[Sun Jul 15 18:56:18 2012] Detection parameters:
  Position = (197.1, 463.4) = 18 4 37.88 -21 27 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.8 +/- 21.1
  Background counts = 38.4
  Rate = 0.006 +/- 0.0007

[Sun Jul 15 18:56:19 2012] Off-axis axis estimate = 14.04'
[Mon Jul 16 06:27:56 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 06:27:56 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Mon Jul 16 06:27:56 2012] source mask rpix=3.1, npix_max = 51, mask sum = 42, frac = 0.814
[Mon Jul 16 06:27:56 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 13.45"
[Mon Jul 16 08:58:07 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src12.ximg exists
[Mon Jul 16 08:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src12.csv
[Mon Jul 16 08:58:07 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src12_1.ximg exists
[Mon Jul 16 08:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src12.csv
[Mon Jul 16 08:58:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:08 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Mon Jul 16 08:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon Jul 16 08:58:08 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Mon Jul 16 08:58:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Mon Jul 16 08:58:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:53 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.494233 pixels away
[Mon Jul 16 08:58:53 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:53 2012] Assessing source extent using major
[Mon Jul 16 08:58:53 2012] Source does appear to be extended
[Mon Jul 16 08:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:53 2012] Source is confused with source 2
[Mon Jul 16 23:27:05 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 23:27:05 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Mon Jul 16 23:27:05 2012] source mask rpix=3.1, npix_max = 51, mask sum = 42, frac = 0.814
[Mon Jul 16 23:27:05 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 13.45"
[Tue Jul 17 03:16:03 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src12.ximg exists
[Tue Jul 17 03:16:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src12.csv
[Tue Jul 17 03:16:03 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Jul 17 03:16:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src12.csv
[Tue Jul 17 03:16:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:05 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Jul 17 03:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Jul 17 03:16:05 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Jul 17 03:16:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Tue Jul 17 03:16:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:54 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 17.877293 pixels away
[Tue Jul 17 03:16:54 2012] Spatial fit model total counts = 2674.740000, observed total counts = 2736.000000
[Tue Jul 17 03:16:54 2012] Offset between fit and detection position for source 20 = 2.955952 pixels
[Tue Jul 17 03:16:54 2012] Warning, changing simple spatial fit ID from 12 to 15
[Tue Jul 17 03:16:54 2012] 1580.108000 total counts/ 305.938000 bgd. counts: snr = 72.846831
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.955952 pixels
  Position = (198.4, 460.7) = 18 4 37.49 -21 27 45.7
  Extent = 29.7 (29.7-29.7)", rotation angle = 0
  Source counts = 1274.2 +/- 39.8
  Background counts = 305.9
  Rate = 0.04 +/- 0.001
[Tue Jul 17 03:16:54 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:54 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:54 2012] Source does appear to be extended
[Tue Jul 17 03:16:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 08:40:24 2012] Counts = 1274.170000, rescaling region sizes by 2.000000
[Tue Jul 17 08:40:24 2012] XMMSAS src. selection expression = ellipse(17209.150000, 40034.824000, 3562.092102, 3562.092102, 0.000000, X, Y)
[Tue Jul 17 08:40:24 2012] Writing source region out to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src20_src.reg
[Tue Jul 17 08:40:24 2012] Extracting stamp from image fullrun_mos2_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (0, 256) - (403, 595)
[Tue Jul 17 08:40:24 2012] XMMSAS bgd. selection expression = annulus(17209.150000, 40034.824000, 11873.640342, 23747.280683, X, Y) && !ellipse(37766.870720, 26902.874600, 1187.272034, 254.402407, 9.110606, X, Y) && !ellipse(27416.005000, 21910.648400, 353.736010, 353.736010, 0.000000, X, Y) && !ellipse(18572.648865, 25175.499634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22633.835400, 33650.474000, 774.508022, 774.508022, 0.000000, X, Y) && !ellipse(40106.257400, 26720.054400, 1970.160057, 246.269607, 1.285800, X, Y) && !ellipse(41015.733964, 26741.046600, 525.660015, 525.660015, 0.000000, X, Y) && !ellipse(31955.515198, 28321.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17786.262000, 39141.906000, 1964.736057, 1964.736057, 0.000000, X, Y) && !ellipse(41417.568400, 26743.791720, 671.534419, 671.534419, 0.000000, X, Y) && !ellipse(30043.299377, 28804.558289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18063.206000, 38847.552000, 1868.592054, 1868.592054, 0.000000, X, Y) && !ellipse(40575.566600, 26722.496200, 293.973608, 293.973608, 0.000000, X, Y) && !ellipse(28752.060000, 29655.480800, 1345.784039, 1345.784039, 0.000000, X, Y) && !ellipse(18553.422000, 38120.232000, 2190.040063, 2190.040063, 0.000000, X, Y) && !ellipse(37910.106049, 35598.499481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31742.270400, 28475.316800, 1504.272043, 1504.272043, 0.000000, X, Y) && !ellipse(19053.072000, 37311.868000, 1873.640054, 1873.640054, 0.000000, X, Y) && !ellipse(18116.346000, 38560.916000, 1779.544051, 1779.544051, 0.000000, X, Y) && !ellipse(38857.991800, 25116.004600, 467.489613, 467.489613, 0.000000, X, Y) && !ellipse(17568.864000, 39513.118000, 1533.944044, 1533.944044, 0.000000, X, Y) && !ellipse(25721.604000, 31516.514600, 2494.080072, 2494.080072, 0.000000, X, Y) && !ellipse(28293.944000, 29874.322000, 1367.080039, 1367.080039, 0.000000, X, Y) && !ellipse(26047.846000, 31082.973360, 339.660810, 339.660810, 0.000000, X, Y) && !ellipse(35933.861542, 39256.628052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39428.012848, 25095.755829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37735.301575, 27484.429932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32972.414000, 31057.412000, 1602.416046, 1602.416046, 0.000000, X, Y) && !ellipse(20476.956680, 35708.855774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31789.482941, 36584.864105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26088.728000, 31085.630000, 1390.384040, 1390.384040, 0.000000, X, Y) && !ellipse(36974.684000, 25573.924600, 1739.712050, 1739.712050, 0.000000, X, Y) && !ellipse(36575.183868, 25517.592194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37749.598907, 23897.381805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21667.088200, 22356.291400, 423.027212, 423.027212, 0.000000, X, Y) && !ellipse(25122.768097, 36227.544952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32202.550000, 29601.646800, 1496.048043, 1496.048043, 0.000000, X, Y) && !ellipse(33166.644000, 30474.248000, 2992.096086, 2992.096086, 0.000000, X, Y) && !ellipse(38381.615600, 34152.940800, 483.237614, 483.237614, 0.000000, X, Y) && !ellipse(32747.097020, 24699.610200, 269.392008, 269.392008, 0.000000, X, Y) && !ellipse(19903.062000, 40852.766000, 2113.904061, 2113.904061, 0.000000, X, Y) && !ellipse(21405.567780, 38848.316406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39906.605200, 24991.732200, 479.468814, 479.468814, 0.000000, X, Y) && !ellipse(41221.132400, 24905.821100, 328.219209, 328.219209, 0.000000, X, Y) && !ellipse(30269.386600, 27884.833600, 700.644820, 700.644820, 0.000000, X, Y) && !ellipse(21659.159000, 38534.506206, 1446.432042, 719.918421, 35.644900, X, Y) && !ellipse(28495.921400, 31599.169400, 986.992028, 986.992028, 0.000000, X, Y) && !ellipse(17514.049800, 21555.453400, 452.117676, 452.117676, 0.000000, X, Y) && !ellipse(28620.578033, 30212.509705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30572.464360, 23441.673400, 477.344814, 477.344814, 0.000000, X, Y) && !ellipse(20946.980000, 39094.072000, 1941.680056, 1941.680056, 0.000000, X, Y) && !ellipse(39879.203217, 27323.134247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15965.489746, 22536.931519, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 08:40:24 2012] Writing fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src20.gif
[Tue Jul 17 08:48:38 2012] Mean detx,y = (9194.05, 11618.11) 
[Tue Jul 17 08:48:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 08:53:10 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 08:53:10 2012] Setting source spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Jul 17 08:53:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Jul 17 11:18:37 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:37 2012] Error reading totcts from fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Jul 17 11:18:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:40 2012] Using photon index=1.80, rate=0.0403, arf fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src20.arf
[Tue Jul 17 11:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:40 2012] Updating source flux to 1.3e-12
[Tue Jul 17 11:26:50 2012] Flag c found in src. 20 procflags, skipping spectral fitting