.881619, 0.000000, X, Y) && !ellipse(19015.153305, 42154.481018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16928.565781, 41364.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18341.554800, 41223.834000, 1098.208032, 1098.208032, 0.000000, X, Y) && !ellipse(19867.928802, 40685.084259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20237.623047, 40230.227295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18789.693527, 40481.706360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19686.857132, 39141.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35984.952271, 39202.975220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15799.530502, 43789.296722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18052.917587, 43798.084869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18357.712960, 43245.808000, 868.240025, 868.240025, 0.000000, X, Y) && !ellipse(13998.167465, 42454.616150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13706.144775, 41722.271454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17367.399383, 40807.277536, 2087.952060, 511.776867, 238.921531, X, Y) && !ellipse(17576.946000, 40290.292000, 2037.456059, 2037.456059, 0.000000, X, Y) && !ellipse(20717.396133, 39632.784637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18298.718872, 39267.009216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20117.060822, 38739.733673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18622.895294, 38753.184052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21286.131287, 38824.171570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22011.004000, 37992.706000, 707.999220, 707.999220, 0.000000, X, Y) && !ellipse(20498.688095, 38244.201660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22592.460000, 37372.982000, 1779.480051, 1779.480051, 0.000000, X, Y) && !ellipse(21303.187195, 37315.581268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19809.376000, 37281.454000, 1692.104049, 1692.104049, 0.000000, X, Y) && !ellipse(23028.356000, 36864.524000, 1822.408052, 1822.408052, 0.000000, X, Y) && !ellipse(23818.772000, 36077.552000, 502.268014, 502.268014, 0.000000, X, Y) && !ellipse(22662.927720, 35944.301400, 1732.032050, 261.148808, 43.877100, X, Y) && !ellipse(28237.067017, 32571.973175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33423.346200, 30132.432000, 1575.752045, 477.381614, 21.225200, X, Y) && !ellipse(15951.501724, 22491.907532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16841.212662, 43844.457611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.459137, 37603.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30824.090393, 36637.624847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31782.319672, 36560.838745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22140.710000, 36444.872000, 644.187219, 644.187219, 0.000000, X, Y) && !ellipse(20213.673355, 36828.962189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21472.535583, 35435.151459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23267.600600, 35325.348000, 631.053618, 631.053618, 0.000000, X, Y) && !ellipse(21869.421780, 35005.967080, 1685.640049, 370.507211, 45.323000, X, Y) && !ellipse(23810.936707, 34954.750458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25790.466000, 34332.968000, 1905.320055, 1905.320055, 0.000000, X, Y) && !ellipse(22911.683594, 33977.423553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25109.721283, 33730.442108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26420.836400, 33832.426400, 1553.032045, 352.292010, 38.068000, X, Y) && !ellipse(23248.362000, 33658.560000, 1602.128046, 1602.128046, 0.000000, X, Y) && !ellipse(27131.627000, 33306.991000, 590.192017, 590.192017, 0.000000, X, Y) && !ellipse(26112.969600, 33011.472000, 858.424025, 858.424025, 0.000000, X, Y) && !ellipse(26569.340000, 32725.448000, 337.002410, 337.002410, 0.000000, X, Y) && !ellipse(27294.969696, 32267.250153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.495999, 32095.511193, 1206.992035, 365.061156, 216.211166, X, Y) && !ellipse(28483.135600, 31529.251200, 1206.992035, 242.965607, 212.040000, X, Y) && !ellipse(25345.362000, 31938.372000, 1413.632041, 1413.632041, 0.000000, X, Y) && !ellipse(29686.670532, 31725.613556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28855.720000, 31302.468600, 1435.944041, 247.927207, 31.150000, X, Y) && !ellipse(30596.312000, 31060.400000, 3034.400087, 3034.400087, 0.000000, X, Y) && !ellipse(29165.814850, 31089.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31602.642000, 30780.956000, 809.472023, 809.472023, 0.000000, X, Y) && !ellipse(26782.242200, 30928.656600, 1626.400047, 267.814408, 214.014000, X, Y) && !ellipse(31691.874000, 30794.812000, 1517.200044, 1517.200044, 0.000000, X, Y) && !ellipse(29742.458008, 30831.128876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32105.322000, 30533.661400, 607.708017, 607.708017, 0.000000, X, Y) && !ellipse(32982.129400, 30200.432800, 1576.912045, 359.899210, 22.223000, X, Y) && !ellipse(27973.180000, 30124.924400, 1343.256039, 1343.256039, 0.000000, X, Y) && !ellipse(30944.711029, 30233.067596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28485.025513, 29875.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28928.358000, 29502.204000, 1343.256039, 1343.256039, 0.000000, X, Y) && !ellipse(32913.343567, 29453.975800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32511.718000, 30376.012600, 1213.016035, 1213.016035, 0.000000, X, Y) && !ellipse(33392.034729, 29335.428741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29487.442000, 29223.408000, 1346.504039, 1346.504039, 0.000000, X, Y) && !ellipse(18661.998566, 28874.507690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30707.059357, 28765.839996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32566.405579, 27879.856720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36830.650787, 26597.241272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32787.410217, 24745.724731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34101.758575, 24122.730072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21690.082047, 22294.750366, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 03:17:14 2012] Writing fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src11.gif
[Tue Jul 17 03:24:01 2012] Mean detx,y = (-9102.21, -13977.61) 
[Tue Jul 17 03:24:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 03:30:06 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 03:30:07 2012] Setting source spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jul 17 03:30:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jul 17 11:18:19 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:19 2012] Error reading totcts from fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jul 17 11:18:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:25 2012] Using photon index=1.80, rate=0.0433, arf fullrun_pn_xmm0503170201_pi300-10000_pass1_cl_src11.arf
[Tue Jul 17 11:18:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:25 2012] Updating source flux to 3e-13
[Tue Jul 17 11:37:01 2012] Flag c found in src. 11 procflags, skipping spectral fitting