[Mon Jul 30 07:01:36 2012] Detection parameters:
  Position = (226.8, 164.0) = 3 1 42.33 89 6 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.5 +/- 9.6
  Background counts = 4.3
  Rate = 0.003 +/- 0.0006

[Mon Jul 30 07:01:36 2012] Off-axis axis estimate = 11.05'
[Mon Jul 30 07:20:59 2012] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 07:20:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 30 07:20:59 2012] Initial guess for spatial extent in simple fitting = 11.95"
[Mon Jul 30 07:20:59 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.853
[Mon Jul 30 07:20:59 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.95"
[Mon Jul 30 07:31:01 2012] fullrun_mos1_xmm0503140401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jul 30 07:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503140401_pi300-10000_cl_pass0_src3.csv
[Mon Jul 30 07:31:01 2012] fullrun_mos1_xmm0503140401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jul 30 07:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0503140401_pi300-10000_cl_pass0_src3.csv
[Mon Jul 30 07:31:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0503140401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0503140401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 30 07:31:01 2012] fullrun_mos1_xmm0503140401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jul 30 07:31:01 2012] fullrun_mos1_xmm0503140401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jul 30 07:31:01 2012] Fit fullrun_mos1_xmm0503140401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jul 30 07:44:40 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Mon Jul 30 07:44:40 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 07:44:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 07:44:40 2012] Assessing source extent using major
[Mon Jul 30 07:44:40 2012] Source does appear to be extended
[Mon Jul 30 07:44:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 08:02:10 2012] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Mon Jul 30 08:02:10 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 30 08:02:10 2012] Initial guess for spatial extent in simple fitting = 11.95"
[Mon Jul 30 08:02:10 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.853
[Mon Jul 30 08:02:10 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.95"
[Mon Jul 30 08:12:19 2012] fullrun_mos1_xmm0503140401_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul 30 08:12:19 2012] fullrun_mos1_xmm0503140401_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul 30 08:12:19 2012] Fit fullrun_mos1_xmm0503140401_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon Jul 30 08:12:19 2012] fullrun_mos1_xmm0503140401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul 30 08:12:19 2012] fullrun_mos1_xmm0503140401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul 30 08:12:19 2012] Fit fullrun_mos1_xmm0503140401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jul 30 08:23:53 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 161.201351 pixels away
[Mon Jul 30 08:23:53 2012] Spatial fit model total counts = 115.758000, observed total counts = 116.000000
[Mon Jul 30 08:23:53 2012] Offset between fit and detection position for source 1 = 0.091880 pixels
[Mon Jul 30 08:23:53 2012] 114.347800 total counts/ 83.532600 bgd. counts: snr = 3.371607
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.091880 pixels
  Position = (226.9, 163.9) = 3 1 40.39 89 6 44.6
  Extent = 5.5 (4.0-8.2)", rotation angle = 0
  Source counts = 30.8 +/- 10.7
  Background counts = 83.5
  Rate = 0.002 +/- 0.0006
[Mon Jul 30 08:23:53 2012] Vigneting correction estimate = 1.000000
[Mon Jul 30 08:23:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 30 08:23:53 2012] Assessing source extent using major axis lower bound
[Mon Jul 30 08:23:53 2012] Source does appear to be extended
[Mon Jul 30 08:23:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 08:40:18 2012] XMMSAS src. selection expression = ellipse(19690.095800, 14212.952400, 329.755809, 329.755809, 0.000000, X, Y)
[Mon Jul 30 08:40:18 2012] Writing source region out to fullrun_mos1_xmm0503140401_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 30 08:40:18 2012] Extracting stamp from image fullrun_mos1_xmm0503140401_pi300-10000_cl_sm2.00.img.gz, (208, 145) - (246, 183)
[Mon Jul 30 08:40:18 2012] XMMSAS bgd. selection expression = annulus(19690.095800, 14212.952400, 549.593016, 1099.186032, X, Y) && !ellipse(20225.859020, 15108.428400, 742.616821, 742.616821, 0.000000, X, Y)
[Mon Jul 30 08:40:18 2012] Writing fullrun_mos1_xmm0503140401_pi300-10000_pass1_cl_src1.gif
[Mon Jul 30 08:40:37 2012] Mean detx,y = (-7877.27, 10221.29) 
[Mon Jul 30 08:40:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 08:40:44 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 08:40:44 2012] Setting source spectrum file to fullrun_mos1_xmm0503140401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 30 08:40:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0503140401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 30 08:41:21 2012] Not generating rmf since there are only 30 counts
[Mon Jul 30 08:41:21 2012] rmf not generated due to insufficient counts
[Mon Jul 30 08:43:40 2012] Updating aperture counts using extracted products
[Mon Jul 30 08:43:40 2012] Error reading totcts from fullrun_mos1_xmm0503140401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 30 08:43:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 30 08:43:40 2012] Using photon index=1.80, rate=0.00177, arf fullrun_mos1_xmm0503140401_pi300-10000_pass1_cl_src1.arf
[Mon Jul 30 08:43:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 30 08:43:40 2012] Updating source flux to 4.7e-14
[Mon Jul 30 08:43:41 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jul 30 08:43:42 2012] xmm0503140401/analysis//spectral/fullrun_mos1_xmm0503140401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete