[Sun Feb 19 14:17:08 2012] Detection parameters:
  Position = (187.9, 484.7) = 18 4 40.83 -21 26 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 785.2 +/- 65.9
  Background counts = 58.9
  Rate = 0.02 +/- 0.002

[Sun Feb 19 14:17:16 2012] Off-axis axis estimate = 15.70'
[Sun Feb 19 14:22:50 2012] Using EEF radius (= 14.28 ")to estimate initial spatial extent for simple fitting
[Sun Feb 19 14:22:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb 19 14:22:50 2012] Initial guess for spatial extent in simple fitting = 14.28"
[Sun Feb 19 14:22:50 2012] source mask rpix=3.3, npix_max = 57, mask sum = 42, frac = 0.734
[Sun Feb 19 14:22:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 14.28"
[Mon Feb 20 01:36:09 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 20 01:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src1.csv
[Mon Feb 20 01:36:09 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 20 01:36:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src1.csv
[Mon Feb 20 01:36:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 01:36:11 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 20 01:36:11 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 20 01:36:11 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 20 07:59:05 2012] Warning, spatial fit 1 centroid is now closest to src. 23
[Mon Feb 20 07:59:05 2012] Source 1 is offset by -3.604333 and -0.916195 pixels which is larger than
2 X fitted extent = 1.657370 x 1.657370, not incorporating fit results
[Mon Feb 20 07:59:06 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:06 2012] Assessing source extent using major
[Mon Feb 20 07:59:06 2012] Source does appear to be extended
[Mon Feb 20 07:59:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:06 2012] Source is confused with source 6
[Mon Feb 20 07:59:06 2012] Source is confused with source 7
[Mon Feb 20 07:59:47 2012] Using EEF radius (= 14.28 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 07:59:47 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 07:59:47 2012] Initial guess for spatial extent in simple fitting = 14.28"
[Mon Feb 20 07:59:47 2012] source mask rpix=3.3, npix_max = 57, mask sum = 42, frac = 0.734
[Mon Feb 20 07:59:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.28"
[Tue Feb 21 00:15:55 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 21 00:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 00:15:55 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 21 00:15:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 00:15:55 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 00:15:58 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 21 00:15:58 2012] fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 21 00:15:58 2012] Fit fullrun_pn_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 21 07:33:38 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Tue Feb 21 07:33:38 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:38 2012] Assessing source extent using major
[Tue Feb 21 07:33:38 2012] Source does appear to be extended
[Tue Feb 21 07:33:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 07:34:19 2012] XMMSAS src. selection expression = ellipse(16298.595032, 42121.463074, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 07:34:19 2012] Writing source region out to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src1_src.reg
[Tue Feb 21 07:34:19 2012] Extracting stamp from image fullrun_pn_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (150, 447) - (225, 522)
[Tue Feb 21 07:34:19 2012] XMMSAS bgd. selection expression = annulus(16298.595032, 42121.463074, 1087.500000, 2175.000000, X, Y) && !ellipse(16347.697144, 43025.620026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15811.430900, 43611.862000, 982.560028, 982.560028, 0.000000, X, Y) && !ellipse(16857.290000, 41510.764000, 773.908822, 773.908822, 0.000000, X, Y) && !ellipse(16990.782000, 43641.536000, 560.564816, 560.564816, 0.000000, X, Y) && !ellipse(18327.937469, 43279.687744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17280.230000, 42726.226000, 558.212016, 558.212016, 0.000000, X, Y) && !ellipse(17687.290000, 42265.884000, 368.078411, 368.078411, 0.000000, X, Y) && !ellipse(13772.066498, 42306.319489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18009.271951, 41728.316293, 2245.104065, 284.761006, 240.194106, X, Y) && !ellipse(18716.979600, 42537.649800, 978.464028, 978.464028, 0.000000, X, Y) && !ellipse(13537.322000, 41961.962000, 1164.440034, 1164.440034, 0.000000, X, Y) && !ellipse(13750.244000, 41218.920000, 564.196016, 564.196016, 0.000000, X, Y) && !ellipse(18408.224600, 41088.333800, 2433.320070, 304.164809, 57.265000, X, Y) && !ellipse(17369.320000, 40593.258000, 1282.944037, 1282.944037, 0.000000, X, Y) && !ellipse(14708.212000, 39927.680000, 1208.320035, 1208.320035, 0.000000, X, Y) && !ellipse(17688.826782, 40145.531860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18931.797333, 40329.480255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14667.590600, 39778.017400, 731.032821, 731.032821, 0.000000, X, Y) && !ellipse(17953.526566, 39698.305450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20405.845200, 39939.245380, 2096.352060, 518.233615, 54.484000, X, Y) && !ellipse(18193.847200, 39326.861200, 2040.744059, 485.708014, 55.547000, X, Y) && !ellipse(19879.330000, 38993.252000, 1414.024041, 1414.024041, 0.000000, X, Y) && !ellipse(17954.161118, 43758.636444, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 07:34:19 2012] Writing fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src1.gif
[Tue Feb 21 07:34:44 2012] Mean detx,y = (-10625.35, -14655.95) 
[Tue Feb 21 07:34:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 07:35:09 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 07:35:10 2012] Setting source spectrum file to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 21 07:35:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Feb 21 10:50:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 21 10:50:04 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:01 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:01 2012] Error reading totcts from fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Feb 21 20:29:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:08 2012] Using photon index=1.80, rate=0.0194, arf fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src1.arf
[Tue Feb 21 20:29:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:08 2012] Updating source flux to 2.3e-13
[Tue Feb 21 20:40:39 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Feb 21 20:52:06 2012] xmm0503170101/analysis//spectral/fullrun_pn_xmm0503170101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete