[Sun Nov 27 02:19:42 2011] Detection parameters:
  Position = (483.3, 369.2) = 0 45 37.21 -73 35 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.1 +/- 13.7
  Background counts = 16.7
  Rate = 0.005 +/- 0.0007

[Sun Nov 27 02:19:43 2011] Off-axis axis estimate = 14.35'
[Sun Nov 27 02:23:15 2011] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 02:23:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 02:23:15 2011] Initial guess for spatial extent in simple fitting = 13.60"
[Sun Nov 27 02:23:15 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.931
[Sun Nov 27 02:23:15 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 13.60"
[Sun Nov 27 03:11:19 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Nov 27 03:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src3.csv
[Sun Nov 27 03:11:19 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Nov 27 03:11:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src3.csv
[Sun Nov 27 03:11:19 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 03:11:19 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Nov 27 03:11:19 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Nov 27 03:11:19 2011] Fit fullrun_pn_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Nov 27 04:12:34 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.367680 pixels away
[Sun Nov 27 04:12:34 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 04:12:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 04:12:34 2011] Assessing source extent using major
[Sun Nov 27 04:12:34 2011] Source does appear to be extended
[Sun Nov 27 04:12:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 04:12:56 2011] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 04:12:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov 27 04:12:56 2011] Initial guess for spatial extent in simple fitting = 13.60"
[Sun Nov 27 04:12:56 2011] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.931
[Sun Nov 27 04:12:56 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 13.60"
[Sun Nov 27 05:01:37 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Nov 27 05:01:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src3.csv
[Sun Nov 27 05:01:37 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Nov 27 05:01:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src3.csv
[Sun Nov 27 05:01:37 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 05:01:37 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Nov 27 05:01:37 2011] fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Nov 27 05:01:37 2011] Fit fullrun_pn_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Nov 27 05:56:28 2011] Spatial fit model total counts = 321.999000, observed total counts = 322.000000
[Sun Nov 27 05:56:28 2011] Offset between fit and detection position for source 3 = 0.616957 pixels
[Sun Nov 27 05:56:28 2011] 321.958600 total counts/ 251.808000 bgd. counts: snr = 4.420757
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.616957 pixels
  Position = (482.7, 369.4) = 0 45 37.81 -73 35 22.9
  Extent = 6.6 (4.4-9.3)", rotation angle = 0
  Source counts = 70.2 +/- 17.9
  Background counts = 251.8
  Rate = 0.004 +/- 0.001
[Sun Nov 27 05:56:28 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 05:56:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 05:56:28 2011] Assessing source extent using major axis lower bound
[Sun Nov 27 05:56:28 2011] Source does appear to be extended
[Sun Nov 27 05:56:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 05:56:49 2011] XMMSAS src. selection expression = ellipse(41948.690640, 32087.829200, 395.694011, 395.694011, 0.000000, X, Y)
[Sun Nov 27 05:56:49 2011] Writing source region out to fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src3_src.reg
[Sun Nov 27 05:56:49 2011] Extracting stamp from image fullrun_pn_xmm0503000201_pi300-10000_cl_sm2.00.img.gz, (460, 347) - (505, 392)
[Sun Nov 27 05:56:49 2011] XMMSAS bgd. selection expression = annulus(41948.690640, 32087.829200, 659.490019, 1318.980038, X, Y)
[Sun Nov 27 05:56:49 2011] Writing fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src3.gif
[Sun Nov 27 05:59:19 2011] Mean detx,y = (-1348.94, -15694.26) 
[Sun Nov 27 05:59:25 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 06:00:08 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 06:00:09 2011] Setting source spectrum file to fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Nov 27 06:00:09 2011] Setting bgd. spectrum file to fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Nov 27 06:24:33 2011] Not generating rmf since there are only 70 counts
[Sun Nov 27 06:24:33 2011] rmf not generated due to insufficient counts
[Sun Nov 27 07:11:21 2011] Updating aperture counts using extracted products
[Sun Nov 27 07:11:21 2011] Error reading totcts from fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Nov 27 07:11:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 07:11:22 2011] Using photon index=1.80, rate=0.00372, arf fullrun_pn_xmm0503000201_pi300-10000_pass1_cl_src3.arf
[Sun Nov 27 07:11:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 07:11:22 2011] Updating source flux to 3.4e-14
[Sun Nov 27 07:12:19 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting