[Sun Jul 15 18:56:18 2012] Detection parameters:
  Position = (207.9, 447.0) = 18 4 34.54 -21 28 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 175.1 +/- 20.4
  Background counts = 48.8
  Rate = 0.006 +/- 0.0006

[Sun Jul 15 18:56:19 2012] Off-axis axis estimate = 12.61'
[Mon Jul 16 06:27:56 2012] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 06:27:56 2012] Initial guess for spatial extent in simple fitting = 12.74"
[Mon Jul 16 06:27:56 2012] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.894
[Mon Jul 16 06:27:56 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.74"
[Mon Jul 16 08:58:07 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src15.ximg exists
[Mon Jul 16 08:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src15.csv
[Mon Jul 16 08:58:07 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon Jul 16 08:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src15.csv
[Mon Jul 16 08:58:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:08 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon Jul 16 08:58:08 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon Jul 16 08:58:08 2012] Fit fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Jul 16 08:58:53 2012] Spatial fit model total counts = 1158.650000, observed total counts = 1092.000000
[Mon Jul 16 08:58:53 2012] Offset between fit and detection position for source 4 = 0.339030 pixels
[Mon Jul 16 08:58:53 2012] Warning, changing simple spatial fit ID from 15 to 11
[Mon Jul 16 08:58:53 2012] 1163.126100 total counts/ 90.286100 bgd. counts: snr = 112.907947
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.339030 pixels
  Position = (208.2, 447.1) = 18 4 34.44 -21 28 45.1
  Extent = 23.4 (21.4-25.9)", rotation angle = 0
  Source counts = 1072.8 +/- 34.1
  Background counts = 90.3
  Rate = 0.03 +/- 0.001
[Mon Jul 16 08:58:53 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:53 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 08:58:53 2012] Source does appear to be extended
[Mon Jul 16 08:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:53 2012] Source is confused with source 2
[Mon Jul 16 23:27:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 23:27:05 2012] Initial guess for spatial extent in simple fitting = 23.36"
[Mon Jul 16 23:27:05 2012] source mask rpix=5.4, npix_max = 137, mask sum = 144, frac = 1.045
[Mon Jul 16 23:27:05 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 23.36"
[Tue Jul 17 03:16:03 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src15.ximg exists
[Tue Jul 17 03:16:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src15.csv
[Tue Jul 17 03:16:03 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Jul 17 03:16:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src15.csv
[Tue Jul 17 03:16:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:05 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Jul 17 03:16:05 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Jul 17 03:16:05 2012] Fit fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Tue Jul 17 03:16:54 2012] Warning, spatial fit 15 centroid is now closest to src. 20
[Tue Jul 17 03:16:54 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:54 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:54 2012] Source does appear to be extended
[Tue Jul 17 03:16:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 08:40:24 2012] Counts = 1072.840000, rescaling region sizes by 2.000000
[Tue Jul 17 08:40:24 2012] XMMSAS src. selection expression = ellipse(18063.206000, 38847.552000, 2802.888081, 2802.888081, 0.000000, X, Y)
[Tue Jul 17 08:40:24 2012] Writing source region out to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src4_src.reg
[Tue Jul 17 08:40:24 2012] Extracting stamp from image fullrun_mos2_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (47, 286) - (369, 595)
[Tue Jul 17 08:40:24 2012] XMMSAS bgd. selection expression = annulus(18063.206000, 38847.552000, 9342.960269, 18685.920538, X, Y) && !ellipse(37766.870720, 26902.874600, 1187.272034, 254.402407, 9.110606, X, Y) && !ellipse(27416.005000, 21910.648400, 353.736010, 353.736010, 0.000000, X, Y) && !ellipse(18572.648865, 25175.499634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22633.835400, 33650.474000, 774.508022, 774.508022, 0.000000, X, Y) && !ellipse(31955.515198, 28321.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17786.262000, 39141.906000, 1964.736057, 1964.736057, 0.000000, X, Y) && !ellipse(17209.150000, 40034.824000, 2374.728068, 2374.728068, 0.000000, X, Y) && !ellipse(30043.299377, 28804.558289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28752.060000, 29655.480800, 1345.784039, 1345.784039, 0.000000, X, Y) && !ellipse(18553.422000, 38120.232000, 2190.040063, 2190.040063, 0.000000, X, Y) && !ellipse(31742.270400, 28475.316800, 1504.272043, 1504.272043, 0.000000, X, Y) && !ellipse(19053.072000, 37311.868000, 1873.640054, 1873.640054, 0.000000, X, Y) && !ellipse(18116.346000, 38560.916000, 1779.544051, 1779.544051, 0.000000, X, Y) && !ellipse(17568.864000, 39513.118000, 1533.944044, 1533.944044, 0.000000, X, Y) && !ellipse(25721.604000, 31516.514600, 2494.080072, 2494.080072, 0.000000, X, Y) && !ellipse(28293.944000, 29874.322000, 1367.080039, 1367.080039, 0.000000, X, Y) && !ellipse(26047.846000, 31082.973360, 339.660810, 339.660810, 0.000000, X, Y) && !ellipse(35933.861542, 39256.628052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32972.414000, 31057.412000, 1602.416046, 1602.416046, 0.000000, X, Y) && !ellipse(20476.956680, 35708.855774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31789.482941, 36584.864105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.728000, 31085.630000, 1390.384040, 1390.384040, 0.000000, X, Y) && !ellipse(36974.684000, 25573.924600, 1739.712050, 1739.712050, 0.000000, X, Y) && !ellipse(36575.183868, 25517.592194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21667.088200, 22356.291400, 423.027212, 423.027212, 0.000000, X, Y) && !ellipse(25122.768097, 36227.544952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32202.550000, 29601.646800, 1496.048043, 1496.048043, 0.000000, X, Y) && !ellipse(33166.644000, 30474.248000, 2992.096086, 2992.096086, 0.000000, X, Y) && !ellipse(32747.097020, 24699.610200, 269.392008, 269.392008, 0.000000, X, Y) && !ellipse(19903.062000, 40852.766000, 2113.904061, 2113.904061, 0.000000, X, Y) && !ellipse(21405.567780, 38848.316406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30269.386600, 27884.833600, 700.644820, 700.644820, 0.000000, X, Y) && !ellipse(21659.159000, 38534.506206, 1446.432042, 719.918421, 35.644900, X, Y) && !ellipse(28495.921400, 31599.169400, 986.992028, 986.992028, 0.000000, X, Y) && !ellipse(17514.049800, 21555.453400, 452.117676, 452.117676, 0.000000, X, Y) && !ellipse(28620.578033, 30212.509705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30572.464360, 23441.673400, 477.344814, 477.344814, 0.000000, X, Y) && !ellipse(20946.980000, 39094.072000, 1941.680056, 1941.680056, 0.000000, X, Y) && !ellipse(15965.489746, 22536.931519, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 08:40:24 2012] Writing fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src4.gif
[Tue Jul 17 08:53:42 2012] Mean detx,y = (8976.11, 11244.44) 
[Tue Jul 17 08:53:43 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 08:58:31 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 08:58:32 2012] Setting source spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jul 17 08:58:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jul 17 11:18:37 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:37 2012] Error reading totcts from fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jul 17 11:18:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:40 2012] Using photon index=1.80, rate=0.0339, arf fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src4.arf
[Tue Jul 17 11:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:40 2012] Updating source flux to 7.9e-13
[Tue Jul 17 11:26:50 2012] Flag c found in src. 4 procflags, skipping spectral fitting