[Sun Feb 19 14:18:14 2012] Detection parameters:
  Position = (465.3, 322.1) = 18 3 14.34 -21 37 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 370.9 +/- 25.7
  Background counts = 25.3
  Rate = 0.02 +/- 0.001

[Sun Feb 19 14:18:17 2012] Off-axis axis estimate = 12.22'
[Mon Feb 20 01:36:15 2012] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 01:36:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 01:36:15 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Mon Feb 20 01:36:15 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.918
[Mon Feb 20 01:36:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.54"
[Mon Feb 20 06:25:08 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Feb 20 06:25:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src1.csv
[Mon Feb 20 06:25:08 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Feb 20 06:25:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src1.csv
[Mon Feb 20 06:25:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 20 06:25:09 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 20 07:59:19 2012] Warning, spatial fit 1 centroid is now closest to src. 17
[Mon Feb 20 07:59:19 2012] Spatial fit model total counts = 1451.610000, observed total counts = 1448.000000
[Mon Feb 20 07:59:19 2012] Offset between fit and detection position for source 20 = 2.751849 pixels
[Mon Feb 20 07:59:19 2012] Warning, changing simple spatial fit ID from 1 to 8
[Mon Feb 20 07:59:19 2012] 1070.200900 total counts/ 975.327000 bgd. counts: snr = 3.037887
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.751849 pixels
  Position = (467.2, 320.1) = 18 3 13.74 -21 37 59.1
  Extent = 7.5 (6.5-8.9)", rotation angle = 0
  Source counts = 94.9 +/- 32.7
  Background counts = 975.3
  Rate = 0.002 +/- 0.0008
[Mon Feb 20 07:59:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:20 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 07:59:20 2012] Source does appear to be extended
[Mon Feb 20 07:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:20 2012] Source is confused with source 21
[Mon Feb 20 07:59:20 2012] Source is confused with source 17
[Mon Feb 20 07:59:20 2012] Source is confused with source 18
[Tue Feb 21 00:16:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:16:01 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Tue Feb 21 00:16:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.803
[Tue Feb 21 00:16:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.54"
[Tue Feb 21 05:29:46 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Feb 21 05:29:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 05:29:46 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Feb 21 05:29:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src1.csv
[Tue Feb 21 05:29:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Feb 21 05:29:48 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Feb 21 07:33:51 2012] Spatial fit model total counts = 953.959000, observed total counts = 954.000000
[Tue Feb 21 07:33:51 2012] Offset between fit and detection position for source 20 = 2.661817 pixels
[Tue Feb 21 07:33:51 2012] 404.290600 total counts/ 82.627600 bgd. counts: snr = 35.386576
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.661817 pixels
  Position = (465.3, 322.0) = 18 3 14.32 -21 37 50.9
  Extent = 8.7 (7.7-9.9)", rotation angle = 0
  Source counts = 321.7 +/- 20.1
  Background counts = 82.6
  Rate = 0.008 +/- 0.0005
[Tue Feb 21 07:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:51 2012] Assessing source extent using major axis lower bound
[Tue Feb 21 07:33:51 2012] Source does appear to be extended
[Tue Feb 21 07:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:23:04 2012] XMMSAS src. selection expression = ellipse(40436.422400, 27967.412600, 524.770815, 524.770815, 0.000000, X, Y)
[Tue Feb 21 16:23:04 2012] Writing source region out to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src20_src.reg
[Tue Feb 21 16:23:04 2012] Extracting stamp from image fullrun_mos1_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (435, 292) - (496, 352)
[Tue Feb 21 16:23:04 2012] XMMSAS bgd. selection expression = annulus(40436.422400, 27967.412600, 874.618025, 1749.236050, X, Y) && !ellipse(39937.982533, 27983.943386, 1278.495079, 534.293355, 1.976526, X, Y) && !ellipse(40748.750000, 28863.808760, 1441.280041, 532.239215, 2.615450, X, Y) && !ellipse(37989.239197, 28224.272430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41336.176000, 29075.662000, 719.333621, 719.333621, 0.000000, X, Y) && !ellipse(38650.391000, 29026.508000, 951.768027, 531.523215, 342.261500, X, Y) && !ellipse(42263.865570, 28830.604126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41045.387665, 27951.826599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38743.744000, 29116.585400, 1177.576034, 1177.576034, 0.000000, X, Y) && !ellipse(42964.132202, 28835.993835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38827.468005, 24968.390992, 2153.848062, 276.189321, 359.921661, X, Y)
[Tue Feb 21 16:23:04 2012] Writing fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src20.gif
[Tue Feb 21 16:23:11 2012] Mean detx,y = (793.18, 13127.60) 
[Tue Feb 21 16:23:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:23:39 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:23:40 2012] Setting source spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Feb 21 16:23:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Feb 21 20:29:15 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:15 2012] Error reading totcts from fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Feb 21 20:29:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:18 2012] Using photon index=1.80, rate=0.00768, arf fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src20.arf
[Tue Feb 21 20:29:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:18 2012] Updating source flux to 1.5e-13
[Tue Feb 21 20:29:29 2012] Flag c found in src. 20 procflags, skipping spectral fitting
[Tue Feb 21 20:38:14 2012] Reading fit data from xmm0503170101/analysis//spectral/fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src20_pl.csv
[Tue Feb 21 20:38:14 2012] Spectral fit parameter nH value = 5.01731e+22
[Tue Feb 21 20:38:14 2012] Spectral fit parameter PhoIndex value = 2.89677
[Tue Feb 21 20:38:14 2012] Failed to get F(0.3-8.0) from xmm0503170101/analysis//spectral/fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src20_pl.csv, possibly due to different flux energy range selected
[Tue Feb 21 20:38:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:38:14 2012] Using Nh = 5e+22, photon index=2.90, rate=0.00768, arf fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src20.arf
[Tue Feb 21 20:38:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:38:14 2012] Updating source flux to 3.1e-13