[Sun Feb 19 14:18:16 2012] Detection parameters:
  Position = (495.2, 287.2) = 18 3 4.99 -21 40 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.1 +/- 17.3
  Background counts = 23.2
  Rate = 0.004 +/- 0.0004

[Sun Feb 19 14:18:17 2012] Off-axis axis estimate = 14.29'
[Mon Feb 20 01:36:15 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 01:36:15 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Mon Feb 20 01:36:15 2012] source mask rpix=3.1, npix_max = 52, mask sum = 47, frac = 0.897
[Mon Feb 20 01:36:15 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 13.57"
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src44.ximg exists
[Mon Feb 20 06:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src44.csv
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src44_1.ximg exists
[Mon Feb 20 06:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src44.csv
[Mon Feb 20 06:25:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Mon Feb 20 06:25:10 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly
[Mon Feb 20 07:59:20 2012] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 62 at 15.786419 pixels away
[Mon Feb 20 07:59:20 2012] Warning, spatial fit 44 centroid is now closest to src. 66
[Mon Feb 20 07:59:20 2012] Source 62 is offset by 7.373670 and -1.956311 pixels which is larger than
2 X fitted extent = 1.586455 x 1.586455, not incorporating fit results
[Mon Feb 20 07:59:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:20 2012] Assessing source extent using major
[Mon Feb 20 07:59:20 2012] Source does appear to be extended
[Mon Feb 20 07:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:20 2012] Source is confused with source 23
[Tue Feb 21 00:16:01 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:16:01 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Tue Feb 21 00:16:01 2012] source mask rpix=3.1, npix_max = 52, mask sum = 47, frac = 0.897
[Tue Feb 21 00:16:01 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 13.57"
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src42.ximg exists
[Tue Feb 21 05:29:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src42.csv
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src42_1.ximg exists
[Tue Feb 21 05:29:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src42.csv
[Tue Feb 21 05:29:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 05:29:49 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Tue Feb 21 05:29:49 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Tue Feb 21 05:29:49 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Tue Feb 21 07:33:51 2012] Spatial fit model total counts = 737.997000, observed total counts = 738.000000
[Tue Feb 21 07:33:51 2012] Offset between fit and detection position for source 62 = 0.589584 pixels
[Tue Feb 21 07:33:51 2012] 454.850600 total counts/ 380.474000 bgd. counts: snr = 3.813062
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.589584 pixels
  Position = (494.7, 287.6) = 18 3 5.14 -21 40 20.5
  Extent = 3.8 (3.4-4.9)", rotation angle = 0
  Source counts = 74.4 +/- 21.3
  Background counts = 380.5
  Rate = 0.002 +/- 0.0005
[Tue Feb 21 07:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:51 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:33:51 2012] Source does appear to be extended
[Tue Feb 21 07:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:23:05 2012] XMMSAS src. selection expression = ellipse(42991.058880, 24971.422100, 226.451407, 226.451407, 0.000000, X, Y)
[Tue Feb 21 16:23:05 2012] Writing source region out to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src62_src.reg
[Tue Feb 21 16:23:05 2012] Extracting stamp from image fullrun_mos1_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (482, 275) - (508, 301)
[Tue Feb 21 16:23:05 2012] XMMSAS bgd. selection expression = annulus(42991.058880, 24971.422100, 377.419011, 754.838022, X, Y) && !ellipse(43582.985016, 25010.441772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43505.559052, 23976.711426, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 16:23:05 2012] Writing fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src62.gif
[Tue Feb 21 16:45:32 2012] Mean detx,y = (-2175.45, 15734.56) 
[Tue Feb 21 16:45:34 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:45:46 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:45:46 2012] Setting source spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Tue Feb 21 16:45:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Tue Feb 21 18:54:26 2012] Not generating rmf since there are only 74 counts
[Tue Feb 21 18:54:26 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:17 2012] Error reading totcts from fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Tue Feb 21 20:29:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:20 2012] Using photon index=1.80, rate=0.00178, arf fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src62.arf
[Tue Feb 21 20:29:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:20 2012] Updating source flux to 6.5e-14
[Tue Feb 21 20:29:29 2012] Flag b found in src. 62 procflags, skipping spectral fitting
[Tue Feb 21 20:29:29 2012] Flag c found in src. 62 procflags, skipping spectral fitting
[Tue Feb 21 20:29:29 2012] Source 62 has fewer than 100.000000 counts, skipping spectral fitting