[Sun Jul 15 18:56:19 2012] Detection parameters:
  Position = (323.6, 344.9) = 18 3 58.45 -21 36 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.8 +/- 14.9
  Background counts = 29.6
  Rate = 0.004 +/- 0.0006

[Sun Jul 15 18:56:19 2012] Off-axis axis estimate = 3.83'
[Mon Jul 16 06:27:56 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 06:27:56 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Mon Jul 16 06:27:56 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.855
[Mon Jul 16 06:27:56 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 8.34"
[Mon Jul 16 08:58:07 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src26.ximg exists
[Mon Jul 16 08:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src26.csv
[Mon Jul 16 08:58:07 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon Jul 16 08:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src26.csv
[Mon Jul 16 08:58:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:09 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon Jul 16 08:58:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jul 16 08:58:09 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon Jul 16 08:58:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon Jul 16 08:58:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:53 2012] Spatial fit model total counts = 603.536000, observed total counts = 543.000000
[Mon Jul 16 08:58:53 2012] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 16 08:58:53 2012] Spatial fit model total counts = 701.569000, observed total counts = 703.000000
[Mon Jul 16 08:58:53 2012] Offset between fit and detection position for source 38 = 2.339512 pixels
[Mon Jul 16 08:58:53 2012] Warning, changing simple spatial fit ID from 26 to 56
[Mon Jul 16 08:58:53 2012] 647.436000 total counts/ 389.044000 bgd. counts: snr = 13.100254
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 2.339512 pixels
  Position = (325.8, 343.9) = 18 3 57.78 -21 36 13.8
  Extent = 17.1 (17.0-34.2)", rotation angle = 0
  Source counts = 258.4 +/- 25.4
  Background counts = 389.0
  Rate = 0.008 +/- 0.0008
[Mon Jul 16 08:58:53 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:53 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 08:58:53 2012] Source does appear to be extended
[Mon Jul 16 08:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:53 2012] Source is confused with source 41
[Mon Jul 16 23:27:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 23:27:05 2012] Initial guess for spatial extent in simple fitting = 17.09"
[Mon Jul 16 23:27:05 2012] source mask rpix=3.9, npix_max = 78, mask sum = 64, frac = 0.816
[Mon Jul 16 23:27:05 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 17.09"
[Tue Jul 17 03:16:04 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src26.ximg exists
[Tue Jul 17 03:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src26.csv
[Tue Jul 17 03:16:04 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Jul 17 03:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src26.csv
[Tue Jul 17 03:16:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:05 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Jul 17 03:16:05 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Jul 17 03:16:05 2012] Fit fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Tue Jul 17 03:16:54 2012] Source 38 is offset by 2.385756 and -1.057353 pixels which is larger than
2 X fitted extent = 2.352855 x 2.352855, not incorporating fit results
[Tue Jul 17 03:16:54 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:54 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:54 2012] Source does appear to be extended
[Tue Jul 17 03:16:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 08:40:24 2012] XMMSAS src. selection expression = ellipse(28293.944000, 29874.322000, 1025.310030, 1025.310030, 0.000000, X, Y)
[Tue Jul 17 08:40:24 2012] Writing source region out to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src38_src.reg
[Tue Jul 17 08:40:24 2012] Extracting stamp from image fullrun_mos2_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (267, 285) - (385, 403)
[Tue Jul 17 08:40:24 2012] XMMSAS bgd. selection expression = annulus(28293.944000, 29874.322000, 1708.850049, 3417.700098, X, Y) && !ellipse(31955.515198, 28321.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30043.299377, 28804.558289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28752.060000, 29655.480800, 1345.784039, 1345.784039, 0.000000, X, Y) && !ellipse(31742.270400, 28475.316800, 1504.272043, 1504.272043, 0.000000, X, Y) && !ellipse(25721.604000, 31516.514600, 2494.080072, 2494.080072, 0.000000, X, Y) && !ellipse(26047.846000, 31082.973360, 339.660810, 339.660810, 0.000000, X, Y) && !ellipse(32972.414000, 31057.412000, 1602.416046, 1602.416046, 0.000000, X, Y) && !ellipse(26088.728000, 31085.630000, 1390.384040, 1390.384040, 0.000000, X, Y) && !ellipse(32202.550000, 29601.646800, 1496.048043, 1496.048043, 0.000000, X, Y) && !ellipse(33166.644000, 30474.248000, 2992.096086, 2992.096086, 0.000000, X, Y) && !ellipse(30269.386600, 27884.833600, 700.644820, 700.644820, 0.000000, X, Y) && !ellipse(28495.921400, 31599.169400, 986.992028, 986.992028, 0.000000, X, Y) && !ellipse(28620.578033, 30212.509705, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 08:40:24 2012] Writing fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src38.gif
[Tue Jul 17 09:04:07 2012] Mean detx,y = (-1236.38, 2350.77) 
[Tue Jul 17 09:04:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 09:04:20 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 09:04:20 2012] Setting source spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Jul 17 09:04:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue Jul 17 11:18:38 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:38 2012] Error reading totcts from fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue Jul 17 11:18:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:41 2012] Using photon index=1.80, rate=0.00817, arf fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src38.arf
[Tue Jul 17 11:18:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:41 2012] Updating source flux to 8.1e-14
[Tue Jul 17 11:26:50 2012] Flag b found in src. 38 procflags, skipping spectral fitting
[Tue Jul 17 11:26:50 2012] Flag p found in src. 38 procflags, skipping spectral fitting
[Tue Jul 17 11:26:50 2012] Flag c found in src. 38 procflags, skipping spectral fitting