[Sun Jul 15 18:56:18 2012] Detection parameters:
  Position = (482.8, 308.0) = 18 3 8.78 -21 38 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.9 +/- 22.4
  Background counts = 24.8
  Rate = 0.007 +/- 0.0007

[Sun Jul 15 18:56:19 2012] Off-axis axis estimate = 13.39'
[Mon Jul 16 06:27:56 2012] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 06:27:56 2012] Initial guess for spatial extent in simple fitting = 13.12"
[Mon Jul 16 06:27:56 2012] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.132
[Mon Jul 16 06:27:56 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.12"
[Mon Jul 16 08:58:07 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jul 16 08:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src5.csv
[Mon Jul 16 08:58:07 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jul 16 08:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src5.csv
[Mon Jul 16 08:58:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:08 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jul 16 08:58:08 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jul 16 08:58:08 2012] Fit fullrun_mos2_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jul 16 08:58:53 2012] Warning, spatial fit 5 centroid is now closest to src. 17
[Mon Jul 16 08:58:53 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:53 2012] Assessing source extent using major
[Mon Jul 16 08:58:53 2012] Source does appear to be extended
[Mon Jul 16 08:58:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:53 2012] Source is confused with source 14
[Mon Jul 16 23:27:05 2012] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 23:27:05 2012] Initial guess for spatial extent in simple fitting = 13.12"
[Mon Jul 16 23:27:05 2012] source mask rpix=3.0, npix_max = 49, mask sum = 56, frac = 1.132
[Mon Jul 16 23:27:05 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 13.12"
[Tue Jul 17 03:16:03 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src5.ximg exists
[Tue Jul 17 03:16:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src5.csv
[Tue Jul 17 03:16:03 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Jul 17 03:16:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src5.csv
[Tue Jul 17 03:16:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:04 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Jul 17 03:16:04 2012] fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jul 17 03:16:04 2012] Fit fullrun_mos2_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Jul 17 03:16:54 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.989856 pixels away
[Tue Jul 17 03:16:54 2012] Spatial fit model total counts = 804.955000, observed total counts = 804.000000
[Tue Jul 17 03:16:54 2012] Offset between fit and detection position for source 11 = 0.445305 pixels
[Tue Jul 17 03:16:54 2012] 699.167000 total counts/ 485.127000 bgd. counts: snr = 9.717783
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.445305 pixels
  Position = (482.4, 308.1) = 18 3 8.91 -21 38 49.0
  Extent = 8.1 (7.0-9.5)", rotation angle = 0
  Source counts = 214.0 +/- 26.4
  Background counts = 485.1
  Rate = 0.007 +/- 0.0008
[Tue Jul 17 03:16:54 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:54 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:54 2012] Source does appear to be extended
[Tue Jul 17 03:16:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 08:40:24 2012] XMMSAS src. selection expression = ellipse(41920.181460, 26759.741200, 487.763414, 487.763414, 0.000000, X, Y)
[Tue Jul 17 08:40:24 2012] Writing source region out to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src11_src.reg
[Tue Jul 17 08:40:24 2012] Extracting stamp from image fullrun_mos2_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (454, 280) - (510, 336)
[Tue Jul 17 08:40:24 2012] XMMSAS bgd. selection expression = annulus(41920.181460, 26759.741200, 812.939023, 1625.878047, X, Y) && !ellipse(44040.794373, 26847.427338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43783.074000, 24897.103800, 589.528817, 589.528817, 0.000000, X, Y) && !ellipse(40106.257400, 26720.054400, 1970.160057, 246.269607, 1.285800, X, Y) && !ellipse(41015.733964, 26741.046600, 525.660015, 525.660015, 0.000000, X, Y) && !ellipse(41417.568400, 26743.791720, 671.534419, 671.534419, 0.000000, X, Y) && !ellipse(40575.566600, 26722.496200, 293.973608, 293.973608, 0.000000, X, Y) && !ellipse(39428.012848, 25095.755829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43352.451477, 25217.234039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39906.605200, 24991.732200, 479.468814, 479.468814, 0.000000, X, Y) && !ellipse(41221.132400, 24905.821100, 328.219209, 328.219209, 0.000000, X, Y) && !ellipse(39879.203217, 27323.134247, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 17 08:40:24 2012] Writing fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src11.gif
[Tue Jul 17 08:41:32 2012] Mean detx,y = (-14734.93, -459.99) 
[Tue Jul 17 08:41:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 08:41:42 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 08:41:42 2012] Setting source spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jul 17 08:41:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jul 17 11:18:37 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:37 2012] Error reading totcts from fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jul 17 11:18:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:40 2012] Using photon index=1.80, rate=0.00677, arf fullrun_mos2_xmm0503170201_pi300-10000_pass1_cl_src11.arf
[Tue Jul 17 11:18:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:40 2012] Updating source flux to 1.7e-13
[Tue Jul 17 11:26:50 2012] Flag c found in src. 11 procflags, skipping spectral fitting