[Sun Feb 19 14:17:10 2012] Detection parameters:
  Position = (230.0, 425.9) = 18 4 27.73 -21 30 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.1 +/- 21.2
  Background counts = 69.6
  Rate = 0.005 +/- 0.0005

[Sun Feb 19 14:17:16 2012] Off-axis axis estimate = 10.49'
[Sun Feb 19 14:22:50 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 14:22:50 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Sun Feb 19 14:22:50 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.888
[Sun Feb 19 14:22:50 2012] Giving source the simple spatial ID 40 for pass 0, mean size = 11.67"
[Mon Feb 20 01:36:10 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src40.ximg exists
[Mon Feb 20 01:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src40.csv
[Mon Feb 20 01:36:10 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src40_1.ximg exists
[Mon Feb 20 01:36:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src40.csv
[Mon Feb 20 01:36:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 01:36:13 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Mon Feb 20 01:36:13 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Mon Feb 20 01:36:13 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Mon Feb 20 07:59:05 2012] Warning, spatial fit 40 centroid is now closest to src. 46
[Mon Feb 20 07:59:06 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:06 2012] Assessing source extent using major
[Mon Feb 20 07:59:06 2012] Source does appear to be extended
[Mon Feb 20 07:59:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:06 2012] Source is confused with source 36
[Mon Feb 20 07:59:47 2012] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 07:59:47 2012] Initial guess for spatial extent in simple fitting = 11.67"
[Mon Feb 20 07:59:47 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.888
[Mon Feb 20 07:59:47 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 11.67"
[Tue Feb 21 00:15:56 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src39.ximg exists
[Tue Feb 21 00:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src39.csv
[Tue Feb 21 00:15:56 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src39_1.ximg exists
[Tue Feb 21 00:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src39.csv
[Tue Feb 21 00:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 00:15:59 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Tue Feb 21 00:15:59 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Tue Feb 21 00:15:59 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Tue Feb 21 07:33:38 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 13.540017 pixels away
[Tue Feb 21 07:33:38 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:38 2012] Assessing source extent using major
[Tue Feb 21 07:33:38 2012] Source does appear to be extended
[Tue Feb 21 07:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:34:21 2012] XMMSAS src. selection expression = ellipse(19959.196762, 37005.062317, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 07:34:21 2012] Writing source region out to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src40_src.reg
[Tue Feb 21 07:34:21 2012] Extracting stamp from image fullrun_pn_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (192, 388) - (267, 463)
[Tue Feb 21 07:34:21 2012] XMMSAS bgd. selection expression = annulus(19959.196762, 37005.062317, 1087.500000, 2175.000000, X, Y) && !ellipse(20336.528000, 40011.896000, 1276.464037, 1276.464037, 0.000000, X, Y) && !ellipse(18408.224600, 41088.333800, 2433.320070, 304.164809, 57.265000, X, Y) && !ellipse(17953.526566, 39698.305450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20405.845200, 39939.245380, 2096.352060, 518.233615, 54.484000, X, Y) && !ellipse(18193.847200, 39326.861200, 2040.744059, 485.708014, 55.547000, X, Y) && !ellipse(19879.330000, 38993.252000, 1414.024041, 1414.024041, 0.000000, X, Y) && !ellipse(21588.066800, 38441.163800, 1917.128055, 528.588815, 53.391000, X, Y) && !ellipse(20227.114441, 38499.862396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21793.835600, 38239.970000, 883.936025, 883.936025, 0.000000, X, Y) && !ellipse(23699.684000, 38027.088000, 1829.496053, 1829.496053, 0.000000, X, Y) && !ellipse(22202.394000, 37662.990000, 1906.552055, 679.372020, 55.483000, X, Y) && !ellipse(21364.227400, 37201.344000, 647.934419, 647.934419, 0.000000, X, Y) && !ellipse(22978.354000, 37037.656000, 2585.920074, 2585.920074, 0.000000, X, Y) && !ellipse(23295.293800, 36195.696000, 3017.592087, 3017.592087, 0.000000, X, Y) && !ellipse(21634.406000, 36821.594000, 918.488026, 918.488026, 0.000000, X, Y) && !ellipse(20646.262000, 36165.196000, 504.160015, 504.160015, 0.000000, X, Y) && !ellipse(22480.186000, 35987.226000, 1696.072049, 1696.072049, 0.000000, X, Y) && !ellipse(21474.428000, 35242.002000, 2033.776059, 2033.776059, 0.000000, X, Y) && !ellipse(22075.921000, 34753.372200, 1671.848048, 361.931210, 225.854000, X, Y) && !ellipse(22568.941600, 34267.442000, 1571.072045, 431.520012, 40.489900, X, Y) && !ellipse(22300.794000, 34487.906000, 1601.296046, 1601.296046, 0.000000, X, Y)
[Tue Feb 21 07:34:21 2012] Writing fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src40.gif
[Tue Feb 21 08:23:09 2012] Mean detx,y = (-7033.33, -9533.89) 
[Tue Feb 21 08:23:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 08:23:29 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 08:23:29 2012] Setting source spectrum file to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Feb 21 08:23:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Tue Feb 21 12:43:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 21 12:43:23 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:04 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:04 2012] Error reading totcts from fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Feb 21 20:29:10 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:10 2012] Using photon index=1.80, rate=0.00463, arf fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src40.arf
[Tue Feb 21 20:29:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:10 2012] Updating source flux to 2.9e-14
[Tue Feb 21 20:40:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting