[Sun Feb 19 14:18:55 2012] Detection parameters:
  Position = (508.6, 309.6) = 18 3 0.83 -21 38 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29.0 +/- 6.8
  Background counts = 7.4
  Rate = 0.002 +/- 0.0005

[Sun Feb 19 14:18:56 2012] Off-axis axis estimate = 15.26'
[Mon Feb 20 06:25:10 2012] Using EEF radius (= 14.06 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 06:25:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 06:25:10 2012] Initial guess for spatial extent in simple fitting = 14.06"
[Mon Feb 20 06:25:10 2012] source mask rpix=3.2, npix_max = 55, mask sum = 28, frac = 0.503
[Mon Feb 20 06:25:10 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 14.06"
[Mon Feb 20 07:58:40 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_src39.ximg exists
[Mon Feb 20 07:58:40 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Feb 20 07:58:40 2012] Fit fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_src39 appears to have run properly
[Mon Feb 20 07:58:41 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Feb 20 07:58:41 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Feb 20 07:58:41 2012] Fit fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Feb 20 07:59:27 2012] Spatial fit model total counts = 81.443100, observed total counts = 90.000000
[Mon Feb 20 07:59:27 2012] Offset between fit and detection position for source 21 = 0.933338 pixels
[Mon Feb 20 07:59:27 2012] 73.494900 total counts/ 51.740600 bgd. counts: snr = 3.024331
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.933338 pixels
  Position = (507.7, 309.4) = 18 3 1.12 -21 38 45.4
  Extent = 3.5" x 3.5", rotation angle = 0
  Source counts = 21.8 +/- 8.6
  Background counts = 51.7
  Rate = 0.002 +/- 0.0007
[Mon Feb 20 07:59:27 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:27 2012] Assessing source extent using major
[Mon Feb 20 07:59:27 2012] Source does appear to be extended
[Mon Feb 20 07:59:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 05:29:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 05:29:49 2012] Initial guess for spatial extent in simple fitting = 3.51"
[Tue Feb 21 05:29:49 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.315
[Tue Feb 21 05:29:49 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 3.51"
[Tue Feb 21 07:32:57 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_src37.ximg exists
[Tue Feb 21 07:32:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_src37.csv
[Tue Feb 21 07:32:57 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_src37_1.ximg exists
[Tue Feb 21 07:32:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_src37.csv
[Tue Feb 21 07:32:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:32:58 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Tue Feb 21 07:32:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Tue Feb 21 07:32:58 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Tue Feb 21 07:32:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Tue Feb 21 07:32:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:33:58 2012] Spatial fit model total counts = 59.561900, observed total counts = 67.000000
[Tue Feb 21 07:33:58 2012] Offset between fit and detection position for source 21 = 0.038272 pixels
[Tue Feb 21 07:33:58 2012] 52.249600 total counts/ 31.259300 bgd. counts: snr = 3.754300
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.038272 pixels
  Position = (507.6, 309.4) = 18 3 1.12 -21 38 45.5
  Extent = 3.2 (2.2-5.0)", rotation angle = 0
  Source counts = 21.0 +/- 7.2
  Background counts = 31.3
  Rate = 0.002 +/- 0.0006
[Tue Feb 21 07:33:58 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:58 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:33:58 2012] Source does appear to be extended
[Tue Feb 21 07:33:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 19:23:20 2012] XMMSAS src. selection expression = ellipse(44114.469800, 26868.731400, 194.794206, 194.794206, 0.000000, X, Y)
[Tue Feb 21 19:23:20 2012] Writing source region out to fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src21_src.reg
[Tue Feb 21 19:23:20 2012] Extracting stamp from image fullrun_mos2_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (496, 298) - (519, 321)
[Tue Feb 21 19:23:20 2012] XMMSAS bgd. selection expression = annulus(44114.469800, 26868.731400, 324.657009, 649.314019, X, Y) && !ellipse(43615.945000, 24912.122200, 1544.840044, 937.576027, 298.074086, X, Y)
[Tue Feb 21 19:23:20 2012] Writing fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src21.gif
[Tue Feb 21 19:42:00 2012] Mean detx,y = (-17004.32, -381.45) 
[Tue Feb 21 19:42:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 19:42:20 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 19:42:20 2012] Setting source spectrum file to fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Feb 21 19:42:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Feb 21 20:27:09 2012] Not generating rmf since there are only 20 counts
[Tue Feb 21 20:27:09 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:23 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:23 2012] Error reading totcts from fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Feb 21 20:29:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:25 2012] Using photon index=1.80, rate=0.00167, arf fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src21.arf
[Tue Feb 21 20:29:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:25 2012] Updating source flux to 1.9e-13
[Tue Feb 21 20:38:14 2012] Source 21 has fewer than 100.000000 counts, skipping spectral fitting