[Sun Feb 19 14:18:14 2012] Detection parameters:
  Position = (277.5, 404.2) = 18 4 12.92 -21 31 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 302.3 +/- 25.7
  Background counts = 21.3
  Rate = 0.01 +/- 0.001

[Sun Feb 19 14:18:17 2012] Off-axis axis estimate = 7.81'
[Mon Feb 20 01:36:15 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 01:36:15 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Mon Feb 20 01:36:15 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.907
[Mon Feb 20 01:36:15 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.34"
[Mon Feb 20 06:25:08 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src5.ximg exists
[Mon Feb 20 06:25:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src5.csv
[Mon Feb 20 06:25:08 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Feb 20 06:25:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src5.csv
[Mon Feb 20 06:25:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Feb 20 06:25:09 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Feb 20 06:25:09 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Feb 20 07:59:19 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.723944 pixels away
[Mon Feb 20 07:59:20 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 07:59:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 07:59:20 2012] Assessing source extent using major
[Mon Feb 20 07:59:20 2012] Source does appear to be extended
[Mon Feb 20 07:59:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 00:16:01 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Tue Feb 21 00:16:01 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Tue Feb 21 00:16:01 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.907
[Tue Feb 21 00:16:01 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.34"
[Tue Feb 21 05:29:46 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src5.ximg exists
[Tue Feb 21 05:29:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src5.csv
[Tue Feb 21 05:29:46 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Feb 21 05:29:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src5.csv
[Tue Feb 21 05:29:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Feb 21 05:29:48 2012] fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Feb 21 05:29:48 2012] Fit fullrun_mos1_xmm0503170101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Feb 21 07:33:51 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.723944 pixels away
[Tue Feb 21 07:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Feb 21 07:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 21 07:33:51 2012] Assessing source extent using major
[Tue Feb 21 07:33:51 2012] Source does appear to be extended
[Tue Feb 21 07:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 21 16:23:04 2012] XMMSAS src. selection expression = ellipse(24091.663574, 35114.362854, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Feb 21 16:23:04 2012] Writing source region out to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src16_src.reg
[Tue Feb 21 16:23:04 2012] Extracting stamp from image fullrun_mos1_xmm0503170101_pi300-10000_cl_sm2.00.img.gz, (240, 367) - (315, 442)
[Tue Feb 21 16:23:04 2012] XMMSAS bgd. selection expression = annulus(24091.663574, 35114.362854, 1087.500000, 2175.000000, X, Y) && !ellipse(22773.974000, 35271.716800, 607.745617, 607.745617, 0.000000, X, Y) && !ellipse(23559.844000, 34630.342200, 353.802410, 353.802410, 0.000000, X, Y) && !ellipse(23615.061920, 35612.236603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21268.090000, 37869.576000, 1002.368029, 248.061607, 25.723700, X, Y) && !ellipse(27035.774618, 33293.584111, 1799.506773, 730.101079, 24.981456, X, Y) && !ellipse(26585.618000, 32726.836800, 1934.536056, 1934.536056, -0.000000, X, Y)
[Tue Feb 21 16:23:04 2012] Writing fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src16.gif
[Tue Feb 21 16:25:38 2012] Mean detx,y = (7839.09, -3263.78) 
[Tue Feb 21 16:25:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Feb 21 16:26:07 2012] Binned source spectrum to 10 counts/bin
[Tue Feb 21 16:26:07 2012] Setting source spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Feb 21 16:26:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Feb 21 17:17:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Feb 21 17:17:35 2012] rmf not generated due to insufficient counts
[Tue Feb 21 20:29:15 2012] Updating aperture counts using extracted products
[Tue Feb 21 20:29:15 2012] Error reading totcts from fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Feb 21 20:29:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 21 20:29:18 2012] Using photon index=1.80, rate=0.0144, arf fullrun_mos1_xmm0503170101_pi300-10000_pass1_cl_src16.arf
[Tue Feb 21 20:29:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Feb 21 20:29:18 2012] Updating source flux to 2.6e-13
[Tue Feb 21 20:29:29 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting