[Sun Jul 15 18:55:44 2012] Detection parameters:
  Position = (499.2, 288.7) = 18 3 3.66 -21 40 14.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.7 +/- 17.0
  Background counts = 20.4
  Rate = 0.005 +/- 0.0005

[Sun Jul 15 18:55:45 2012] Off-axis axis estimate = 14.57'
[Mon Jul 16 02:33:17 2012] Using EEF radius (= 13.71 ")to estimate initial spatial extent for simple fitting
[Mon Jul 16 02:33:17 2012] Initial guess for spatial extent in simple fitting = 13.71"
[Mon Jul 16 02:33:17 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.918
[Mon Jul 16 02:33:17 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 13.71"
[Mon Jul 16 06:27:54 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src37.ximg exists
[Mon Jul 16 06:27:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src37.csv
[Mon Jul 16 06:27:54 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src37_1.ximg exists
[Mon Jul 16 06:27:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src37.csv
[Mon Jul 16 06:27:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 06:27:55 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Mon Jul 16 06:27:55 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Jul 16 06:27:55 2012] Fit fullrun_mos1_xmm0503170201_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Mon Jul 16 08:58:43 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 13.123073 pixels away
[Mon Jul 16 08:58:43 2012] Spatial fit model total counts = 709.621000, observed total counts = 703.000000
[Mon Jul 16 08:58:43 2012] Offset between fit and detection position for source 20 = 1.504323 pixels
[Mon Jul 16 08:58:43 2012] 470.020000 total counts/ 216.248000 bgd. counts: snr = 17.257094
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.504323 pixels
  Position = (498.3, 287.5) = 18 3 3.93 -21 40 18.8
  Extent = 17.7 (17.7-17.7)", rotation angle = 0
  Source counts = 253.8 +/- 21.7
  Background counts = 216.2
  Rate = 0.008 +/- 0.0007
[Mon Jul 16 08:58:43 2012] Vigneting correction estimate = 1.000000
[Mon Jul 16 08:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 16 08:58:43 2012] Assessing source extent using major axis lower bound
[Mon Jul 16 08:58:43 2012] Source does appear to be extended
[Mon Jul 16 08:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 16 08:58:43 2012] Source is confused with source 19
[Mon Jul 16 19:18:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 16 19:18:51 2012] Initial guess for spatial extent in simple fitting = 17.67"
[Mon Jul 16 19:18:51 2012] source mask rpix=4.1, npix_max = 83, mask sum = 81, frac = 0.973
[Mon Jul 16 19:18:51 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 17.67"
[Mon Jul 16 23:27:03 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src35.ximg exists
[Mon Jul 16 23:27:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src35.csv
[Mon Jul 16 23:27:03 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src35_1.ximg exists
[Mon Jul 16 23:27:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src35.csv
[Mon Jul 16 23:27:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 16 23:27:05 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Mon Jul 16 23:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src35.csv
[Mon Jul 16 23:27:05 2012] fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Mon Jul 16 23:27:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src35.csv
[Mon Jul 16 23:27:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170201_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 17 03:16:42 2012] Spatial fit model total counts = 1004.770000, observed total counts = 903.000000
[Tue Jul 17 03:16:42 2012] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 17 03:16:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 17 03:16:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 17 03:16:42 2012] Assessing source extent using major axis lower bound
[Tue Jul 17 03:16:42 2012] Source does appear to be extended
[Tue Jul 17 03:16:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 17 07:07:28 2012] XMMSAS src. selection expression = ellipse(43307.046940, 24960.138200, 1060.122031, 1060.122031, 0.000000, X, Y)
[Tue Jul 17 07:07:28 2012] Writing source region out to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src20_src.reg
[Tue Jul 17 07:07:28 2012] Extracting stamp from image fullrun_mos1_xmm0503170201_pi300-10000_cl_sm2.00.img.gz, (437, 227) - (559, 348)
[Tue Jul 17 07:07:28 2012] XMMSAS bgd. selection expression = annulus(43307.046940, 24960.138200, 1766.870051, 3533.740102, X, Y) && !ellipse(40195.373600, 28985.570300, 715.234421, 715.234421, 0.000000, X, Y) && !ellipse(39646.150055, 28125.096466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40596.676520, 28024.980200, 1054.632030, 1054.632030, 0.000000, X, Y) && !ellipse(40918.899414, 28913.661407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42381.857727, 28861.203339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41426.923340, 28894.369965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43854.610443, 25090.368774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39734.850600, 24993.419400, 600.704017, 600.704017, 0.000000, X, Y) && !ellipse(39684.026000, 24766.608000, 2078.784060, 2078.784060, 0.000000, X, Y) && !ellipse(42857.400800, 24984.363000, 567.133616, 567.133616, 0.000000, X, Y) && !ellipse(42825.130798, 28869.054260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40327.272000, 25031.452000, 1625.528047, 276.376008, 0.631132, X, Y) && !ellipse(42876.460000, 24905.892000, 2144.528062, 2144.528062, 0.000000, X, Y) && !ellipse(40747.414000, 25236.227200, 1901.896055, 1901.896055, 0.000000, X, Y)
[Tue Jul 17 07:07:28 2012] Writing fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src20.gif
[Tue Jul 17 07:18:25 2012] Mean detx,y = (-2194.05, 16000.28) 
[Tue Jul 17 07:18:26 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 17 07:18:58 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 17 07:18:58 2012] Setting source spectrum file to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Jul 17 07:18:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Jul 17 11:18:32 2012] Updating aperture counts using extracted products
[Tue Jul 17 11:18:32 2012] Error reading totcts from fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Jul 17 11:18:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 17 11:18:35 2012] Using photon index=1.80, rate=0.00808, arf fullrun_mos1_xmm0503170201_pi300-10000_pass1_cl_src20.arf
[Tue Jul 17 11:18:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 17 11:18:35 2012] Updating source flux to 1.9e-13
[Tue Jul 17 11:18:46 2012] Flag p found in src. 20 procflags, skipping spectral fitting
[Tue Jul 17 11:18:46 2012] Flag c found in src. 20 procflags, skipping spectral fitting