[Sun Feb 19 14:17:12 2012] Detection parameters:
  Position = (343.0, 354.2) = 18 3 52.49 -21 35 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.0 +/- 21.8
  Background counts = 92.3
  Rate = 0.008 +/- 0.0008

[Sun Feb 19 14:17:17 2012] Off-axis axis estimate = 5.18'
[Sun Feb 19 14:22:50 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 14:22:50 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Sun Feb 19 14:22:50 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.944
[Sun Feb 19 14:22:50 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 9.02"
[Mon Feb 20 01:36:11 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src72.ximg exists
[Mon Feb 20 01:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src72.csv
[Mon Feb 20 01:36:11 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src72_1.ximg exists
[Mon Feb 20 01:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src72.csv
[Mon Feb 20 01:36:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 01:36:14 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Mon Feb 20 01:36:14 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Mon Feb 20 01:36:14 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Mon Feb 20 07:59:05 2012] Source 72 is offset by -8.293650 and -2.670594 pixels which is larger than
2 X fitted extent = 2.350478 x 2.350478, not incorporating fit results
[Mon Feb 20 07:59:06 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:06 2012] Assessing source extent using major
[Mon Feb 20 07:59:06 2012] Source does appear to be extended
[Mon Feb 20 07:59:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:06 2012] Source is confused with source 66
[Mon Feb 20 07:59:47 2012] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 07:59:47 2012] Initial guess for spatial extent in simple fitting = 9.02"
[Mon Feb 20 07:59:47 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.944
[Mon Feb 20 07:59:47 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 9.02"
[Tue Feb 21 00:15:57 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src70.ximg exists
[Tue Feb 21 00:15:57 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src70_1.ximg exists
[Tue Feb 21 00:15:57 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src70 appears to have run properly
[Tue Feb 21 00:16:00 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Tue Feb 21 00:16:00 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Tue Feb 21 00:16:00 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Tue Feb 21 07:33:38 2012] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 18.753057 pixels away
[Tue Feb 21 07:33:38 2012] Source 72 is offset by -1.635673 and -8.403465 pixels which is larger than
2 X fitted extent = 1.116791 x 5.092184, not incorporating fit results
[Tue Feb 21 07:33:38 2012] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 10.872185 pixels away
[Tue Feb 21 07:33:38 2012] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 12.974765 pixels away
[Tue Feb 21 07:33:38 2012] Source 72 is offset by -7.127121 and -5.886660 pixels which is larger than
2 X fitted extent = 1.164708 x 5.638483, not incorporating fit results
[Tue Feb 21 07:33:38 2012] Warning: source 73 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 12.975750 pixels away
[Tue Feb 21 07:33:38 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:38 2012] Assessing source extent using major
[Tue Feb 21 07:33:38 2012] Source does appear to be extended
[Tue Feb 21 07:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:34:23 2012] XMMSAS src. selection expression = ellipse(29792.242462, 30768.236542, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 07:34:23 2012] Writing source region out to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src72_src.reg
[Tue Feb 21 07:34:23 2012] Extracting stamp from image fullrun_pn_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (305, 317) - (380, 392)
[Tue Feb 21 07:34:23 2012] XMMSAS bgd. selection expression = annulus(29792.242462, 30768.236542, 1087.500000, 2175.000000, X, Y) && !ellipse(26081.523628, 34020.482565, 1571.072045, 373.644880, 39.777728, X, Y) && !ellipse(27098.971800, 33293.551200, 811.824023, 811.824023, 0.000000, X, Y) && !ellipse(26477.017800, 32748.934400, 1489.824043, 221.476806, 37.509000, X, Y) && !ellipse(28026.437600, 32671.200800, 630.816018, 630.816018, 0.000000, X, Y) && !ellipse(28859.025800, 32157.494400, 1487.976043, 352.960810, 30.992300, X, Y) && !ellipse(27368.046000, 32187.232072, 1281.912037, 323.382081, 90.000000, X, Y) && !ellipse(29310.237000, 31896.819160, 1549.896045, 385.447211, 32.757000, X, Y) && !ellipse(28066.114000, 31628.071940, 991.992029, 991.992029, 0.000000, X, Y) && !ellipse(30593.063400, 31193.546600, 640.954418, 640.954418, 0.000000, X, Y) && !ellipse(29158.997800, 31074.947400, 518.920015, 518.920015, 0.000000, X, Y) && !ellipse(31261.142000, 30877.543200, 1510.176043, 1510.176043, 0.000000, X, Y) && !ellipse(31620.320000, 30735.820400, 1004.984029, 1004.984029, 0.000000, X, Y) && !ellipse(32387.161896, 30388.891266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30954.812171, 30207.419067, 1470.896042, 211.990919, 23.308135, X, Y) && !ellipse(31719.107600, 29871.341800, 1470.896042, 256.268807, 23.910000, X, Y) && !ellipse(32304.362152, 29623.379944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32645.220000, 29226.036200, 1560.648045, 1560.648045, 0.000000, X, Y) && !ellipse(33269.838000, 29046.849400, 1588.800046, 1588.800046, 0.000000, X, Y) && !ellipse(29687.764060, 28907.578000, 1318.600038, 1318.600038, 0.000000, X, Y) && !ellipse(30500.893677, 28775.907867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32696.608000, 27744.286400, 1486.744043, 1486.744043, 0.000000, X, Y) && !ellipse(26857.195190, 30829.464172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28068.730194, 30052.931824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28945.431488, 29517.951385, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 07:34:23 2012] Writing fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src72.gif
[Tue Feb 21 09:35:46 2012] Mean detx,y = (2639.14, -3420.59) 
[Tue Feb 21 09:35:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 09:36:20 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 09:36:20 2012] Setting source spectrum file to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Tue Feb 21 09:36:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Tue Feb 21 14:33:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 21 14:33:12 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:06 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:06 2012] Error reading totcts from fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Tue Feb 21 20:29:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:12 2012] Using photon index=1.80, rate=0.0083, arf fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src72.arf
[Tue Feb 21 20:29:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:12 2012] Updating source flux to 2.7e-14
[Tue Feb 21 20:40:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting