[Sun Jul 15 18:55:45 2012] Detection parameters:
  Position = (334.8, 369.9) = 18 3 54.98 -21 34 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.8 +/- 18.0
  Background counts = 28.4
  Rate = 0.006 +/- 0.0007

[Sun Jul 15 18:55:45 2012] Off-axis axis estimate = 5.81'
[Mon Jul 16 02:33:17 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 02:33:17 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Mon Jul 16 02:33:17 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.071
[Mon Jul 16 02:33:17 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 9.33"
[Mon Jul 16 06:27:54 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src30.ximg exists
[Mon Jul 16 06:27:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src30.csv
[Mon Jul 16 06:27:54 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src30_1.ximg exists
[Mon Jul 16 06:27:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src30.csv
[Mon Jul 16 06:27:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 06:27:55 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Mon Jul 16 06:27:55 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Mon Jul 16 06:27:55 2012] Fit fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Mon Jul 16 08:58:43 2012] Spatial fit model total counts = 749.244000, observed total counts = 673.000000
[Mon Jul 16 08:58:43 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 16 08:58:43 2012] Warning, spatial fit 30 centroid is now closest to src. 39
[Mon Jul 16 08:58:43 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:43 2012] Assessing source extent using major
[Mon Jul 16 08:58:43 2012] Source does appear to be extended
[Mon Jul 16 08:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:43 2012] Source is confused with source 39
[Mon Jul 16 19:18:51 2012] Using EEF radius (= 9.33 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 19:18:51 2012] Initial guess for spatial extent in simple fitting = 9.33"
[Mon Jul 16 19:18:51 2012] source mask rpix=2.1, npix_max = 28, mask sum = 30, frac = 1.071
[Mon Jul 16 19:18:51 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 9.33"
[Mon Jul 16 23:27:03 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src29.ximg exists
[Mon Jul 16 23:27:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src29.csv
[Mon Jul 16 23:27:03 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon Jul 16 23:27:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src29.csv
[Mon Jul 16 23:27:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 23:27:05 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon Jul 16 23:27:05 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Jul 16 23:27:05 2012] Fit fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Tue Jul 17 03:16:42 2012] Spatial fit model total counts = 370.132000, observed total counts = 419.000000
[Tue Jul 17 03:16:42 2012] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 03:16:42 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 37 at 20.437737 pixels away
[Tue Jul 17 03:16:42 2012] Warning, spatial fit 29 centroid is now closest to src. 39
[Tue Jul 17 03:16:42 2012] Source 37 is offset by -3.135771 and -6.185121 pixels which is larger than
2 X fitted extent = 1.135531 x 1.135531, not incorporating fit results
[Tue Jul 17 03:16:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:42 2012] Assessing source extent using major
[Tue Jul 17 03:16:42 2012] Source does appear to be extended
[Tue Jul 17 03:16:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 07:07:28 2012] XMMSAS src. selection expression = ellipse(29077.359894, 32132.722473, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jul 17 07:07:28 2012] Writing source region out to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src37_src.reg
[Tue Jul 17 07:07:28 2012] Extracting stamp from image fullrun_mos1_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (297, 332) - (372, 407)
[Tue Jul 17 07:07:28 2012] XMMSAS bgd. selection expression = annulus(29077.359894, 32132.722473, 1087.500000, 2175.000000, X, Y) && !ellipse(26886.656600, 33505.462400, 1526.632044, 894.528026, 25.475400, X, Y) && !ellipse(29246.891479, 30965.765411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31421.650000, 29950.018000, 1509.216043, 1509.216043, 0.000000, X, Y) && !ellipse(28228.658539, 31755.772034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29354.658000, 32047.953000, 1184.904034, 1184.904034, 0.000000, X, Y) && !ellipse(30142.486160, 31859.692000, 790.328823, 790.328823, 0.000000, X, Y)
[Tue Jul 17 07:07:28 2012] Writing fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src37.gif
[Tue Jul 17 07:17:09 2012] Mean detx,y = (4828.44, 1838.87) 
[Tue Jul 17 07:17:10 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 07:17:23 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 07:17:23 2012] Setting source spectrum file to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jul 17 07:17:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Jul 17 08:06:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jul 17 08:06:59 2012] rmf not generated due to insufficient counts
[Tue Jul 17 11:18:32 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:32 2012] Error reading totcts from fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jul 17 11:18:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:35 2012] Using photon index=1.80, rate=0.00554, arf fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src37.arf
[Tue Jul 17 11:18:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:35 2012] Updating source flux to 6.4e-14
[Tue Jul 17 11:18:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting