[Sun Nov 27 02:19:42 2011] Detection parameters:
  Position = (469.0, 301.7) = 0 45 51.07 -73 40 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.6 +/- 17.2
  Background counts = 18.3
  Rate = 0.01 +/- 0.0009

[Sun Nov 27 02:19:43 2011] Off-axis axis estimate = 12.37'
[Sun Nov 27 02:23:15 2011] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 02:23:15 2011] Initial guess for spatial extent in simple fitting = 12.61"
[Sun Nov 27 02:23:15 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.909
[Sun Nov 27 02:23:15 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 12.61"
[Sun Nov 27 03:11:19 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src6.ximg exists
[Sun Nov 27 03:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src6.csv
[Sun Nov 27 03:11:19 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Nov 27 03:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src6.csv
[Sun Nov 27 03:11:19 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 03:11:19 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Nov 27 03:11:19 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Nov 27 03:11:19 2011] Fit fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Nov 27 04:12:34 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 15.252007 pixels away
[Sun Nov 27 04:12:34 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 04:12:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 04:12:34 2011] Assessing source extent using major
[Sun Nov 27 04:12:34 2011] Source does appear to be extended
[Sun Nov 27 04:12:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 04:12:56 2011] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 04:12:56 2011] Initial guess for spatial extent in simple fitting = 12.61"
[Sun Nov 27 04:12:56 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.909
[Sun Nov 27 04:12:56 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 12.61"
[Sun Nov 27 05:01:37 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src6.ximg exists
[Sun Nov 27 05:01:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src6.csv
[Sun Nov 27 05:01:37 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Nov 27 05:01:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src6.csv
[Sun Nov 27 05:01:37 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 05:01:37 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Nov 27 05:01:37 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Nov 27 05:01:37 2011] Fit fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Nov 27 05:56:28 2011] Spatial fit model total counts = 331.000000, observed total counts = 331.000000
[Sun Nov 27 05:56:28 2011] Offset between fit and detection position for source 6 = 0.415361 pixels
[Sun Nov 27 05:56:28 2011] 327.431000 total counts/ 179.279000 bgd. counts: snr = 11.064781
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.415361 pixels
  Position = (468.6, 301.5) = 0 45 51.45 -73 40 18.7
  Extent = 6.3 (5.5-7.5)", rotation angle = 0
  Source counts = 148.2 +/- 18.1
  Background counts = 179.3
  Rate = 0.008 +/- 0.001
[Sun Nov 27 05:56:28 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 05:56:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 05:56:28 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 05:56:28 2011] Source does appear to be extended
[Sun Nov 27 05:56:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 05:56:49 2011] XMMSAS src. selection expression = ellipse(40720.110500, 26185.872800, 375.855611, 375.855611, 0.000000, X, Y)
[Sun Nov 27 05:56:49 2011] Writing source region out to fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src6_src.reg
[Sun Nov 27 05:56:49 2011] Extracting stamp from image fullrun_pn_xmm0503000201_pi300-10000_cl_sm2.00.img.gz, (447, 280) - (490, 323)
[Sun Nov 27 05:56:49 2011] XMMSAS bgd. selection expression = annulus(40720.110500, 26185.872800, 626.426018, 1252.852036, X, Y)
[Sun Nov 27 05:56:49 2011] Writing fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src6.gif
[Sun Nov 27 06:02:15 2011] Mean detx,y = (3788.72, -12507.84) 
[Sun Nov 27 06:02:19 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 06:03:03 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 06:03:04 2011] Setting source spectrum file to fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Nov 27 06:03:04 2011] Setting bgd. spectrum file to fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Nov 27 07:11:21 2011] Updating aperture counts using extracted products
[Sun Nov 27 07:11:21 2011] Error reading totcts from fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Nov 27 07:11:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 07:11:22 2011] Using photon index=1.80, rate=0.00786, arf fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src6.arf
[Sun Nov 27 07:11:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 07:11:22 2011] Updating source flux to 9.9e-14