[Sun Jul 15 18:55:45 2012] Detection parameters:
  Position = (336.7, 356.5) = 18 3 54.37 -21 35 10.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.7 +/- 17.8
  Background counts = 30.4
  Rate = 0.006 +/- 0.0009

[Sun Jul 15 18:55:45 2012] Off-axis axis estimate = 5.04'
[Mon Jul 16 02:33:17 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 02:33:17 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Mon Jul 16 02:33:17 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.765
[Mon Jul 16 02:33:17 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.95"
[Mon Jul 16 06:27:54 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src22.ximg exists
[Mon Jul 16 06:27:54 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src22_1.ximg exists
[Mon Jul 16 06:27:54 2012] Fit fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src22 appears to have run properly
[Mon Jul 16 06:27:55 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Mon Jul 16 06:27:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon Jul 16 06:27:55 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Mon Jul 16 06:27:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src22.csv
[Mon Jul 16 06:27:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 08:58:43 2012] Source 41 is offset by 3.812546 and -3.893984 pixels which is larger than
2 X fitted extent = 8.229380 x 1.969435, not incorporating fit results
[Mon Jul 16 08:58:43 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:43 2012] Assessing source extent using major
[Mon Jul 16 08:58:43 2012] Source does appear to be extended
[Mon Jul 16 08:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 19:18:51 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 19:18:51 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Mon Jul 16 19:18:51 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.765
[Mon Jul 16 19:18:51 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 8.95"
[Mon Jul 16 23:27:03 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src21.ximg exists
[Mon Jul 16 23:27:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src21.csv
[Mon Jul 16 23:27:03 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Jul 16 23:27:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src21.csv
[Mon Jul 16 23:27:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 23:27:04 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Jul 16 23:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Jul 16 23:27:04 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Jul 16 23:27:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Jul 16 23:27:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:42 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 41 at 11.947593 pixels away
[Tue Jul 17 03:16:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:42 2012] Assessing source extent using major
[Tue Jul 17 03:16:42 2012] Source does appear to be extended
[Tue Jul 17 03:16:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 07:07:27 2012] XMMSAS src. selection expression = ellipse(29246.891479, 30965.765411, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 17 07:07:27 2012] Writing source region out to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src41_src.reg
[Tue Jul 17 07:07:27 2012] Extracting stamp from image fullrun_mos1_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (299, 319) - (374, 394)
[Tue Jul 17 07:07:27 2012] XMMSAS bgd. selection expression = annulus(29246.891479, 30965.765411, 1087.500000, 2175.000000, X, Y) && !ellipse(26886.656600, 33505.462400, 1526.632044, 894.528026, 25.475400, X, Y) && !ellipse(32900.208000, 30790.202000, 1590.280046, 1590.280046, 0.000000, X, Y) && !ellipse(31421.650000, 29950.018000, 1509.216043, 1509.216043, 0.000000, X, Y) && !ellipse(28228.658539, 31755.772034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29354.658000, 32047.953000, 1184.904034, 1184.904034, 0.000000, X, Y) && !ellipse(29077.359894, 32132.722473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30013.971000, 28738.969620, 465.098413, 465.098413, 0.000000, X, Y) && !ellipse(30142.486160, 31859.692000, 790.328823, 790.328823, 0.000000, X, Y)
[Tue Jul 17 07:07:27 2012] Writing fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src41.gif
[Tue Jul 17 07:14:01 2012] Mean detx,y = (3725.65, 1754.43) 
[Tue Jul 17 07:14:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 07:14:12 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 07:14:12 2012] Setting source spectrum file to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Jul 17 07:14:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Tue Jul 17 07:55:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 17 07:55:49 2012] rmf not generated due to insufficient counts
[Tue Jul 17 11:18:31 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:31 2012] Error reading totcts from fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Jul 17 11:18:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:35 2012] Using photon index=1.80, rate=0.00628, arf fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src41.arf
[Tue Jul 17 11:18:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:35 2012] Updating source flux to 7.1e-14
[Tue Jul 17 11:18:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting