[Sun Feb 19 14:17:11 2012] Detection parameters:
  Position = (311.4, 372.9) = 18 4 2.33 -21 34 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.5 +/- 21.7
  Background counts = 81.6
  Rate = 0.008 +/- 0.0008

[Sun Feb 19 14:17:17 2012] Off-axis axis estimate = 5.48'
[Sun Feb 19 14:22:50 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 14:22:50 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Sun Feb 19 14:22:50 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.919
[Sun Feb 19 14:22:50 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 9.17"
[Mon Feb 20 01:36:10 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src65.ximg exists
[Mon Feb 20 01:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src65.csv
[Mon Feb 20 01:36:10 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src65_1.ximg exists
[Mon Feb 20 01:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src65.csv
[Mon Feb 20 01:36:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 01:36:14 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Mon Feb 20 01:36:14 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Mon Feb 20 01:36:14 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Mon Feb 20 07:59:05 2012] Spatial fit model total counts = 1365.060000, observed total counts = 1353.000000
[Mon Feb 20 07:59:05 2012] Offset between fit and detection position for source 65 = 2.790056 pixels
[Mon Feb 20 07:59:05 2012] 1315.856000 total counts/ 972.270000 bgd. counts: snr = 11.018996
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 2.790056 pixels
  Position = (313.4, 370.9) = 18 4 1.72 -21 34 18.8
  Extent = 9.7 (8.3-11.1)", rotation angle = 0
  Source counts = 343.6 +/- 36.3
  Background counts = 972.3
  Rate = 0.009 +/- 0.0009
[Mon Feb 20 07:59:06 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:06 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 07:59:06 2012] Source does appear to be extended
[Mon Feb 20 07:59:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:06 2012] Source is confused with source 62
[Mon Feb 20 07:59:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 07:59:47 2012] Initial guess for spatial extent in simple fitting = 9.69"
[Mon Feb 20 07:59:47 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Mon Feb 20 07:59:47 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 9.69"
[Tue Feb 21 00:15:57 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src63.ximg exists
[Tue Feb 21 00:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src63.csv
[Tue Feb 21 00:15:57 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src63_1.ximg exists
[Tue Feb 21 00:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src63.csv
[Tue Feb 21 00:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 00:16:00 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Tue Feb 21 00:16:00 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Tue Feb 21 00:16:00 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Tue Feb 21 07:33:38 2012] Warning, spatial fit 63 centroid is now closest to src. 60
[Tue Feb 21 07:33:38 2012] Spatial fit model total counts = 1565.540000, observed total counts = 1533.000000
[Tue Feb 21 07:33:38 2012] Offset between fit and detection position for source 65 = 1.754446 pixels
[Tue Feb 21 07:33:38 2012] Warning, changing simple spatial fit ID from 63 to 65
[Tue Feb 21 07:33:38 2012] 1504.620000 total counts/ 1267.930000 bgd. counts: snr = 6.647101
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 1.754446 pixels
  Position = (315.1, 370.5) = 18 4 1.18 -21 34 20.4
  Extent = 16.0" x 4.0", rotation angle = 90
  Source counts = 236.7 +/- 38.8
  Background counts = 1267.9
  Rate = 0.006 +/- 0.001
[Tue Feb 21 07:33:38 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:38 2012] Assessing source extent using major
[Tue Feb 21 07:33:38 2012] Source does appear to be extended
[Tue Feb 21 07:33:38 2012] Computing asymmetry using major and minor axis, asym = 3.96
[Tue Feb 21 07:33:38 2012] Source is asymmetric
[Tue Feb 21 07:34:22 2012] XMMSAS src. selection expression = ellipse(27368.046000, 32187.232072, 961.434028, 242.536561, 90.000000, X, Y)
[Tue Feb 21 07:34:22 2012] Writing source region out to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src65_src.reg
[Tue Feb 21 07:34:22 2012] Extracting stamp from image fullrun_pn_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (260, 315) - (370, 426)
[Tue Feb 21 07:34:22 2012] XMMSAS bgd. selection expression = annulus(27368.046000, 32187.232072, 1602.390046, 3204.780092, X, Y) && !ellipse(22978.354000, 37037.656000, 2585.920074, 2585.920074, 0.000000, X, Y) && !ellipse(23295.293800, 36195.696000, 3017.592087, 3017.592087, 0.000000, X, Y) && !ellipse(22480.186000, 35987.226000, 1696.072049, 1696.072049, 0.000000, X, Y) && !ellipse(23285.670000, 35233.084000, 935.144027, 935.144027, 0.000000, X, Y) && !ellipse(25223.447600, 34720.897200, 652.480019, 652.480019, 0.000000, X, Y) && !ellipse(26081.523628, 34020.482565, 1571.072045, 373.644880, 39.777728, X, Y) && !ellipse(26508.752000, 33716.862000, 901.776026, 901.776026, 0.000000, X, Y) && !ellipse(25552.633270, 33452.999512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27098.971800, 33293.551200, 811.824023, 811.824023, 0.000000, X, Y) && !ellipse(26477.017800, 32748.934400, 1489.824043, 221.476806, 37.509000, X, Y) && !ellipse(28026.437600, 32671.200800, 630.816018, 630.816018, 0.000000, X, Y) && !ellipse(28859.025800, 32157.494400, 1487.976043, 352.960810, 30.992300, X, Y) && !ellipse(29310.237000, 31896.819160, 1549.896045, 385.447211, 32.757000, X, Y) && !ellipse(28066.114000, 31628.071940, 991.992029, 991.992029, 0.000000, X, Y) && !ellipse(30593.063400, 31193.546600, 640.954418, 640.954418, 0.000000, X, Y) && !ellipse(29158.997800, 31074.947400, 518.920015, 518.920015, 0.000000, X, Y) && !ellipse(31261.142000, 30877.543200, 1510.176043, 1510.176043, 0.000000, X, Y) && !ellipse(29792.242462, 30768.236542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30954.812171, 30207.419067, 1470.896042, 211.990919, 23.308135, X, Y) && !ellipse(31719.107600, 29871.341800, 1470.896042, 256.268807, 23.910000, X, Y) && !ellipse(29687.764060, 28907.578000, 1318.600038, 1318.600038, 0.000000, X, Y) && !ellipse(30500.893677, 28775.907867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23631.990387, 33375.021301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25745.914093, 31701.004089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26441.584869, 31107.302368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26857.195190, 30829.464172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28068.730194, 30052.931824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28945.431488, 29517.951385, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 07:34:22 2012] Writing fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src65.gif
[Tue Feb 21 09:22:47 2012] Mean detx,y = (324.09, -4904.56) 
[Tue Feb 21 09:22:52 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 09:23:19 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 09:23:19 2012] Setting source spectrum file to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Tue Feb 21 09:23:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Tue Feb 21 20:29:05 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:05 2012] Error reading totcts from fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Tue Feb 21 20:29:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:12 2012] Using photon index=1.80, rate=0.00586, arf fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src65.arf
[Tue Feb 21 20:29:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:12 2012] Updating source flux to 2.5e-14
[Tue Feb 21 20:40:39 2012] Flag c found in src. 65 procflags, skipping spectral fitting