[Sun Feb 19 14:18:15 2012] Detection parameters:
  Position = (222.8, 463.1) = 18 4 29.96 -21 27 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.2 +/- 21.0
  Background counts = 21.4
  Rate = 0.005 +/- 0.0005

[Sun Feb 19 14:18:17 2012] Off-axis axis estimate = 13.14'
[Mon Feb 20 01:36:15 2012] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 01:36:15 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Mon Feb 20 01:36:15 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.863
[Mon Feb 20 01:36:15 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 13.00"
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src41.ximg exists
[Mon Feb 20 06:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src41.csv
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src41_1.ximg exists
[Mon Feb 20 06:25:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src41.csv
[Mon Feb 20 06:25:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Mon Feb 20 06:25:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Mon Feb 20 06:25:10 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Mon Feb 20 06:25:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Mon Feb 20 06:25:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 07:59:20 2012] Warning, spatial fit 41 centroid is now closest to src. 1
[Mon Feb 20 07:59:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:20 2012] Assessing source extent using major
[Mon Feb 20 07:59:20 2012] Source does appear to be extended
[Mon Feb 20 07:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 00:16:01 2012] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:16:01 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Tue Feb 21 00:16:01 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.863
[Tue Feb 21 00:16:01 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 13.00"
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src39.ximg exists
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src39_1.ximg exists
[Tue Feb 21 05:29:47 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src39 appears to have run properly
[Tue Feb 21 05:29:49 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Tue Feb 21 05:29:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src39.csv
[Tue Feb 21 05:29:49 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Tue Feb 21 05:29:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src39.csv
[Tue Feb 21 05:29:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 07:33:51 2012] Source 24 is offset by 6.779141 and 3.669617 pixels which is larger than
2 X fitted extent = 2.229977 x 2.229977, not incorporating fit results
[Tue Feb 21 07:33:51 2012] Source 24 is offset by 7.914493 and 2.063029 pixels which is larger than
2 X fitted extent = 1.641812 x 5.336690, not incorporating fit results
[Tue Feb 21 07:33:51 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 10.260170 pixels away
[Tue Feb 21 07:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:51 2012] Assessing source extent using major
[Tue Feb 21 07:33:51 2012] Source does appear to be extended
[Tue Feb 21 07:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:23:05 2012] XMMSAS src. selection expression = ellipse(19335.169296, 40239.944702, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 16:23:05 2012] Writing source region out to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src24_src.reg
[Tue Feb 21 16:23:05 2012] Extracting stamp from image fullrun_mos1_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (185, 426) - (260, 501)
[Tue Feb 21 16:23:05 2012] XMMSAS bgd. selection expression = annulus(19335.169296, 40239.944702, 1087.500000, 2175.000000, X, Y) && !ellipse(19704.224600, 38647.890000, 1373.408040, 1373.408040, 0.000000, X, Y) && !ellipse(19546.654000, 38849.124000, 393.723211, 393.723211, 0.000000, X, Y) && !ellipse(19953.172000, 38288.008000, 686.704020, 686.704020, 0.000000, X, Y) && !ellipse(18525.934400, 40230.244260, 464.292813, 464.292813, 0.000000, X, Y) && !ellipse(21268.090000, 37869.576000, 1002.368029, 248.061607, 25.723700, X, Y) && !ellipse(20736.383575, 38479.392120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19779.034439, 39705.989105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15779.838000, 39167.454000, 1677.528048, 1677.528048, 0.000000, X, Y) && !ellipse(16514.849823, 38136.035767, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Feb 21 16:23:05 2012] Writing fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src24.gif
[Tue Feb 21 16:43:52 2012] Mean detx,y = (12670.39, -8112.97) 
[Tue Feb 21 16:43:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:44:30 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:44:30 2012] Setting source spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Feb 21 16:44:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Tue Feb 21 18:53:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 21 18:53:49 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:17 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:17 2012] Error reading totcts from fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Tue Feb 21 20:29:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:20 2012] Using photon index=1.80, rate=0.00485, arf fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src24.arf
[Tue Feb 21 20:29:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:20 2012] Updating source flux to 1.5e-13
[Tue Feb 21 20:29:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting