[Sun Jul 15 18:55:45 2012] Detection parameters:
  Position = (451.1, 288.1) = 18 3 18.66 -21 40 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.0 +/- 13.4
  Background counts = 26.5
  Rate = 0.004 +/- 0.0008

[Sun Jul 15 18:55:45 2012] Off-axis axis estimate = 11.09'
[Mon Jul 16 02:33:17 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 02:33:17 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Mon Jul 16 02:33:17 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.850
[Mon Jul 16 02:33:17 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 11.98"
[Mon Jul 16 06:27:54 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src39.ximg exists
[Mon Jul 16 06:27:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src39.csv
[Mon Jul 16 06:27:54 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Jul 16 06:27:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src39.csv
[Mon Jul 16 06:27:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 06:27:55 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Jul 16 06:27:56 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Jul 16 06:27:56 2012] Fit fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Jul 16 08:58:43 2012] Warning, spatial fit 39 centroid is now closest to src. 53
[Mon Jul 16 08:58:43 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:43 2012] Assessing source extent using major
[Mon Jul 16 08:58:43 2012] Source does appear to be extended
[Mon Jul 16 08:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:43 2012] Source is confused with source 57
[Mon Jul 16 19:18:51 2012] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 19:18:51 2012] Initial guess for spatial extent in simple fitting = 11.98"
[Mon Jul 16 19:18:51 2012] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.850
[Mon Jul 16 19:18:51 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 11.98"
[Mon Jul 16 23:27:03 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src37.ximg exists
[Mon Jul 16 23:27:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src37.csv
[Mon Jul 16 23:27:03 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Jul 16 23:27:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src37.csv
[Mon Jul 16 23:27:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 23:27:05 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Jul 16 23:27:05 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Jul 16 23:27:05 2012] Fit fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Tue Jul 17 03:16:42 2012] Warning, spatial fit 37 centroid is now closest to src. 59
[Tue Jul 17 03:16:42 2012] Spatial fit model total counts = 1287.180000, observed total counts = 1287.000000
[Tue Jul 17 03:16:42 2012] Offset between fit and detection position for source 54 = 6.280314 pixels
[Tue Jul 17 03:16:42 2012] Warning, changing simple spatial fit ID from 37 to 58
[Tue Jul 17 03:16:42 2012] 1272.613000 total counts/ 908.192000 bgd. counts: snr = 12.092457
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 6.280314 pixels
  Position = (456.7, 285.2) = 18 3 16.92 -21 40 28.8
  Extent = 26.0 (21.0-32.6)", rotation angle = 0
  Source counts = 364.4 +/- 35.7
  Background counts = 908.2
  Rate = 0.01 +/- 0.001
[Tue Jul 17 03:16:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:42 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:42 2012] Source does appear to be extended
[Tue Jul 17 03:16:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 07:07:28 2012] XMMSAS src. selection expression = ellipse(39684.026000, 24766.608000, 1559.088045, 1559.088045, 0.000000, X, Y)
[Tue Jul 17 07:07:28 2012] Writing source region out to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src54_src.reg
[Tue Jul 17 07:07:28 2012] Extracting stamp from image fullrun_mos1_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (367, 196) - (546, 375)
[Tue Jul 17 07:07:28 2012] XMMSAS bgd. selection expression = annulus(39684.026000, 24766.608000, 2598.480075, 5196.960150, X, Y) && !ellipse(40195.373600, 28985.570300, 715.234421, 715.234421, 0.000000, X, Y) && !ellipse(39646.150055, 28125.096466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37655.974609, 28311.522003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40596.676520, 28024.980200, 1054.632030, 1054.632030, 0.000000, X, Y) && !ellipse(40918.899414, 28913.661407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42381.857727, 28861.203339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41426.923340, 28894.369965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32900.208000, 30790.202000, 1590.280046, 1590.280046, 0.000000, X, Y) && !ellipse(43854.610443, 25090.368774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39734.850600, 24993.419400, 600.704017, 600.704017, 0.000000, X, Y) && !ellipse(43307.046940, 24960.138200, 1413.496041, 1413.496041, 0.000000, X, Y) && !ellipse(38007.367737, 24044.741241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42857.400800, 24984.363000, 567.133616, 567.133616, 0.000000, X, Y) && !ellipse(42825.130798, 28869.054260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36291.978800, 25216.690000, 557.023216, 557.023216, 0.000000, X, Y) && !ellipse(40327.272000, 25031.452000, 1625.528047, 276.376008, 0.631132, X, Y) && !ellipse(42876.460000, 24905.892000, 2144.528062, 2144.528062, 0.000000, X, Y) && !ellipse(40747.414000, 25236.227200, 1901.896055, 1901.896055, 0.000000, X, Y)
[Tue Jul 17 07:07:28 2012] Writing fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src54.gif
[Tue Jul 17 07:19:22 2012] Mean detx,y = (-2448.55, 12313.01) 
[Tue Jul 17 07:19:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 07:20:14 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 07:20:14 2012] Setting source spectrum file to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Jul 17 07:20:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Tue Jul 17 11:18:33 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:33 2012] Error reading totcts from fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Jul 17 11:18:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:35 2012] Using photon index=1.80, rate=0.0116, arf fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src54.arf
[Tue Jul 17 11:18:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:35 2012] Updating source flux to 1.8e-13
[Tue Jul 17 11:18:46 2012] Flag c found in src. 54 procflags, skipping spectral fitting