[Sun Feb 19 14:17:11 2012] Detection parameters:
  Position = (365.3, 353.1) = 18 3 45.54 -21 35 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 300.0 +/- 26.6
  Background counts = 83.6
  Rate = 0.01 +/- 0.0009

[Sun Feb 19 14:17:17 2012] Off-axis axis estimate = 6.26'
[Sun Feb 19 14:22:50 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 14:22:50 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Sun Feb 19 14:22:50 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.031
[Sun Feb 19 14:22:50 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 9.56"
[Mon Feb 20 01:36:11 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src71.ximg exists
[Mon Feb 20 01:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src71.csv
[Mon Feb 20 01:36:11 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src71_1.ximg exists
[Mon Feb 20 01:36:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src71.csv
[Mon Feb 20 01:36:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 01:36:14 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Mon Feb 20 01:36:14 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Mon Feb 20 01:36:14 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Mon Feb 20 07:59:05 2012] Spatial fit model total counts = 1945.860000, observed total counts = 1931.000000
[Mon Feb 20 07:59:05 2012] Offset between fit and detection position for source 71 = 1.464774 pixels
[Mon Feb 20 07:59:05 2012] Warning, changing simple spatial fit ID from 71 to 70
[Mon Feb 20 07:59:05 2012] 1839.376000 total counts/ 1273.110000 bgd. counts: snr = 15.870387
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 1.464774 pixels
  Position = (364.0, 353.8) = 18 3 45.94 -21 35 32.9
  Extent = 12.6 (10.2-14.8)", rotation angle = 0
  Source counts = 566.3 +/- 42.9
  Background counts = 1273.1
  Rate = 0.01 +/- 0.001
[Mon Feb 20 07:59:06 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:06 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 07:59:06 2012] Source does appear to be extended
[Mon Feb 20 07:59:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:06 2012] Source is confused with source 70
[Mon Feb 20 07:59:06 2012] Source is confused with source 75
[Mon Feb 20 07:59:06 2012] Source is confused with source 76
[Mon Feb 20 07:59:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 07:59:47 2012] Initial guess for spatial extent in simple fitting = 12.56"
[Mon Feb 20 07:59:47 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Mon Feb 20 07:59:47 2012] Giving source the simple spatial ID 69 for pass 1, mean size = 12.56"
[Tue Feb 21 00:15:57 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src69.ximg exists
[Tue Feb 21 00:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src69.csv
[Tue Feb 21 00:15:57 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src69_1.ximg exists
[Tue Feb 21 00:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src69.csv
[Tue Feb 21 00:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 00:16:00 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Tue Feb 21 00:16:00 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Tue Feb 21 00:16:00 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Tue Feb 21 07:33:38 2012] Warning, spatial fit 69 centroid is now closest to src. 73
[Tue Feb 21 07:33:38 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:38 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:33:38 2012] Source does appear to be extended
[Tue Feb 21 07:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:34:23 2012] XMMSAS src. selection expression = ellipse(31620.320000, 30735.820400, 753.738022, 753.738022, 0.000000, X, Y)
[Tue Feb 21 07:34:23 2012] Writing source region out to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src71_src.reg
[Tue Feb 21 07:34:23 2012] Extracting stamp from image fullrun_pn_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (321, 311) - (407, 397)
[Tue Feb 21 07:34:23 2012] XMMSAS bgd. selection expression = annulus(31620.320000, 30735.820400, 1256.230036, 2512.460072, X, Y) && !ellipse(28859.025800, 32157.494400, 1487.976043, 352.960810, 30.992300, X, Y) && !ellipse(29310.237000, 31896.819160, 1549.896045, 385.447211, 32.757000, X, Y) && !ellipse(30593.063400, 31193.546600, 640.954418, 640.954418, 0.000000, X, Y) && !ellipse(29158.997800, 31074.947400, 518.920015, 518.920015, 0.000000, X, Y) && !ellipse(31261.142000, 30877.543200, 1510.176043, 1510.176043, 0.000000, X, Y) && !ellipse(29792.242462, 30768.236542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32387.161896, 30388.891266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32792.732000, 30215.262000, 343.341610, 343.341610, 0.000000, X, Y) && !ellipse(30954.812171, 30207.419067, 1470.896042, 211.990919, 23.308135, X, Y) && !ellipse(31719.107600, 29871.341800, 1470.896042, 256.268807, 23.910000, X, Y) && !ellipse(33094.006017, 30119.903274, 717.387221, 346.167065, 20.408243, X, Y) && !ellipse(32304.362152, 29623.379944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34051.555880, 29770.571400, 599.285617, 391.065611, 16.740184, X, Y) && !ellipse(32645.220000, 29226.036200, 1560.648045, 1560.648045, 0.000000, X, Y) && !ellipse(33269.838000, 29046.849400, 1588.800046, 1588.800046, 0.000000, X, Y) && !ellipse(29687.764060, 28907.578000, 1318.600038, 1318.600038, 0.000000, X, Y) && !ellipse(30500.893677, 28775.907867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31590.472400, 28218.838200, 343.148010, 343.148010, 0.000000, X, Y) && !ellipse(32696.608000, 27744.286400, 1486.744043, 1486.744043, 0.000000, X, Y) && !ellipse(28945.431488, 29517.951385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32967.668121, 27714.005005, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 07:34:23 2012] Writing fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src71.gif
[Tue Feb 21 09:34:58 2012] Mean detx,y = (4572.32, -3346.95) 
[Tue Feb 21 09:35:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 09:35:20 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 09:35:20 2012] Setting source spectrum file to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue Feb 21 09:35:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Tue Feb 21 20:29:05 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:06 2012] Error reading totcts from fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Tue Feb 21 20:29:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:12 2012] Using photon index=1.80, rate=0.014, arf fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src71.arf
[Tue Feb 21 20:29:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:12 2012] Updating source flux to 4.5e-14
[Tue Feb 21 20:40:39 2012] Flag c found in src. 71 procflags, skipping spectral fitting