[Sun Feb 19 14:18:14 2012] Detection parameters:
  Position = (472.3, 321.8) = 18 3 12.13 -21 37 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 291.6 +/- 23.5
  Background counts = 25.5
  Rate = 0.007 +/- 0.0006

[Sun Feb 19 14:18:17 2012] Off-axis axis estimate = 12.72'
[Mon Feb 20 01:36:15 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 01:36:15 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Mon Feb 20 01:36:15 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.035
[Mon Feb 20 01:36:15 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 12.79"
[Mon Feb 20 06:25:08 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src21.ximg exists
[Mon Feb 20 06:25:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src21.csv
[Mon Feb 20 06:25:08 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Feb 20 06:25:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src21.csv
[Mon Feb 20 06:25:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Feb 20 06:25:10 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Mon Feb 20 07:59:19 2012] Source 18 is offset by -1.882602 and 1.614122 pixels which is larger than
2 X fitted extent = 1.534235 x 1.534235, not incorporating fit results
[Mon Feb 20 07:59:19 2012] Warning, spatial fit 21 centroid is now closest to src. 6
[Mon Feb 20 07:59:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:20 2012] Assessing source extent using major
[Mon Feb 20 07:59:20 2012] Source does appear to be extended
[Mon Feb 20 07:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 07:59:20 2012] Source is confused with source 20
[Tue Feb 21 00:16:01 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:16:01 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Tue Feb 21 00:16:01 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.035
[Tue Feb 21 00:16:01 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 12.79"
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src20.ximg exists
[Tue Feb 21 05:29:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src20.csv
[Tue Feb 21 05:29:47 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src20_1.ximg exists
[Tue Feb 21 05:29:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src20.csv
[Tue Feb 21 05:29:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Tue Feb 21 05:29:48 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Tue Feb 21 07:33:51 2012] Source 18 is offset by 2.925215 and -0.910943 pixels which is larger than
2 X fitted extent = 1.422110 x 1.422110, not incorporating fit results
[Tue Feb 21 07:33:51 2012] Warning, spatial fit 20 centroid is now closest to src. 6
[Tue Feb 21 07:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:51 2012] Assessing source extent using major
[Tue Feb 21 07:33:51 2012] Source does appear to be extended
[Tue Feb 21 07:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:23:04 2012] XMMSAS src. selection expression = ellipse(41045.387665, 27951.826599, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 16:23:04 2012] Writing source region out to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src18_src.reg
[Tue Feb 21 16:23:04 2012] Extracting stamp from image fullrun_mos1_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (435, 284) - (510, 359)
[Tue Feb 21 16:23:04 2012] XMMSAS bgd. selection expression = annulus(41045.387665, 27951.826599, 1087.500000, 2175.000000, X, Y) && !ellipse(40436.422400, 27967.412600, 699.694420, 699.694420, 0.000000, X, Y) && !ellipse(39937.982533, 27983.943386, 1278.495079, 534.293355, 1.976526, X, Y) && !ellipse(40748.750000, 28863.808760, 1441.280041, 532.239215, 2.615450, X, Y) && !ellipse(41336.176000, 29075.662000, 719.333621, 719.333621, 0.000000, X, Y) && !ellipse(38650.391000, 29026.508000, 951.768027, 531.523215, 342.261500, X, Y) && !ellipse(42263.865570, 28830.604126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38743.744000, 29116.585400, 1177.576034, 1177.576034, 0.000000, X, Y) && !ellipse(43582.985016, 25010.441772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42964.132202, 28835.993835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39544.082000, 24913.368000, 916.328026, 916.328026, 0.000000, X, Y) && !ellipse(38827.468005, 24968.390992, 2153.848062, 276.189321, 359.921661, X, Y)
[Tue Feb 21 16:23:04 2012] Writing fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src18.gif
[Tue Feb 21 16:33:32 2012] Mean detx,y = (792.32, 13730.29) 
[Tue Feb 21 16:33:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:33:55 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:33:55 2012] Setting source spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Feb 21 16:33:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Feb 21 18:13:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 21 18:13:03 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:16 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:16 2012] Error reading totcts from fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Feb 21 20:29:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:19 2012] Using photon index=1.80, rate=0.00696, arf fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src18.arf
[Tue Feb 21 20:29:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:19 2012] Updating source flux to 1.4e-13
[Tue Feb 21 20:29:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting