[Sun Jul 15 18:56:18 2012] Detection parameters:
  Position = (477.3, 307.9) = 18 3 10.52 -21 38 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.4 +/- 19.8
  Background counts = 25.6
  Rate = 0.006 +/- 0.0006

[Sun Jul 15 18:56:19 2012] Off-axis axis estimate = 12.98'
[Mon Jul 16 06:27:56 2012] Using EEF radius (= 12.92 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 06:27:56 2012] Initial guess for spatial extent in simple fitting = 12.92"
[Mon Jul 16 06:27:56 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.017
[Mon Jul 16 06:27:56 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.92"
[Mon Jul 16 08:58:07 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jul 16 08:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src13.csv
[Mon Jul 16 08:58:07 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jul 16 08:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src13.csv
[Mon Jul 16 08:58:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:08 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jul 16 08:58:08 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jul 16 08:58:08 2012] Fit fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Jul 16 08:58:53 2012] Spatial fit model total counts = 897.307000, observed total counts = 899.000000
[Mon Jul 16 08:58:53 2012] Offset between fit and detection position for source 14 = 0.338384 pixels
[Mon Jul 16 08:58:53 2012] 404.561600 total counts/ 334.267000 bgd. counts: snr = 3.844813
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.338384 pixels
  Position = (477.1, 307.6) = 18 3 10.57 -21 38 51.4
  Extent = 4.2 (3.2-6.0)", rotation angle = 0
  Source counts = 70.3 +/- 20.1
  Background counts = 334.3
  Rate = 0.002 +/- 0.0006
[Mon Jul 16 08:58:53 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:53 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 08:58:53 2012] Source does appear to be extended
[Mon Jul 16 08:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:53 2012] Source is confused with source 11
[Mon Jul 16 23:27:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 23:27:05 2012] Initial guess for spatial extent in simple fitting = 4.20"
[Mon Jul 16 23:27:05 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.047
[Mon Jul 16 23:27:05 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 4.20"
[Tue Jul 17 03:16:03 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src13.ximg exists
[Tue Jul 17 03:16:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src13.csv
[Tue Jul 17 03:16:03 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src13_1.ximg exists
[Tue Jul 17 03:16:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src13.csv
[Tue Jul 17 03:16:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:05 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Tue Jul 17 03:16:05 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Tue Jul 17 03:16:05 2012] Fit fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Tue Jul 17 03:16:54 2012] Spatial fit model total counts = 755.993000, observed total counts = 756.000000
[Tue Jul 17 03:16:54 2012] Offset between fit and detection position for source 14 = 0.590791 pixels
[Tue Jul 17 03:16:54 2012] 450.437000 total counts/ 293.094000 bgd. counts: snr = 9.190602
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.590791 pixels
  Position = (476.6, 308.0) = 18 3 10.72 -21 38 49.8
  Extent = 8.4 (8.4-8.4)", rotation angle = 0
  Source counts = 157.3 +/- 21.2
  Background counts = 293.1
  Rate = 0.005 +/- 0.0007
[Tue Jul 17 03:16:54 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:54 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:54 2012] Source does appear to be extended
[Tue Jul 17 03:16:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 08:40:24 2012] XMMSAS src. selection expression = ellipse(41417.568400, 26743.791720, 503.650814, 503.650814, 0.000000, X, Y)
[Tue Jul 17 08:40:24 2012] Writing source region out to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src14_src.reg
[Tue Jul 17 08:40:24 2012] Extracting stamp from image fullrun_mos2_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (448, 279) - (506, 337)
[Tue Jul 17 08:40:24 2012] XMMSAS bgd. selection expression = annulus(41417.568400, 26743.791720, 839.418024, 1678.836048, X, Y) && !ellipse(41920.181460, 26759.741200, 650.351219, 650.351219, 0.000000, X, Y) && !ellipse(40106.257400, 26720.054400, 1970.160057, 246.269607, 1.285800, X, Y) && !ellipse(41015.733964, 26741.046600, 525.660015, 525.660015, 0.000000, X, Y) && !ellipse(40575.566600, 26722.496200, 293.973608, 293.973608, 0.000000, X, Y) && !ellipse(39428.012848, 25095.755829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43352.451477, 25217.234039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39906.605200, 24991.732200, 479.468814, 479.468814, 0.000000, X, Y) && !ellipse(41221.132400, 24905.821100, 328.219209, 328.219209, 0.000000, X, Y) && !ellipse(39879.203217, 27323.134247, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 08:40:24 2012] Writing fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src14.gif
[Tue Jul 17 08:53:13 2012] Mean detx,y = (-14287.63, -492.58) 
[Tue Jul 17 08:53:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 08:53:23 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 08:53:23 2012] Setting source spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jul 17 08:53:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jul 17 11:18:37 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:37 2012] Error reading totcts from fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jul 17 11:18:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:40 2012] Using photon index=1.80, rate=0.00498, arf fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src14.arf
[Tue Jul 17 11:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:40 2012] Updating source flux to 1.2e-13
[Tue Jul 17 11:26:50 2012] Flag c found in src. 14 procflags, skipping spectral fitting