[Sun Feb 19 14:18:16 2012] Detection parameters:
  Position = (374.9, 353.6) = 18 3 42.53 -21 35 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.8 +/- 19.9
  Background counts = 24.1
  Rate = 0.006 +/- 0.0006

[Sun Feb 19 14:18:17 2012] Off-axis axis estimate = 6.84'
[Mon Feb 20 01:36:15 2012] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 01:36:15 2012] Initial guess for spatial extent in simple fitting = 9.85"
[Mon Feb 20 01:36:15 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.982
[Mon Feb 20 01:36:15 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 9.85"
[Mon Feb 20 06:25:08 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src29.ximg exists
[Mon Feb 20 06:25:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src29.csv
[Mon Feb 20 06:25:08 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Feb 20 06:25:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src29.csv
[Mon Feb 20 06:25:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Feb 20 06:25:10 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Feb 20 07:59:19 2012] Source 44 is offset by 2.169489 and -7.627680 pixels which is larger than
2 X fitted extent = 1.153471 x 1.153471, not incorporating fit results
[Mon Feb 20 07:59:19 2012] Spatial fit model total counts = 717.830000, observed total counts = 719.000000
[Mon Feb 20 07:59:19 2012] Offset between fit and detection position for source 44 = 0.819988 pixels
[Mon Feb 20 07:59:19 2012] 681.427000 total counts/ 322.232000 bgd. counts: snr = 20.009948
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.819988 pixels
  Position = (374.7, 352.8) = 18 3 42.61 -21 35 37.3
  Extent = 12.4 (10.8-14.5)", rotation angle = 0
  Source counts = 359.2 +/- 26.1
  Background counts = 322.2
  Rate = 0.009 +/- 0.0006
[Mon Feb 20 07:59:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:20 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 07:59:20 2012] Source does appear to be extended
[Mon Feb 20 07:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:20 2012] Source is confused with source 46
[Tue Feb 21 00:16:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:16:01 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Tue Feb 21 00:16:01 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.938
[Tue Feb 21 00:16:01 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 12.38"
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src28.ximg exists
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src28_1.ximg exists
[Tue Feb 21 05:29:47 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src28 appears to have run properly
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Feb 21 05:29:48 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Feb 21 07:33:51 2012] Warning, spatial fit 28 centroid is now closest to src. 46
[Tue Feb 21 07:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:51 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:33:51 2012] Source does appear to be extended
[Tue Feb 21 07:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:23:05 2012] XMMSAS src. selection expression = ellipse(32549.096000, 30646.953600, 742.512021, 742.512021, 0.000000, X, Y)
[Tue Feb 21 16:23:05 2012] Writing source region out to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src44_src.reg
[Tue Feb 21 16:23:05 2012] Extracting stamp from image fullrun_mos1_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (332, 310) - (417, 395)
[Tue Feb 21 16:23:05 2012] XMMSAS bgd. selection expression = annulus(32549.096000, 30646.953600, 1237.520036, 2475.040071, X, Y) && !ellipse(31790.739800, 29816.140600, 1183.224034, 1183.224034, 0.000000, X, Y) && !ellipse(33119.516600, 30439.880000, 1529.544044, 1022.168029, 62.348000, X, Y) && !ellipse(31645.939000, 29919.090600, 592.812017, 592.812017, 0.000000, X, Y) && !ellipse(29457.576019, 30901.508392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33314.263611, 29998.044403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30064.928540, 28790.942800, 434.908013, 434.908013, 0.000000, X, Y) && !ellipse(29733.906158, 31907.753876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29295.367004, 31873.567719, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 16:23:05 2012] Writing fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src44.gif
[Tue Feb 21 16:37:43 2012] Mean detx,y = (3330.15, 5311.08) 
[Tue Feb 21 16:37:45 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:38:09 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:38:09 2012] Setting source spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Feb 21 16:38:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue Feb 21 20:29:16 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:16 2012] Error reading totcts from fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Feb 21 20:29:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:20 2012] Using photon index=1.80, rate=0.00858, arf fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src44.arf
[Tue Feb 21 20:29:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:20 2012] Updating source flux to 1.1e-13
[Tue Feb 21 20:29:29 2012] Flag b found in src. 44 procflags, skipping spectral fitting
[Tue Feb 21 20:29:29 2012] Flag c found in src. 44 procflags, skipping spectral fitting