[Sun Feb 19 14:18:16 2012] Detection parameters:
  Position = (322.4, 254.1) = 18 3 58.90 -21 42 46.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.5 +/- 11.2
  Background counts = 26.3
  Rate = 0.001 +/- 0.0003

[Sun Feb 19 14:18:17 2012] Off-axis axis estimate = 3.66'
[Mon Feb 20 01:36:15 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 01:36:15 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Mon Feb 20 01:36:15 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.869
[Mon Feb 20 01:36:16 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 8.26"
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src66.ximg exists
[Mon Feb 20 06:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src66.csv
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src66_1.ximg exists
[Mon Feb 20 06:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src66.csv
[Mon Feb 20 06:25:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Mon Feb 20 06:25:10 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Mon Feb 20 07:59:20 2012] Warning, spatial fit 66 centroid is now closest to src. 34
[Mon Feb 20 07:59:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:20 2012] Assessing source extent using major
[Mon Feb 20 07:59:20 2012] Source does appear to be extended
[Mon Feb 20 07:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:20 2012] Source is confused with source 34
[Tue Feb 21 00:16:01 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:16:01 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Tue Feb 21 00:16:01 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.869
[Tue Feb 21 00:16:01 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 8.26"
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src64.ximg exists
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src64_1.ximg exists
[Tue Feb 21 05:29:48 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src64 appears to have run properly
[Tue Feb 21 05:29:49 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Tue Feb 21 05:29:49 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Tue Feb 21 05:29:49 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Tue Feb 21 07:33:51 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 68.929293 pixels away
[Tue Feb 21 07:33:51 2012] Source 57 is offset by 5.746740 and 1.149127 pixels which is larger than
2 X fitted extent = 2.538814 x 1.679149, not incorporating fit results
[Tue Feb 21 07:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:51 2012] Assessing source extent using major
[Tue Feb 21 07:33:51 2012] Source does appear to be extended
[Tue Feb 21 07:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:23:06 2012] XMMSAS src. selection expression = ellipse(28002.670410, 22055.534882, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 16:23:06 2012] Writing source region out to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src57_src.reg
[Tue Feb 21 16:23:06 2012] Extracting stamp from image fullrun_mos1_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (285, 217) - (360, 292)
[Tue Feb 21 16:23:06 2012] XMMSAS bgd. selection expression = annulus(28002.670410, 22055.534882, 1087.500000, 2175.000000, X, Y) && !ellipse(27494.592400, 21956.840000, 379.228811, 379.228811, 0.000000, X, Y) && !ellipse(30604.007050, 23456.315063, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 16:23:06 2012] Writing fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src57.gif
[Tue Feb 21 16:56:33 2012] Mean detx,y = (-5236.90, 565.37) 
[Tue Feb 21 16:56:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:56:59 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:57:00 2012] Setting source spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Feb 21 16:57:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Tue Feb 21 19:22:45 2012] Not generating rmf since there are only 42 counts
[Tue Feb 21 19:22:45 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:18 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:18 2012] Error reading totcts from fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Tue Feb 21 20:29:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:21 2012] Using photon index=1.80, rate=0.00129, arf fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src57.arf
[Tue Feb 21 20:29:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:21 2012] Updating source flux to 1.6e-14
[Tue Feb 21 20:29:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting