[Mon Jul 30 07:01:19 2012] Detection parameters:
  Position = (318.6, 286.7) = 2 31 42.65 89 15 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.9 +/- 15.6
  Background counts = 8.7
  Rate = 0.02 +/- 0.002

[Mon Jul 30 07:01:20 2012] Off-axis axis estimate = 1.69'
[Mon Jul 30 07:02:38 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 07:02:38 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Mon Jul 30 07:02:38 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.060
[Mon Jul 30 07:02:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Mon Jul 30 07:20:58 2012] fullrun_pn_xmm0503140401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 30 07:20:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503140401_pi300-10000_cl_pass0_src1.csv
[Mon Jul 30 07:20:58 2012] fullrun_pn_xmm0503140401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 30 07:20:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503140401_pi300-10000_cl_pass0_src1.csv
[Mon Jul 30 07:20:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503140401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503140401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:20:58 2012] fullrun_pn_xmm0503140401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 30 07:20:58 2012] fullrun_pn_xmm0503140401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 30 07:20:58 2012] Fit fullrun_pn_xmm0503140401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul 30 07:44:39 2012] Spatial fit model total counts = 247.000000, observed total counts = 247.000000
[Mon Jul 30 07:44:39 2012] Offset between fit and detection position for source 1 = 0.249388 pixels
[Mon Jul 30 07:44:39 2012] 247.002000 total counts/ 146.884000 bgd. counts: snr = 8.260853
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.249388 pixels
  Position = (318.4, 286.6) = 2 31 47.45 89 15 52.0
  Extent = 5.3 (4.3-6.5)", rotation angle = 0
  Source counts = 100.1 +/- 15.7
  Background counts = 146.9
  Rate = 0.01 +/- 0.002
[Mon Jul 30 07:44:39 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:44:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:44:39 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 07:44:39 2012] Source does appear to be extended
[Mon Jul 30 07:44:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 07:44:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 30 07:44:47 2012] Initial guess for spatial extent in simple fitting = 5.33"
[Mon Jul 30 07:44:47 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.755
[Mon Jul 30 07:44:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.33"
[Mon Jul 30 08:02:10 2012] fullrun_pn_xmm0503140401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 30 08:02:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503140401_pi300-10000_cl_pass1_src1.csv
[Mon Jul 30 08:02:10 2012] fullrun_pn_xmm0503140401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 30 08:02:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503140401_pi300-10000_cl_pass1_src1.csv
[Mon Jul 30 08:02:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503140401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503140401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 08:02:10 2012] fullrun_pn_xmm0503140401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 30 08:02:10 2012] fullrun_pn_xmm0503140401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 30 08:02:10 2012] Fit fullrun_pn_xmm0503140401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 30 08:23:52 2012] Spatial fit model total counts = 246.999000, observed total counts = 247.000000
[Mon Jul 30 08:23:52 2012] Offset between fit and detection position for source 1 = 0.018164 pixels
[Mon Jul 30 08:23:52 2012] 245.536000 total counts/ 143.934000 bgd. counts: snr = 8.468774
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.018164 pixels
  Position = (318.4, 286.6) = 2 31 47.08 89 15 52.0
  Extent = 5.4 (4.4-6.7)", rotation angle = 0
  Source counts = 101.6 +/- 15.7
  Background counts = 143.9
  Rate = 0.01 +/- 0.002
[Mon Jul 30 08:23:52 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 08:23:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 08:23:52 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 08:23:52 2012] Source does appear to be extended
[Mon Jul 30 08:23:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 08:23:59 2012] XMMSAS src. selection expression = ellipse(27654.573000, 24885.236000, 325.068609, 325.068609, 0.000000, X, Y)
[Mon Jul 30 08:23:59 2012] Writing source region out to fullrun_pn_xmm0503140401_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 30 08:23:59 2012] Extracting stamp from image fullrun_pn_xmm0503140401_pi300-10000_cl_sm2.00.img.gz, (300, 268) - (337, 305)
[Mon Jul 30 08:23:59 2012] XMMSAS bgd. selection expression = annulus(27654.573000, 24885.236000, 541.781016, 1083.562031, X, Y) && !ellipse(28766.838287, 25329.398407, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 08:23:59 2012] Writing fullrun_pn_xmm0503140401_pi300-10000_pass1_cl_src1.gif
[Mon Jul 30 08:24:05 2012] Mean detx,y = (24.35, -232.25) 
[Mon Jul 30 08:24:07 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 08:24:19 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 08:24:19 2012] Setting source spectrum file to fullrun_pn_xmm0503140401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 30 08:24:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0503140401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 30 08:43:40 2012] Updating aperture counts using extracted products
[Mon Jul 30 08:43:40 2012] Error reading totcts from fullrun_pn_xmm0503140401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 30 08:43:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 08:43:40 2012] Using photon index=1.80, rate=0.0117, arf fullrun_pn_xmm0503140401_pi300-10000_pass1_cl_src1.arf
[Mon Jul 30 08:43:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 08:43:40 2012] Updating source flux to 4.7e-14
[Mon Jul 30 08:44:04 2012] Reading fit data from xmm0503140401/analysis//spectral/fullrun_pn_xmm0503140401_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 30 08:44:04 2012] Spectral fit parameter nH value = 9.92982e+21
[Mon Jul 30 08:44:04 2012] Spectral fit parameter PhoIndex value = 9.884
[Mon Jul 30 08:44:04 2012] Failed to get F(0.3-8.0) from xmm0503140401/analysis//spectral/fullrun_pn_xmm0503140401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 30 08:44:04 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 08:44:04 2012] Using Nh = 9.9e+21, photon index=9.88, rate=0.0117, arf fullrun_pn_xmm0503140401_pi300-10000_pass1_cl_src1.arf
[Mon Jul 30 08:44:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 08:44:04 2012] Updating source flux to 2.5e-14