[Sun Feb 19 14:18:15 2012] Detection parameters:
  Position = (230.1, 356.6) = 18 4 27.71 -21 35 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.4 +/- 10.7
  Background counts = 24.1
  Rate = 0.002 +/- 0.0004

[Sun Feb 19 14:18:17 2012] Off-axis axis estimate = 6.51'
[Mon Feb 20 01:36:15 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 01:36:15 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Mon Feb 20 01:36:15 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.010
[Mon Feb 20 01:36:15 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 9.68"
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src59.ximg exists
[Mon Feb 20 06:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src59.csv
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src59_1.ximg exists
[Mon Feb 20 06:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src59.csv
[Mon Feb 20 06:25:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Mon Feb 20 06:25:10 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Mon Feb 20 07:59:20 2012] Source 43 is offset by -2.821445 and -6.600743 pixels which is larger than
2 X fitted extent = 1.335237 x 1.335237, not incorporating fit results
[Mon Feb 20 07:59:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:20 2012] Assessing source extent using major
[Mon Feb 20 07:59:20 2012] Source does appear to be extended
[Mon Feb 20 07:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 00:16:01 2012] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:16:01 2012] Initial guess for spatial extent in simple fitting = 9.68"
[Tue Feb 21 00:16:01 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.010
[Tue Feb 21 00:16:01 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 9.68"
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src57.ximg exists
[Tue Feb 21 05:29:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src57.csv
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src57_1.ximg exists
[Tue Feb 21 05:29:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src57.csv
[Tue Feb 21 05:29:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 05:29:49 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Tue Feb 21 05:29:49 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Tue Feb 21 05:29:49 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Tue Feb 21 07:33:51 2012] Source 43 is offset by -2.809422 and -6.597134 pixels which is larger than
2 X fitted extent = 1.395218 x 1.395218, not incorporating fit results
[Tue Feb 21 07:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:51 2012] Assessing source extent using major
[Tue Feb 21 07:33:51 2012] Source does appear to be extended
[Tue Feb 21 07:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:23:06 2012] XMMSAS src. selection expression = ellipse(19968.878326, 30973.531372, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 16:23:06 2012] Writing source region out to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src43_src.reg
[Tue Feb 21 16:23:06 2012] Extracting stamp from image fullrun_mos1_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (193, 319) - (268, 394)
[Tue Feb 21 16:23:06 2012] XMMSAS bgd. selection expression = annulus(19968.878326, 30973.531372, 1087.500000, 2175.000000, X, Y) && !ellipse(22225.021478, 30115.856400, 251.138407, 251.138407, 0.000000, X, Y)
[Tue Feb 21 16:23:06 2012] Writing fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src43.gif
[Tue Feb 21 16:52:51 2012] Mean detx,y = (3582.78, -7462.15) 
[Tue Feb 21 16:52:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:53:32 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:53:33 2012] Setting source spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Tue Feb 21 16:53:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Tue Feb 21 19:15:03 2012] Not generating rmf since there are only 47 counts
[Tue Feb 21 19:15:03 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:18 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:18 2012] Error reading totcts from fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Tue Feb 21 20:29:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:21 2012] Using photon index=1.80, rate=0.00193, arf fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src43.arf
[Tue Feb 21 20:29:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:21 2012] Updating source flux to 3.2e-14
[Tue Feb 21 20:29:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting