[Sun Feb 19 14:18:16 2012] Detection parameters:
  Position = (453.5, 287.2) = 18 3 17.99 -21 40 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.5 +/- 14.3
  Background counts = 30.9
  Rate = 0.004 +/- 0.0007

[Sun Feb 19 14:18:17 2012] Off-axis axis estimate = 11.27'
[Mon Feb 20 01:36:15 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 01:36:15 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Mon Feb 20 01:36:15 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.980
[Mon Feb 20 01:36:15 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 12.07"
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src45.ximg exists
[Mon Feb 20 06:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src45.csv
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src45_1.ximg exists
[Mon Feb 20 06:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src45.csv
[Mon Feb 20 06:25:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Mon Feb 20 06:25:10 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Mon Feb 20 07:59:20 2012] Spatial fit model total counts = 592.203000, observed total counts = 593.000000
[Mon Feb 20 07:59:20 2012] Offset between fit and detection position for source 58 = 1.133962 pixels
[Mon Feb 20 07:59:20 2012] 393.190800 total counts/ 332.469000 bgd. counts: snr = 3.330190
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 1.133962 pixels
  Position = (452.4, 287.3) = 18 3 18.35 -21 40 22.1
  Extent = 5.7 (4.1-8.2)", rotation angle = 0
  Source counts = 60.7 +/- 19.8
  Background counts = 332.5
  Rate = 0.001 +/- 0.0005
[Mon Feb 20 07:59:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:20 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 07:59:20 2012] Source does appear to be extended
[Mon Feb 20 07:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:20 2012] Source is confused with source 63
[Mon Feb 20 07:59:20 2012] Source is confused with source 60
[Tue Feb 21 00:16:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:16:01 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Tue Feb 21 00:16:01 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.909
[Tue Feb 21 00:16:01 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 5.73"
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src43.ximg exists
[Tue Feb 21 05:29:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src43.csv
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src43_1.ximg exists
[Tue Feb 21 05:29:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src43.csv
[Tue Feb 21 05:29:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 05:29:49 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Tue Feb 21 05:29:49 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Tue Feb 21 05:29:49 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Tue Feb 21 07:33:51 2012] Warning, spatial fit 43 centroid is now closest to src. 63
[Tue Feb 21 07:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:51 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:33:51 2012] Source does appear to be extended
[Tue Feb 21 07:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:23:05 2012] XMMSAS src. selection expression = ellipse(39309.496000, 24945.401900, 343.624210, 343.624210, 0.000000, X, Y)
[Tue Feb 21 16:23:05 2012] Writing source region out to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src58_src.reg
[Tue Feb 21 16:23:05 2012] Extracting stamp from image fullrun_mos1_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (433, 268) - (472, 307)
[Tue Feb 21 16:23:05 2012] XMMSAS bgd. selection expression = annulus(39309.496000, 24945.401900, 572.707016, 1145.414033, X, Y) && !ellipse(38179.543600, 24928.801800, 597.396817, 597.396817, 0.000000, X, Y) && !ellipse(37809.546300, 24047.471240, 573.368816, 573.368816, 0.000000, X, Y) && !ellipse(40711.198600, 24918.400200, 727.636821, 727.636821, 0.000000, X, Y) && !ellipse(39544.082000, 24913.368000, 916.328026, 916.328026, 0.000000, X, Y) && !ellipse(38827.468005, 24968.390992, 2153.848062, 276.189321, 359.921661, X, Y)
[Tue Feb 21 16:23:05 2012] Writing fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src58.gif
[Tue Feb 21 16:45:51 2012] Mean detx,y = (-2233.44, 12044.06) 
[Tue Feb 21 16:45:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:46:05 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:46:05 2012] Setting source spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Tue Feb 21 16:46:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Tue Feb 21 18:54:35 2012] Not generating rmf since there are only 60 counts
[Tue Feb 21 18:54:35 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:17 2012] Error reading totcts from fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Tue Feb 21 20:29:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:20 2012] Using photon index=1.80, rate=0.00145, arf fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src58.arf
[Tue Feb 21 20:29:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:20 2012] Updating source flux to 3.1e-14
[Tue Feb 21 20:29:29 2012] Flag c found in src. 58 procflags, skipping spectral fitting
[Tue Feb 21 20:29:29 2012] Source 58 has fewer than 100.000000 counts, skipping spectral fitting