[Sun Feb 19 14:18:55 2012] Detection parameters:
  Position = (335.5, 338.2) = 18 3 54.83 -21 36 41.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.3 +/- 9.9
  Background counts = 10.6
  Rate = 0.004 +/- 0.0009

[Sun Feb 19 14:18:56 2012] Off-axis axis estimate = 3.94'
[Mon Feb 20 06:25:10 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 06:25:10 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Mon Feb 20 06:25:10 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.058
[Mon Feb 20 06:25:10 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.40"
[Mon Feb 20 07:58:40 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_src29.ximg exists
[Mon Feb 20 07:58:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_src29.csv
[Mon Feb 20 07:58:40 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Feb 20 07:58:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_src29.csv
[Mon Feb 20 07:58:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 07:58:41 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Feb 20 07:58:41 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Feb 20 07:58:41 2012] Fit fullrun_mos2_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Feb 20 07:59:27 2012] Source 17 is offset by -1.675627 and 0.951360 pixels which is larger than
2 X fitted extent = 0.979954 x 0.979954, not incorporating fit results
[Mon Feb 20 07:59:27 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 10.936098 pixels away
[Mon Feb 20 07:59:27 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:27 2012] Assessing source extent using major
[Mon Feb 20 07:59:27 2012] Source does appear to be extended
[Mon Feb 20 07:59:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:27 2012] Source is confused with source 16
[Tue Feb 21 05:29:49 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 05:29:49 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Tue Feb 21 05:29:49 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.058
[Tue Feb 21 05:29:49 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 8.40"
[Tue Feb 21 07:32:57 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_src28.ximg exists
[Tue Feb 21 07:32:57 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Feb 21 07:32:57 2012] Fit fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_src28 appears to have run properly
[Tue Feb 21 07:32:57 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Feb 21 07:32:57 2012] fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Feb 21 07:32:57 2012] Fit fullrun_mos2_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Feb 21 07:33:58 2012] Spatial fit model total counts = 223.866000, observed total counts = 223.000000
[Tue Feb 21 07:33:58 2012] Offset between fit and detection position for source 17 = 2.794072 pixels
[Tue Feb 21 07:33:58 2012] 225.574300 total counts/ 176.538000 bgd. counts: snr = 3.690614
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 2.794072 pixels
  Position = (332.8, 339.1) = 18 3 55.66 -21 36 37.1
  Extent = 16.8 (13.3-33.6)", rotation angle = 23 (21-27) degrees
  Source counts = 49.0 +/- 15.0
  Background counts = 176.5
  Rate = 0.004 +/- 0.001
[Tue Feb 21 07:33:58 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:58 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:33:58 2012] Source does appear to be extended
[Tue Feb 21 07:33:58 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 4.88
[Tue Feb 21 07:33:58 2012] Source is asymmetric
[Tue Feb 21 19:23:19 2012] XMMSAS src. selection expression = ellipse(28907.764400, 29453.924080, 1007.952029, 125.994004, 23.287800, X, Y)
[Tue Feb 21 19:23:19 2012] Writing source region out to fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src17_src.reg
[Tue Feb 21 19:23:19 2012] Extracting stamp from image fullrun_mos2_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (275, 281) - (391, 397)
[Tue Feb 21 19:23:19 2012] XMMSAS bgd. selection expression = annulus(28907.764400, 29453.924080, 1679.920048, 3359.840097, X, Y) && !ellipse(31382.590400, 28494.249600, 586.964817, 586.964817, 0.000000, X, Y) && !ellipse(32344.655800, 28180.702200, 547.294416, 547.294416, 0.000000, X, Y) && !ellipse(30015.277839, 28813.681687, 479.024368, 332.556010, 13.197434, X, Y) && !ellipse(28692.459200, 29849.360000, 1442.456042, 1442.456042, 0.000000, X, Y) && !ellipse(29443.489584, 31010.438600, 505.276015, 505.276015, 0.000000, X, Y) && !ellipse(26149.434000, 31017.770000, 1385.680040, 1385.680040, 0.000000, X, Y) && !ellipse(32721.150000, 29412.074000, 1497.600043, 1497.600043, 0.000000, X, Y)
[Tue Feb 21 19:23:19 2012] Writing fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src17.gif
[Tue Feb 21 19:37:09 2012] Mean detx,y = (-1874.47, 1989.93) 
[Tue Feb 21 19:37:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 19:37:33 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 19:37:34 2012] Setting source spectrum file to fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Feb 21 19:37:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Feb 21 20:26:02 2012] Not generating rmf since there are only 49 counts
[Tue Feb 21 20:26:02 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:23 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:23 2012] Error reading totcts from fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Feb 21 20:29:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:24 2012] Using photon index=1.80, rate=0.00391, arf fullrun_mos2_xmm0503170101_pi300-10000_pass1_cl_src17.arf
[Tue Feb 21 20:29:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:24 2012] Updating source flux to 6.4e-14
[Tue Feb 21 20:38:14 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Tue Feb 21 20:38:14 2012] Flag c found in src. 17 procflags, skipping spectral fitting
[Tue Feb 21 20:38:14 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting