[Sun Jul 15 18:56:18 2012] Detection parameters:
  Position = (376.7, 358.9) = 18 3 41.89 -21 35 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.7 +/- 12.9
  Background counts = 26.0
  Rate = 0.002 +/- 0.0005

[Sun Jul 15 18:56:19 2012] Off-axis axis estimate = 7.17'
[Mon Jul 16 06:27:56 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 06:27:56 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Mon Jul 16 06:27:56 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.146
[Mon Jul 16 06:27:56 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 10.02"
[Mon Jul 16 08:58:08 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src43.ximg exists
[Mon Jul 16 08:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src43.csv
[Mon Jul 16 08:58:08 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src43_1.ximg exists
[Mon Jul 16 08:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src43.csv
[Mon Jul 16 08:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:09 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Mon Jul 16 08:58:09 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Mon Jul 16 08:58:09 2012] Fit fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Mon Jul 16 08:58:53 2012] Source 33 is offset by 3.127820 and 9.245267 pixels which is larger than
2 X fitted extent = 1.519407 x 1.519407, not incorporating fit results
[Mon Jul 16 08:58:53 2012] Warning, spatial fit 43 centroid is now closest to src. 36
[Mon Jul 16 08:58:53 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:53 2012] Assessing source extent using major
[Mon Jul 16 08:58:53 2012] Source does appear to be extended
[Mon Jul 16 08:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:53 2012] Source is confused with source 36
[Mon Jul 16 23:27:05 2012] Using EEF radius (= 10.02 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 23:27:05 2012] Initial guess for spatial extent in simple fitting = 10.02"
[Mon Jul 16 23:27:05 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.146
[Mon Jul 16 23:27:05 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 10.02"
[Tue Jul 17 03:16:04 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src42.ximg exists
[Tue Jul 17 03:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src42.csv
[Tue Jul 17 03:16:04 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src42_1.ximg exists
[Tue Jul 17 03:16:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src42.csv
[Tue Jul 17 03:16:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:05 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Tue Jul 17 03:16:05 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Tue Jul 17 03:16:05 2012] Fit fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Tue Jul 17 03:16:54 2012] Spatial fit model total counts = 1340.420000, observed total counts = 1315.000000
[Tue Jul 17 03:16:54 2012] Offset between fit and detection position for source 33 = 9.524886 pixels
[Tue Jul 17 03:16:54 2012] Warning, changing simple spatial fit ID from 42 to 41
[Tue Jul 17 03:16:54 2012] 1231.232000 total counts/ 711.263000 bgd. counts: snr = 19.496755
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 9.524886 pixels
  Position = (381.8, 350.8) = 18 3 40.31 -21 35 43.7
  Extent = 37.4 (34.8-74.8)", rotation angle = 0
  Source counts = 520.0 +/- 35.1
  Background counts = 711.3
  Rate = 0.02 +/- 0.001
[Tue Jul 17 03:16:54 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:54 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:54 2012] Source does appear to be extended
[Tue Jul 17 03:16:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 08:40:25 2012] XMMSAS src. selection expression = ellipse(33166.644000, 30474.248000, 2244.072065, 2244.072065, 0.000000, X, Y)
[Tue Jul 17 08:40:25 2012] Writing source region out to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src33_src.reg
[Tue Jul 17 08:40:25 2012] Extracting stamp from image fullrun_mos2_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (253, 222) - (511, 480)
[Tue Jul 17 08:40:25 2012] XMMSAS bgd. selection expression = annulus(33166.644000, 30474.248000, 3740.120108, 7480.240215, X, Y) && !ellipse(37766.870720, 26902.874600, 1187.272034, 254.402407, 9.110606, X, Y) && !ellipse(40106.257400, 26720.054400, 1970.160057, 246.269607, 1.285800, X, Y) && !ellipse(41015.733964, 26741.046600, 525.660015, 525.660015, 0.000000, X, Y) && !ellipse(31955.515198, 28321.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30043.299377, 28804.558289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40575.566600, 26722.496200, 293.973608, 293.973608, 0.000000, X, Y) && !ellipse(28752.060000, 29655.480800, 1345.784039, 1345.784039, 0.000000, X, Y) && !ellipse(37910.106049, 35598.499481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31742.270400, 28475.316800, 1504.272043, 1504.272043, 0.000000, X, Y) && !ellipse(38857.991800, 25116.004600, 467.489613, 467.489613, 0.000000, X, Y) && !ellipse(25721.604000, 31516.514600, 2494.080072, 2494.080072, 0.000000, X, Y) && !ellipse(28293.944000, 29874.322000, 1367.080039, 1367.080039, 0.000000, X, Y) && !ellipse(26047.846000, 31082.973360, 339.660810, 339.660810, 0.000000, X, Y) && !ellipse(39428.012848, 25095.755829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37735.301575, 27484.429932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32972.414000, 31057.412000, 1602.416046, 1602.416046, 0.000000, X, Y) && !ellipse(31789.482941, 36584.864105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.728000, 31085.630000, 1390.384040, 1390.384040, 0.000000, X, Y) && !ellipse(36974.684000, 25573.924600, 1739.712050, 1739.712050, 0.000000, X, Y) && !ellipse(36575.183868, 25517.592194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37749.598907, 23897.381805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25122.768097, 36227.544952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32202.550000, 29601.646800, 1496.048043, 1496.048043, 0.000000, X, Y) && !ellipse(38381.615600, 34152.940800, 483.237614, 483.237614, 0.000000, X, Y) && !ellipse(32747.097020, 24699.610200, 269.392008, 269.392008, 0.000000, X, Y) && !ellipse(39906.605200, 24991.732200, 479.468814, 479.468814, 0.000000, X, Y) && !ellipse(30269.386600, 27884.833600, 700.644820, 700.644820, 0.000000, X, Y) && !ellipse(28495.921400, 31599.169400, 986.992028, 986.992028, 0.000000, X, Y) && !ellipse(28620.578033, 30212.509705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30572.464360, 23441.673400, 477.344814, 477.344814, 0.000000, X, Y) && !ellipse(39879.203217, 27323.134247, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 08:40:25 2012] Writing fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src33.gif
[Tue Jul 17 09:08:55 2012] Mean detx,y = (-5729.44, 2928.29) 
[Tue Jul 17 09:08:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 09:10:33 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 09:10:33 2012] Setting source spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jul 17 09:10:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Jul 17 11:18:38 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:39 2012] Error reading totcts from fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Jul 17 11:18:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:41 2012] Using photon index=1.80, rate=0.0164, arf fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src33.arf
[Tue Jul 17 11:18:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:41 2012] Updating source flux to 1.9e-13
[Tue Jul 17 11:26:50 2012] Flag b found in src. 33 procflags, skipping spectral fitting
[Tue Jul 17 11:26:50 2012] Flag c found in src. 33 procflags, skipping spectral fitting