[Sun Nov 27 02:20:49 2011] Detection parameters:
  Position = (184.9, 337.1) = 0 50 43.82 -73 37 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.7 +/- 8.6
  Background counts = 7.7
  Rate = 0.002 +/- 0.0004

[Sun Nov 27 02:20:49 2011] Off-axis axis estimate = 8.70'
[Sun Nov 27 03:41:55 2011] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 03:41:55 2011] Initial guess for spatial extent in simple fitting = 10.78"
[Sun Nov 27 03:41:55 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.015
[Sun Nov 27 03:41:55 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 10.78"
[Sun Nov 27 04:12:27 2011] fullrun_mos2_xmm0503000201_pi300-10000_cl_pass0_src9.ximg exists
[Sun Nov 27 04:12:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503000201_pi300-10000_cl_pass0_src9.csv
[Sun Nov 27 04:12:27 2011] fullrun_mos2_xmm0503000201_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Nov 27 04:12:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0503000201_pi300-10000_cl_pass0_src9.csv
[Sun Nov 27 04:12:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0503000201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0503000201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 04:12:27 2011] fullrun_mos2_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Nov 27 04:12:27 2011] fullrun_mos2_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Nov 27 04:12:27 2011] Fit fullrun_mos2_xmm0503000201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Nov 27 04:12:43 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.295620 pixels away
[Sun Nov 27 04:12:43 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 04:12:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 04:12:43 2011] Assessing source extent using major
[Sun Nov 27 04:12:43 2011] Source does appear to be extended
[Sun Nov 27 04:12:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 05:29:49 2011] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 05:29:49 2011] Initial guess for spatial extent in simple fitting = 10.78"
[Sun Nov 27 05:29:49 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.015
[Sun Nov 27 05:29:49 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 10.78"
[Sun Nov 27 05:56:20 2011] fullrun_mos2_xmm0503000201_pi300-10000_cl_pass1_src8.ximg exists
[Sun Nov 27 05:56:20 2011] fullrun_mos2_xmm0503000201_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Nov 27 05:56:20 2011] Fit fullrun_mos2_xmm0503000201_pi300-10000_cl_pass1_src8 appears to have run properly
[Sun Nov 27 05:56:20 2011] fullrun_mos2_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Nov 27 05:56:20 2011] fullrun_mos2_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Nov 27 05:56:20 2011] Fit fullrun_mos2_xmm0503000201_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Nov 27 05:56:36 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 19.625758 pixels away
[Sun Nov 27 05:56:36 2011] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.229573 pixels away
[Sun Nov 27 05:56:36 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 05:56:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 05:56:36 2011] Assessing source extent using major
[Sun Nov 27 05:56:36 2011] Source does appear to be extended
[Sun Nov 27 05:56:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 06:52:16 2011] XMMSAS src. selection expression = ellipse(16036.438766, 29277.647339, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Nov 27 06:52:16 2011] Writing source region out to fullrun_mos2_xmm0503000201_pi300-10000_pass1_cl_src6_src.reg
[Sun Nov 27 06:52:16 2011] Extracting stamp from image fullrun_mos2_xmm0503000201_pi300-10000_cl_sm2.00.img.gz, (147, 300) - (222, 375)
[Sun Nov 27 06:52:16 2011] XMMSAS bgd. selection expression = annulus(16036.438766, 29277.647339, 1087.500000, 2175.000000, X, Y) && !ellipse(17678.973000, 27251.141060, 553.653616, 553.653616, 0.000000, X, Y)
[Sun Nov 27 06:52:16 2011] Writing fullrun_mos2_xmm0503000201_pi300-10000_pass1_cl_src6.gif
[Sun Nov 27 06:56:19 2011] Mean detx,y = (7683.63, -9801.89) 
[Sun Nov 27 06:56:22 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 06:56:38 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 06:56:38 2011] Setting source spectrum file to fullrun_mos2_xmm0503000201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Nov 27 06:56:38 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0503000201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Nov 27 07:10:13 2011] Not generating rmf since there are only 39 counts
[Sun Nov 27 07:10:13 2011] rmf not generated due to insufficient counts
[Sun Nov 27 07:11:25 2011] Updating aperture counts using extracted products
[Sun Nov 27 07:11:25 2011] Error reading totcts from fullrun_mos2_xmm0503000201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Nov 27 07:11:26 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 07:11:26 2011] Using photon index=1.80, rate=0.00195, arf fullrun_mos2_xmm0503000201_pi300-10000_pass1_cl_src6.arf
[Sun Nov 27 07:11:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 07:11:26 2011] Updating source flux to 4.1e-14
[Sun Nov 27 07:11:59 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting